rfc9644.original   rfc9644.txt 
NETCONF Working Group K. Watsen Internet Engineering Task Force (IETF) K. Watsen
Internet-Draft Watsen Networks Request for Comments: 9644 Watsen Networks
Intended status: Standards Track 16 March 2024 Category: Standards Track September 2024
Expires: 17 September 2024 ISSN: 2070-1721
YANG Groupings for SSH Clients and SSH Servers YANG Groupings for SSH Clients and SSH Servers
draft-ietf-netconf-ssh-client-server-40
Abstract Abstract
This document presents seven YANG 1.1 modules. Three IETF modules, This document presents three IETF-defined YANG modules and a script
and four supporting IANA modules. used to create four supporting IANA modules.
The three IETF modules are: ietf-ssh-common, ietf-ssh-client, and The three IETF modules are ietf-ssh-common, ietf-ssh-client, and
ietf-ssh-server. The "ietf-ssh-client" and "ietf-ssh-server" modules ietf-ssh-server. The "ietf-ssh-client" and "ietf-ssh-server" modules
are the primary productions of this work, supporting the are the primary productions of this work, supporting the
configuration and monitoring of SSH clients and servers. configuration and monitoring of Secure Shell (SSH) clients and
servers.
The four IANA modules are: iana-ssh-encryption-algs, iana-ssh-key- The four IANA modules are iana-ssh-encryption-algs, iana-ssh-key-
exchange-algs, iana-ssh-mac-algs, and iana-ssh-public-key-algs. exchange-algs, iana-ssh-mac-algs, and iana-ssh-public-key-algs.
These modules each define YANG enumerations providing support for an These modules each define YANG enumerations providing support for an
IANA-maintained algorithm registry. IANA-maintained algorithm registry.
Editorial Note (To be removed by RFC Editor)
This draft contains placeholder values that need to be replaced with
finalized values at the time of publication. This note summarizes
all of the substitutions that are needed. No other RFC Editor
instructions are specified elsewhere in this document.
Artwork in this document contains shorthand references to drafts in
progress. Please apply the following replacements:
* AAAA --> the assigned RFC value for draft-ietf-netconf-crypto-
types
* BBBB --> the assigned RFC value for draft-ietf-netconf-trust-
anchors
* CCCC --> the assigned RFC value for draft-ietf-netconf-keystore
* DDDD --> the assigned RFC value for draft-ietf-netconf-tcp-client-
server
* EEEE --> the assigned RFC value for this draft
Artwork in this document contains placeholder values for the date of
publication of this draft. Please apply the following replacement:
* 2024-03-16 --> the publication date of this draft
The "Relation to other RFCs" section Section 1.2 contains the text
"one or more YANG modules" and, later, "modules". This text is
sourced from a file in a context where it is unknown how many modules
a draft defines. The text is not wrong as is, but it may be improved
by stating more directly how many modules are defined.
The "Relation to other RFCs" section Section 1.2 contains a self-
reference to this draft, along with a corresponding reference in the
Appendix. Please replace the self-reference in this section with
"This RFC" (or similar) and remove the self-reference in the
"Normative/Informative References" section, whichever it is in.
Tree-diagrams in this draft may use the '\' line-folding mode defined
in RFC 8792. However, nicer-to-the-eye is when the '\\' line-folding
mode is used. The AD suggested suggested putting a request here for
the RFC Editor to help convert "ugly" '\' folded examples to use the
'\\' folding mode. "Help convert" may be interpreted as, identify
what looks ugly and ask the authors to make the adjustment.
The following Appendix sections are to be removed prior to
publication:
* Appendix A.1. Initial Module for the "Encryption Algorithm Names"
Registry
* Appendix A.2. Initial Module for the "MAC Algorithm Names"
Registry
* Appendix A.3. Initial Module for the "Public Key Algorithm Names"
Registry
* Appendix A.4. Initial Module for the "Key Exchange Method Names"
Registry
* Appendix B. Change Log
Status of This Memo Status of This Memo
This Internet-Draft is submitted in full conformance with the This is an Internet Standards Track document.
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months This document is a product of the Internet Engineering Task Force
and may be updated, replaced, or obsoleted by other documents at any (IETF). It represents the consensus of the IETF community. It has
time. It is inappropriate to use Internet-Drafts as reference received public review and has been approved for publication by the
material or to cite them other than as "work in progress." Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
This Internet-Draft will expire on 17 September 2024. Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/rfc9644.
Copyright Notice Copyright Notice
Copyright (c) 2024 IETF Trust and the persons identified as the Copyright (c) 2024 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/ Provisions Relating to IETF Documents
license-info) in effect on the date of publication of this document. (https://trustee.ietf.org/license-info) in effect on the date of
Please review these documents carefully, as they describe your rights publication of this document. Please review these documents
and restrictions with respect to this document. Code Components carefully, as they describe your rights and restrictions with respect
extracted from this document must include Revised BSD License text as to this document. Code Components extracted from this document must
described in Section 4.e of the Trust Legal Provisions and are include Revised BSD License text as described in Section 4.e of the
provided without warranty as described in the Revised BSD License. Trust Legal Provisions and are provided without warranty as described
in the Revised BSD License.
Table of Contents Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 5 1. Introduction
1.1. Regarding the IETF Modules . . . . . . . . . . . . . . . 6 1.1. Regarding the Three IETF Modules
1.2. Relation to other RFCs . . . . . . . . . . . . . . . . . 6 1.2. Relation to Other RFCs
1.3. Specification Language . . . . . . . . . . . . . . . . . 8 1.3. Specification Language
1.4. Adherence to the NMDA . . . . . . . . . . . . . . . . . . 8 1.4. Adherence to the NMDA
1.5. Conventions . . . . . . . . . . . . . . . . . . . . . . . 8 1.5. Conventions
2. The "ietf-ssh-common" Module . . . . . . . . . . . . . . . . 9 2. The "ietf-ssh-common" Module
2.1. Data Model Overview . . . . . . . . . . . . . . . . . . . 9 2.1. Data Model Overview
2.2. Example Usage . . . . . . . . . . . . . . . . . . . . . . 12 2.2. Example Usage
2.3. YANG Module . . . . . . . . . . . . . . . . . . . . . . . 14 2.3. YANG Module
3. The "ietf-ssh-client" Module . . . . . . . . . . . . . . . . 24 3. The "ietf-ssh-client" Module
3.1. Data Model Overview . . . . . . . . . . . . . . . . . . . 24 3.1. Data Model Overview
3.2. Example Usage . . . . . . . . . . . . . . . . . . . . . . 27 3.2. Example Usage
3.3. YANG Module . . . . . . . . . . . . . . . . . . . . . . . 31 3.3. YANG Module
4. The "ietf-ssh-server" Module . . . . . . . . . . . . . . . . 39 4. The "ietf-ssh-server" Module
4.1. Data Model Overview . . . . . . . . . . . . . . . . . . . 39 4.1. Data Model Overview
4.2. Example Usage . . . . . . . . . . . . . . . . . . . . . . 41 4.2. Example Usage
4.3. YANG Module . . . . . . . . . . . . . . . . . . . . . . . 45 4.3. YANG Module
5. Security Considerations . . . . . . . . . . . . . . . . . . . 54 5. Security Considerations
5.1. Considerations for the "iana-ssh-key-exchange-algs" 5.1. Considerations for the "iana-ssh-key-exchange-algs" Module
Module . . . . . . . . . . . . . . . . . . . . . . . . . 54 5.2. Considerations for the "iana-ssh-encryption-algs" Module
5.2. Considerations for the "iana-ssh-encryption-algs" 5.3. Considerations for the "iana-ssh-mac-algs" Module
Module . . . . . . . . . . . . . . . . . . . . . . . . . 55 5.4. Considerations for the "iana-ssh-public-key-algs" Module
5.3. Considerations for the "iana-ssh-mac-algs" Module . . . . 56 5.5. Considerations for the "ietf-ssh-common" YANG Module
5.4. Considerations for the "iana-ssh-public-key-algs" 5.6. Considerations for the "ietf-ssh-client" YANG Module
Module . . . . . . . . . . . . . . . . . . . . . . . . . 56 5.7. Considerations for the "ietf-ssh-server" YANG Module
5.5. Considerations for the "ietf-ssh-common" YANG Module . . 57 6. IANA Considerations
5.6. Considerations for the "ietf-ssh-client" YANG Module . . 57 6.1. The IETF XML Registry
5.7. Considerations for the "ietf-ssh-server" YANG Module . . 58 6.2. The YANG Module Names Registry
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 59 6.3. Considerations for the "iana-ssh-encryption-algs" Module
6.1. The "IETF XML" Registry . . . . . . . . . . . . . . . . . 59 6.4. Considerations for the "iana-ssh-mac-algs" Module
6.2. The "YANG Module Names" Registry . . . . . . . . . . . . 60 6.5. Considerations for the "iana-ssh-public-key-algs" Module
6.3. Considerations for the "iana-ssh-encryption-algs" 6.6. Considerations for the "iana-ssh-key-exchange-algs" Module
Module . . . . . . . . . . . . . . . . . . . . . . . . . 61 7. References
6.4. Considerations for the "iana-ssh-mac-algs" Module . . . . 63 7.1. Normative References
6.5. Considerations for the "iana-ssh-public-key-algs" 7.2. Informative References
Module . . . . . . . . . . . . . . . . . . . . . . . . . 64 Appendix A. Script to Generate IANA-Maintained YANG Modules
6.6. Considerations for the "iana-ssh-key-exchange-algs" Acknowledgements
Module . . . . . . . . . . . . . . . . . . . . . . . . . 66 Contributors
7. References . . . . . . . . . . . . . . . . . . . . . . . . . 68 Author's Address
7.1. Normative References . . . . . . . . . . . . . . . . . . 68
7.2. Informative References . . . . . . . . . . . . . . . . . 70
Appendix A. Script to Generate IANA-Maintained YANG Modules . . 73
A.1. Initial Module for the "Encryption Algorithm Names"
Registry . . . . . . . . . . . . . . . . . . . . . . . . 80
A.2. Initial Module for the "MAC Algorithm Names" Registry . . 88
A.3. Initial Module for the "Public Key Algorithm Names"
Registry . . . . . . . . . . . . . . . . . . . . . . . . 91
A.4. Initial Module for the "Key Exchange Method Names"
Registry . . . . . . . . . . . . . . . . . . . . . . . . 99
Appendix B. Change Log . . . . . . . . . . . . . . . . . . . . . 143
B.1. 00 to 01 . . . . . . . . . . . . . . . . . . . . . . . . 143
B.2. 01 to 02 . . . . . . . . . . . . . . . . . . . . . . . . 143
B.3. 02 to 03 . . . . . . . . . . . . . . . . . . . . . . . . 143
B.4. 03 to 04 . . . . . . . . . . . . . . . . . . . . . . . . 143
B.5. 04 to 05 . . . . . . . . . . . . . . . . . . . . . . . . 144
B.6. 05 to 06 . . . . . . . . . . . . . . . . . . . . . . . . 144
B.7. 06 to 07 . . . . . . . . . . . . . . . . . . . . . . . . 144
B.8. 07 to 08 . . . . . . . . . . . . . . . . . . . . . . . . 144
B.9. 08 to 09 . . . . . . . . . . . . . . . . . . . . . . . . 145
B.10. 09 to 10 . . . . . . . . . . . . . . . . . . . . . . . . 145
B.11. 10 to 11 . . . . . . . . . . . . . . . . . . . . . . . . 145
B.12. 11 to 12 . . . . . . . . . . . . . . . . . . . . . . . . 145
B.13. 12 to 13 . . . . . . . . . . . . . . . . . . . . . . . . 145
B.14. 13 to 14 . . . . . . . . . . . . . . . . . . . . . . . . 146
B.15. 14 to 15 . . . . . . . . . . . . . . . . . . . . . . . . 146
B.16. 15 to 16 . . . . . . . . . . . . . . . . . . . . . . . . 146
B.17. 16 to 17 . . . . . . . . . . . . . . . . . . . . . . . . 146
B.18. 17 to 18 . . . . . . . . . . . . . . . . . . . . . . . . 146
B.19. 18 to 19 . . . . . . . . . . . . . . . . . . . . . . . . 147
B.20. 19 to 20 . . . . . . . . . . . . . . . . . . . . . . . . 147
B.21. 20 to 21 . . . . . . . . . . . . . . . . . . . . . . . . 148
B.22. 21 to 22 . . . . . . . . . . . . . . . . . . . . . . . . 148
B.23. 22 to 23 . . . . . . . . . . . . . . . . . . . . . . . . 148
B.24. 23 to 24 . . . . . . . . . . . . . . . . . . . . . . . . 148
B.25. 24 to 25 . . . . . . . . . . . . . . . . . . . . . . . . 149
B.26. 25 to 26 . . . . . . . . . . . . . . . . . . . . . . . . 149
B.27. 26 to 27 . . . . . . . . . . . . . . . . . . . . . . . . 149
B.28. 27 to 28 . . . . . . . . . . . . . . . . . . . . . . . . 149
B.29. 28 to 29 . . . . . . . . . . . . . . . . . . . . . . . . 149
B.30. 29 to 30 . . . . . . . . . . . . . . . . . . . . . . . . 149
B.31. 30 to 31 . . . . . . . . . . . . . . . . . . . . . . . . 150
B.32. 31 to 32 . . . . . . . . . . . . . . . . . . . . . . . . 150
B.33. 32 to 33 . . . . . . . . . . . . . . . . . . . . . . . . 150
B.34. 33 to 34 . . . . . . . . . . . . . . . . . . . . . . . . 150
B.35. 34 to 35 . . . . . . . . . . . . . . . . . . . . . . . . 151
B.36. 35 to 36 . . . . . . . . . . . . . . . . . . . . . . . . 151
B.37. 36 to 38 . . . . . . . . . . . . . . . . . . . . . . . . 151
B.38. 38 to 39 . . . . . . . . . . . . . . . . . . . . . . . . 151
B.39. 39 to 40 . . . . . . . . . . . . . . . . . . . . . . . . 151
Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 152
Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 152
1. Introduction 1. Introduction
This document presents seven YANG 1.1 [RFC7950] modules. Three This document presents three IETF-defined YANG modules [RFC7950] and
"IETF" modules and four "IANA" modules. a script used to create four supporting IANA modules.
The three IETF modules are ietf-ssh-common (Section 2), ietf-ssh- The three IETF modules are ietf-ssh-common (Section 2), ietf-ssh-
client (Section 3), and ietf-ssh-server (Section 4). The "ietf-ssh- client (Section 3), and ietf-ssh-server (Section 4). The "ietf-ssh-
client" and "ietf-ssh-server" modules are the primary productions of client" and "ietf-ssh-server" modules are the primary productions of
this work, supporting the configuration and monitoring of SSH clients this work, supporting the configuration and monitoring of SSH clients
and servers. and servers.
The groupings defined in this document are expected to be used in The groupings defined in this document are expected to be used in
conjunction with the groupings defined in an underlying transport- conjunction with the groupings defined in an underlying transport-
level module, such as the groupings defined in level module, such as the groupings defined in [RFC9643]. The
[I-D.ietf-netconf-tcp-client-server]. The transport-level data model transport-level data model enables the configuration of transport-
enables the configuration of transport-level values such as a remote level values, such as a remote address, a remote port, a local
address, a remote port, a local address, and a local port. address, and a local port.
The four IANA modules are: iana-ssh-encryption-algs (Appendix A.1), The four IANA modules are: iana-ssh-encryption-algs, iana-ssh-key-
iana-ssh-key-exchange-algs (Appendix A.4), iana-ssh-mac-algs exchange-algs, iana-ssh-mac-algs, and iana-ssh-public-key-algs.
(Appendix A.2), and iana-ssh-public-key-algs (Appendix A.3). These These modules each define YANG enumerations providing support for an
modules each define YANG enumerations providing support for an IANA- IANA-maintained algorithm registry.
maintained algorithm registry.
This document assumes that the four IANA modules exist, and presents This document assumes that the four IANA modules exist and presents a
a script in Appendix A that IANA may use to generate the YANG script in Appendix A that IANA may use to generate those YANG
modules. This document does not publish initial versions of these modules. This document does not publish the initial versions of
four modules. IANA publishes these modules. these four modules. IANA publishes these modules.
1.1. Regarding the IETF Modules 1.1. Regarding the Three IETF Modules
The three IETF modules define features and groupings to model The three IETF modules define features and groupings to model
"generic" SSH clients and SSH servers, where "generic" should be "generic" SSH clients and SSH servers, where "generic" should be
interpreted as "least common denominator" rather than "complete." interpreted as "least common denominator" rather than "complete."
Basic SSH protocol ([RFC4252], [RFC4253], and [RFC4254]) support is Support for the basic SSH protocol [RFC4252] [RFC4253] [RFC4254] is
afforded by these modules, leaving configuration of advance features afforded by these modules, leaving configuration of advanced features
(e.g., multiple channels) to augmentations made by consuming modules. (e.g., multiple channels) to augmentations made by consuming modules.
It is intended that the YANG groupings will be used by applications It is intended that the YANG groupings will be used by applications
needing to configure SSH client and server protocol stacks. For needing to configure SSH client and server protocol stacks. For
instance, these groupings are used to help define the data model for instance, these groupings are used to help define the data models in
NETCONF over SSH [RFC6242] based clients and servers in [NETCONF-CLIENT-SERVER], for clients and servers using the Network
[I-D.ietf-netconf-netconf-client-server]. Configuration Protocol (NETCONF) over SSH [RFC6242].
The ietf-ssh-client and ietf-ssh-server YANG modules each define one The "ietf-ssh-client" and "ietf-ssh-server" YANG modules each define
grouping, which is focused on just SSH-specific configuration, and one grouping, which is focused on just SSH-specific configuration,
specifically avoids any transport-level configuration, such as what and specifically avoid any transport-level configuration, such as
ports to listen on or connect to. This affords applications the what ports to listen on or connect to. This affords applications the
opportunity to define their own strategy for how the underlying TCP opportunity to define their own strategy for how the underlying TCP
connection is established. For instance, applications supporting connection is established. For instance, applications supporting
NETCONF Call Home [RFC8071] could use the "ssh-server-grouping" NETCONF Call Home [RFC8071] could use the "ssh-server-grouping"
grouping for the SSH parts it provides, while adding data nodes for grouping for the SSH parts it provides while adding data nodes for
the TCP-level call-home configuration. the TCP-level call-home configuration.
The modules defined in this document optionally support [RFC6187] The modules defined in this document optionally support [RFC6187],
enabling X.509v3 certificate based host keys and public keys. which describes enabling host keys and public keys based on X.509v3
certificates.
1.2. Relation to other RFCs 1.2. Relation to Other RFCs
This document presents one or more YANG modules [RFC7950] that are This document presents three YANG modules [RFC7950] that are part of
part of a collection of RFCs that work together to, ultimately, a collection of RFCs that work together to ultimately support the
support the configuration of both the clients and servers of both the configuration of both the clients and servers of both the NETCONF
NETCONF [RFC6241] and RESTCONF [RFC8040] protocols. [RFC6241] and RESTCONF [RFC8040] protocols.
The dependency relationship between the primary YANG groupings The dependency relationship between the primary YANG groupings
defined in the various RFCs is presented in the below diagram. In defined in the various RFCs is presented in the below diagram. In
some cases, a draft may define secondary groupings that introduce some cases, a document may define secondary groupings that introduce
dependencies not illustrated in the diagram. The labels in the dependencies not illustrated in the diagram. The labels in the
diagram are a shorthand name for the defining RFC. The citation diagram are shorthand names for the defining RFCs. The citation
reference for shorthand name is provided below the diagram. references for shorthand names are provided below the diagram.
Please note that the arrows in the diagram point from referencer to Please note that the arrows in the diagram point from referencer to
referenced. For example, the "crypto-types" RFC does not have any referenced. For example, the "crypto-types" RFC does not have any
dependencies, whilst the "keystore" RFC depends on the "crypto-types" dependencies, whilst the "keystore" RFC depends on the "crypto-types"
RFC. RFC.
crypto-types crypto-types
^ ^ ^ ^
/ \ / \
/ \ / \
skipping to change at page 8, line 5 skipping to change at line 196
| | | | | ^ | | | | | ^
| | | +-----+ +---------+ | | | | +-----+ +---------+ |
| | | | | | | | | | | |
| +-----------|--------|--------------+ | | | +-----------|--------|--------------+ | |
| | | | | | | | | | | |
+-----------+ | | | | | +-----------+ | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
netconf-client-server restconf-client-server netconf-client-server restconf-client-server
+======================+===========================================+ +========================+==========================+
|Label in Diagram | Originating RFC | | Label in Diagram | Reference |
+======================+===========================================+ +========================+==========================+
|crypto-types | [I-D.ietf-netconf-crypto-types] | | crypto-types | [RFC9640] |
+----------------------+-------------------------------------------+ +------------------------+--------------------------+
|truststore | [I-D.ietf-netconf-trust-anchors] | | truststore | [RFC9641] |
+----------------------+-------------------------------------------+ +------------------------+--------------------------+
|keystore | [I-D.ietf-netconf-keystore] | | keystore | [RFC9642] |
+----------------------+-------------------------------------------+ +------------------------+--------------------------+
|tcp-client-server | [I-D.ietf-netconf-tcp-client-server] | | tcp-client-server | [RFC9643] |
+----------------------+-------------------------------------------+ +------------------------+--------------------------+
|ssh-client-server | [I-D.ietf-netconf-ssh-client-server] | | ssh-client-server | RFC9644 |
+----------------------+-------------------------------------------+ +------------------------+--------------------------+
|tls-client-server | [I-D.ietf-netconf-tls-client-server] | | tls-client-server | [RFC9645] |
+----------------------+-------------------------------------------+ +------------------------+--------------------------+
|http-client-server | [I-D.ietf-netconf-http-client-server] | | http-client-server | [HTTP-CLIENT-SERVER] |
+----------------------+-------------------------------------------+ +------------------------+--------------------------+
|netconf-client-server | [I-D.ietf-netconf-netconf-client-server] | | netconf-client-server | [NETCONF-CLIENT-SERVER] |
+----------------------+-------------------------------------------+ +------------------------+--------------------------+
|restconf-client-server| [I-D.ietf-netconf-restconf-client-server] | | restconf-client-server | [RESTCONF-CLIENT-SERVER] |
+----------------------+-------------------------------------------+ +------------------------+--------------------------+
Table 1: Label in Diagram to RFC Mapping Table 1: Label in Diagram to RFC Mapping
1.3. Specification Language 1.3. Specification Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP "OPTIONAL" in this document are to be interpreted as described in
14 [RFC2119] [RFC8174] when, and only when, they appear in all BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here. capitals, as shown here.
1.4. Adherence to the NMDA 1.4. Adherence to the NMDA
This document is compliant with the Network Management Datastore This document is compliant with the Network Management Datastore
Architecture (NMDA) [RFC8342]. For instance, as described in Architecture (NMDA) [RFC8342]. For instance, as described in
[I-D.ietf-netconf-trust-anchors] and [I-D.ietf-netconf-keystore], [RFC9641] and [RFC9642], trust anchors and keys installed during
trust anchors and keys installed during manufacturing are expected to manufacturing are expected to appear in <operational> (Section 5.3 of
appear in <operational> (Section 5.3 of [RFC8342]), and <system> [RFC8342]) and <system> [SYSTEM-CONFIG] if implemented.
[I-D.ietf-netmod-system-config], if implemented.
1.5. Conventions 1.5. Conventions
Various examples in this document use "BASE64VALUE=" as a placeholder Various examples in this document use "BASE64VALUE=" as a placeholder
value for binary data that has been base64 encoded (per Section 9.8 value for binary data that has been base64 encoded (per Section 9.8
of [RFC7950]). This placeholder value is used because real base64 of [RFC7950]). This placeholder value is used because real
encoded structures are often many lines long and hence distracting to base64-encoded structures are often many lines long and hence
the example being presented. distracting to the example being presented.
Various examples in this document use the XML [W3C.REC-xml-20081126]
encoding. Other encodings, such as JSON [RFC8259], could
alternatively be used.
Various examples in this document contain long lines that may be
folded, as described in [RFC8792].
2. The "ietf-ssh-common" Module 2. The "ietf-ssh-common" Module
The SSH common model presented in this section contains features and The SSH common model presented in this section is common to both SSH
groupings common to both SSH clients and SSH servers. The clients and SSH servers. The "transport-params-grouping" grouping
"transport-params-grouping" grouping can be used to configure the can be used to configure the list of SSH transport algorithms
list of SSH transport algorithms permitted by the SSH client or SSH permitted by the SSH client or SSH server. The lists of permitted
server. The lists of permitted algorithms are in decreasing order of algorithms are in decreasing order of usage preference. The
usage preference. The algorithm that appears first in the client algorithm that appears first in the client list that also appears in
list that also appears in the server list is the one that is used for the server list is the one that is used for the SSH transport layer
the SSH transport layer connection. The ability to restrict the connection. The ability to restrict the algorithms allowed is
algorithms allowed is provided in this grouping for SSH clients and provided in this grouping for SSH clients and SSH servers that are
SSH servers that are capable of doing so and may serve to make SSH capable of doing so and may serve to make SSH clients and SSH servers
clients and SSH servers compliant with security policies. compliant with security policies.
2.1. Data Model Overview 2.1. Data Model Overview
This section provides an overview of the "ietf-ssh-common" module in This section provides an overview of the "ietf-ssh-common" module in
terms of its features, identities, and groupings. terms of its features, identities, groupings, and protocol-accessible
nodes.
2.1.1. Features 2.1.1. Features
The following diagram lists all the "feature" statements defined in The following diagram lists all the "feature" statements defined in
the "ietf-ssh-common" module: the "ietf-ssh-common" module:
Features: Features:
+-- ssh-x509-certs +-- ssh-x509-certs
+-- transport-params +-- transport-params
+-- asymmetric-key-pair-generation +-- asymmetric-key-pair-generation
skipping to change at page 10, line 18 skipping to change at line 314
+-- key-exchange +-- key-exchange
| +-- key-exchange-alg* ssh-key-exchange-algorithm | +-- key-exchange-alg* ssh-key-exchange-algorithm
+-- encryption +-- encryption
| +-- encryption-alg* ssh-encryption-algorithm | +-- encryption-alg* ssh-encryption-algorithm
+-- mac +-- mac
+-- mac-alg* ssh-mac-algorithm +-- mac-alg* ssh-mac-algorithm
Comments: Comments:
* This grouping is used by both the "ssh-client-grouping" and the * This grouping is used by both the "ssh-client-grouping" and the
"ssh-server-grouping" groupings defined in Section 3.1.2.1 and "ssh-server-grouping" groupings defined in Sections 3.1.2.1 and
Section 4.1.2.1, respectively. 4.1.2.1, respectively.
* This grouping enables client and server configurations to specify * This grouping enables client and server configurations to specify
the algorithms that are to be used when establishing SSH sessions. the algorithms that are to be used when establishing SSH sessions.
* Each list is "ordered-by user". * Each list is "ordered-by user".
2.1.3. Protocol-accessible Nodes 2.1.3. Protocol-Accessible Nodes
The following tree diagram [RFC8340] lists all the protocol- The following tree diagram [RFC8340] lists all the protocol-
accessible nodes defined in the "ietf-ssh-common" module, without accessible nodes defined in the "ietf-ssh-common" module without
expanding the "grouping" statements: expanding the "grouping" statements:
module: ietf-ssh-common module: ietf-ssh-common
+--ro supported-algorithms {algorithm-discovery}? +--ro supported-algorithms {algorithm-discovery}?
+--ro public-key-algorithms +--ro public-key-algorithms
| +--ro supported-algorithm* ssh-public-key-algorithm | +--ro supported-algorithm* ssh-public-key-algorithm
+--ro encryption-algorithms +--ro encryption-algorithms
| +--ro supported-algorithm* ssh-encryption-algorithm | +--ro supported-algorithm* ssh-encryption-algorithm
+--ro key-exchange-algorithms +--ro key-exchange-algorithms
| +--ro supported-algorithm* ssh-key-exchange-algorithm | +--ro supported-algorithm* ssh-key-exchange-algorithm
skipping to change at page 11, line 46 skipping to change at line 369
+--ro location? +--ro location?
instance-identifier instance-identifier
Comments: Comments:
* Protocol-accessible nodes are those nodes that are accessible when * Protocol-accessible nodes are those nodes that are accessible when
the module is "implemented", as described in Section 5.6.5 of the module is "implemented", as described in Section 5.6.5 of
[RFC7950]. [RFC7950].
* The protocol-accessible nodes for the "ietf-ssh-common" module are * The protocol-accessible nodes for the "ietf-ssh-common" module are
limited to "supported-algorithms" container, which is constrained limited to the "supported-algorithms" container, which is
by the "algorithm-discovery" feature, and the RPC "generate- constrained by the "algorithm-discovery" feature, and the
asymmetric-key-pair", which is constrained by the "asymmetric-key- "generate-asymmetric-key-pair" RPC, which is constrained by the
pair-generation" feature. "asymmetric-key-pair-generation" feature.
* The "encrypted-by-grouping" grouping is discussed in * The "encrypted-by-grouping" grouping is discussed in
Section 2.1.3.1 of [I-D.ietf-netconf-keystore]. Section 2.1.3.1 of [RFC9642].
* The "asymmetric-key-pair-grouping" grouping is discussed in * The "asymmetric-key-pair-grouping" grouping is discussed in
Section 2.1.4.6 of [I-D.ietf-netconf-crypto-types]. Section 2.1.4.6 of [RFC9640].
2.2. Example Usage 2.2. Example Usage
The following example illustrates the "transport-params-grouping' The following example illustrates the "transport-params-grouping'
grouping when populated with some data. grouping when populated with some data.
=============== NOTE: '\' line wrapping per RFC 8792 ================ =============== NOTE: '\' line wrapping per RFC 8792 ================
<!-- The outermost element below doesn't exist in the data model. --> <!-- The outermost element below doesn't exist in the data model. -->
<!-- It simulates if the "grouping" were a "container" instead. --> <!-- It simulates if the "grouping" were a "container" instead. -->
skipping to change at page 14, line 40 skipping to change at line 498
n:public-key-format> n:public-key-format>
<sshcmn:public-key>BASE64VALUE=</sshcmn:public-key> <sshcmn:public-key>BASE64VALUE=</sshcmn:public-key>
<sshcmn:private-key-format>ct:ec-private-key-format</sshcmn:privat\ <sshcmn:private-key-format>ct:ec-private-key-format</sshcmn:privat\
e-key-format> e-key-format>
<sshcmn:cleartext-private-key>BASE64VALUE=</sshcmn:cleartext-priva\ <sshcmn:cleartext-private-key>BASE64VALUE=</sshcmn:cleartext-priva\
te-key> te-key>
</rpc-reply> </rpc-reply>
2.3. YANG Module 2.3. YANG Module
This YANG module has normative references to [RFC4253], [RFC4344], This YANG module has normative references to [RFC4250], [RFC4253],
[RFC4419], [RFC5656], [RFC6187], [RFC6668], and [FIPS_186-6]. [RFC6187], and [FIPS_186-5].
<CODE BEGINS> file "ietf-ssh-common@2024-03-16.yang" <CODE BEGINS> file "ietf-ssh-common@2024-03-16.yang"
module ietf-ssh-common { module ietf-ssh-common {
yang-version 1.1; yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-ssh-common"; namespace "urn:ietf:params:xml:ns:yang:ietf-ssh-common";
prefix sshcmn; prefix sshcmn;
import ietf-crypto-types {
prefix ct;
reference
"RFC 9640: YANG Data Types and Groupings for Cryptography";
}
import ietf-keystore {
prefix ks;
reference
"RFC 9642: A YANG Data Model for a Keystore";
}
import iana-ssh-encryption-algs { import iana-ssh-encryption-algs {
prefix sshea; prefix sshea;
reference reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; "RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
} }
import iana-ssh-key-exchange-algs { import iana-ssh-key-exchange-algs {
prefix sshkea; prefix sshkea;
reference reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; "RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
} }
import iana-ssh-mac-algs { import iana-ssh-mac-algs {
prefix sshma; prefix sshma;
reference reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; "RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
} }
import iana-ssh-public-key-algs { import iana-ssh-public-key-algs {
prefix sshpka; prefix sshpka;
reference reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; "RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
}
import ietf-crypto-types {
prefix ct;
reference
"RFC AAAA: YANG Data Types and Groupings for Cryptography";
}
import ietf-keystore {
prefix ks;
reference
"RFC CCCC: A YANG Data Model for a Keystore";
} }
organization organization
"IETF NETCONF (Network Configuration) Working Group"; "IETF NETCONF (Network Configuration) Working Group";
contact contact
"WG Web: https://datatracker.ietf.org/wg/netconf "WG Web: https://datatracker.ietf.org/wg/netconf
WG List: NETCONF WG list <mailto:netconf@ietf.org> WG List: NETCONF WG list <mailto:netconf@ietf.org>
Author: Kent Watsen <mailto:kent+ietf@watsen.net> Author: Kent Watsen <mailto:kent+ietf@watsen.net>
Author: Gary Wu <mailto:garywu@cisco.com>"; Author: Gary Wu <mailto:garywu@cisco.com>";
description description
"This module defines a common features and groupings for "This module defines common features and groupings for
Secure Shell (SSH). Secure Shell (SSH).
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
are to be interpreted as described in BCP 14 (RFC 2119)
(RFC 8174) when, and only when, they appear in all
capitals, as shown here.
Copyright (c) 2024 IETF Trust and the persons identified Copyright (c) 2024 IETF Trust and the persons identified
as authors of the code. All rights reserved. as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Revised subject to the license terms contained in, the Revised
BSD License set forth in Section 4.c of the IETF Trust's BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents Legal Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info). (https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC EEEE This version of this YANG module is part of RFC 9644
(https://www.rfc-editor.org/info/rfcEEEE); see the RFC (https://www.rfc-editor.org/info/rfc9644); see the RFC
itself for full legal notices. itself for full legal notices.";
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
are to be interpreted as described in BCP 14 (RFC 2119)
(RFC 8174) when, and only when, they appear in all
capitals, as shown here.";
revision 2024-03-16 { revision 2024-03-16 {
description description
"Initial version"; "Initial version.";
reference reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; "RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
} }
// Features // Features
feature ssh-x509-certs { feature ssh-x509-certs {
description description
"X.509v3 certificates are supported for SSH."; "X.509v3 certificates are supported for SSH.";
reference reference
"RFC 6187: X.509v3 Certificates for Secure Shell "RFC 6187: X.509v3 Certificates for Secure Shell
Authentication"; Authentication";
skipping to change at page 17, line 4 skipping to change at line 604
feature transport-params { feature transport-params {
description description
"SSH transport layer parameters are configurable."; "SSH transport layer parameters are configurable.";
} }
feature asymmetric-key-pair-generation { feature asymmetric-key-pair-generation {
description description
"Indicates that the server implements the "Indicates that the server implements the
'generate-asymmetric-key-pair' RPC."; 'generate-asymmetric-key-pair' RPC.";
} }
feature algorithm-discovery { feature algorithm-discovery {
description description
"Indicates that the server implements the "Indicates that the server implements the
'supported-algorithms' container."; 'supported-algorithms' container.";
} }
// Typedefs // Typedefs
typedef ssh-public-key-algorithm { typedef ssh-public-key-algorithm {
type union { type union {
type sshpka:ssh-public-key-algorithm; type sshpka:ssh-public-key-algorithm;
type string { type string {
length "1..64" { length "1..64" {
description description
"Non IANA-maintained algorithms must include the "Non-IANA-maintained algorithms must include the
'at-sign' (@) in them, per Section 4.6.1 of RFC at sign (@) in them, per Section 4.6.1 of RFC
4250."; 4250.";
reference reference
"RFC 4250: SSH Protocol Assigned Numbers"; "RFC 4250: The Secure Shell (SSH) Protocol Assigned
Numbers";
} }
pattern ".*@.*" { pattern '.*@.*' {
description description
"Non IANA-maintained algorithms must include the "Non-IANA-maintained algorithms must include the
'at-sign' (@) in them, per Section 4.6.1 of RFC at sign (@) in them, per Section 4.6.1 of RFC
4250."; 4250.";
reference reference
"RFC 4250: SSH Protocol Assigned Numbers"; "RFC 4250: The Secure Shell (SSH) Protocol Assigned
Numbers";
} }
} }
} }
description description
"A type that enables the public key algorithm to be "A type that enables the public key algorithm to be
either an IANA-maintained public key algorithm in either an IANA-maintained public key algorithm in
the 'iana-ssh-public-key-algs' YANG module (RFC EEEE), the 'iana-ssh-public-key-algs' YANG module (RFC 9644)
or a locally-defined algorithm, per Section 4.6.1 or a locally defined algorithm, per Section 4.6.1
of RFC 4250."; of RFC 4250.";
reference reference
"RFC 4250: SSH Protocol Assigned Numbers "RFC 4250: The Secure Shell (SSH) Protocol Assigned Numbers
RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
} }
typedef ssh-key-exchange-algorithm { typedef ssh-key-exchange-algorithm {
type union { type union {
type sshkea:ssh-key-exchange-algorithm; type sshkea:ssh-key-exchange-algorithm;
type string { type string {
length "1..64" { length "1..64" {
description description
"Non IANA-maintained algorithms must include the "Non-IANA-maintained algorithms must include the
'at-sign' (@) in them, per Section 4.6.1 of RFC at sign (@) in them, per Section 4.6.1 of RFC 4250.";
4250.";
reference reference
"RFC 4250: SSH Protocol Assigned Numbers"; "RFC 4250: The Secure Shell (SSH) Protocol Assigned
Numbers";
} }
pattern ".*@.*" { pattern '.*@.*' {
description description
"Non IANA-maintained algorithms must include the "Non-IANA-maintained algorithms must include the
'at-sign' (@) in them, per Section 4.6.1 of RFC at sign (@) in them, per Section 4.6.1 of RFC 4250.";
4250.";
reference reference
"RFC 4250: SSH Protocol Assigned Numbers"; "RFC 4250: The Secure Shell (SSH) Protocol Assigned
Numbers";
} }
} }
} }
description description
"A type that enables the key exchange algorithm to be "A type that enables the key exchange algorithm to be
either an IANA-maintained key exchange algorithm in either an IANA-maintained key exchange algorithm in
the 'iana-ssh-key-exchange-algs' YANG module (RFC EEEE), the 'iana-ssh-key-exchange-algs' YANG module (RFC 9644)
or a locally-defined algorithm, per Section 4.6.1 or a locally defined algorithm, per Section 4.6.1
of RFC 4250."; of RFC 4250.";
reference reference
"RFC 4250: SSH Protocol Assigned Numbers "RFC 4250: The Secure Shell (SSH) Protocol Assigned Numbers
RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
} }
typedef ssh-encryption-algorithm { typedef ssh-encryption-algorithm {
type union { type union {
type sshea:ssh-encryption-algorithm; type sshea:ssh-encryption-algorithm;
type string { type string {
length "1..64" { length "1..64" {
description description
"Non IANA-maintained algorithms must include the "Non-IANA-maintained algorithms must include the
'at-sign' (@) in them, per Section 4.6.1 of RFC at sign (@) in them, per Section 4.6.1 of RFC
4250."; 4250.";
reference reference
"RFC 4250: SSH Protocol Assigned Numbers"; "RFC 4250: The Secure Shell (SSH) Protocol Assigned
Numbers";
} }
pattern ".*@.*" { pattern '.*@.*' {
description description
"Non IANA-maintained algorithms must include the "Non-IANA-maintained algorithms must include the
'at-sign' (@) in them, per Section 4.6.1 of RFC at sign (@) in them, per Section 4.6.1 of RFC
4250."; 4250.";
reference reference
"RFC 4250: SSH Protocol Assigned Numbers"; "RFC 4250: The Secure Shell (SSH) Protocol Assigned
Numbers";
} }
} }
} }
description description
"A type that enables the encryption algorithm to be "A type that enables the encryption algorithm to be
either an IANA-maintained encryption algorithm in either an IANA-maintained encryption algorithm in
the 'iana-ssh-encryption-algs' YANG module (RFC EEEE), the 'iana-ssh-encryption-algs' YANG module (RFC 9644)
or a locally-defined algorithm, per Section 4.6.1 or a locally defined algorithm, per Section 4.6.1
of RFC 4250."; of RFC 4250.";
reference reference
"RFC 4250: SSH Protocol Assigned Numbers "RFC 4250: The Secure Shell (SSH) Protocol Assigned Numbers
RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
} }
typedef ssh-mac-algorithm { typedef ssh-mac-algorithm {
type union { type union {
type sshma:ssh-mac-algorithm; type sshma:ssh-mac-algorithm;
type string { type string {
length "1..64" { length "1..64" {
description description
"Non IANA-maintained algorithms must include the "Non-IANA-maintained algorithms must include the
'at-sign' (@) in them, per Section 4.6.1 of RFC at sign (@) in them, per Section 4.6.1 of RFC
4250."; 4250.";
reference reference
"RFC 4250: SSH Protocol Assigned Numbers"; "RFC 4250: The Secure Shell (SSH) Protocol Assigned
Numbers";
} }
pattern ".*@.*" { pattern '.*@.*' {
description description
"Non IANA-maintained algorithms must include the "Non-IANA-maintained algorithms must include the
'at-sign' (@) in them, per Section 4.6.1 of RFC at sign (@) in them, per Section 4.6.1 of RFC
4250."; 4250.";
reference reference
"RFC 4250: SSH Protocol Assigned Numbers"; "RFC 4250: The Secure Shell (SSH) Protocol Assigned
Numbers";
} }
} }
} }
description description
"A type that enables the MAC algorithm to be "A type that enables the message authentication code (MAC)
either an IANA-maintained MAC algorithm in algorithm to be either an IANA-maintained MAC algorithm
the 'iana-ssh-mac-algs' YANG module (RFC EEEE), in the 'iana-ssh-mac-algs' YANG module (RFC 9644)
or a locally-defined algorithm, per Section 4.6.1 or a locally defined algorithm, per Section 4.6.1
of RFC 4250."; of RFC 4250.";
reference reference
"RFC 4250: SSH Protocol Assigned Numbers "RFC 4250: The Secure Shell (SSH) Protocol Assigned Numbers
RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
} }
// Groupings // Groupings
grouping transport-params-grouping { grouping transport-params-grouping {
description description
"A reusable grouping for SSH transport parameters."; "A reusable grouping for SSH transport parameters.";
reference reference
"RFC 4253: The Secure Shell (SSH) Transport Layer Protocol"; "RFC 4253: The Secure Shell (SSH) Transport Layer Protocol";
container host-key { container host-key {
description description
"Parameters regarding host key."; "Parameters regarding host key.";
leaf-list host-key-alg { leaf-list host-key-alg {
type ssh-public-key-algorithm; type ssh-public-key-algorithm;
ordered-by user; ordered-by user;
description description
"Acceptable host key algorithms in order of decreasing "Acceptable host key algorithms in order of decreasing
preference. preference.
If this leaf-list is not configured (has zero elements) If this leaf-list is not configured (has zero
the acceptable host key algorithms are implementation- elements), the acceptable host key algorithms are
defined."; implementation-defined.";
reference reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; "RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
} }
} }
container key-exchange { container key-exchange {
description description
"Parameters regarding key exchange."; "Parameters regarding key exchange.";
leaf-list key-exchange-alg { leaf-list key-exchange-alg {
type ssh-key-exchange-algorithm; type ssh-key-exchange-algorithm;
ordered-by user; ordered-by user;
description description
"Acceptable key exchange algorithms in order of decreasing "Acceptable key exchange algorithms in order of decreasing
preference. preference.
If this leaf-list is not configured (has zero elements) If this leaf-list is not configured (has zero
the acceptable key exchange algorithms are implementation elements), the acceptable key exchange algorithms are
defined."; implementation-defined.";
} }
} }
container encryption { container encryption {
description description
"Parameters regarding encryption."; "Parameters regarding encryption.";
leaf-list encryption-alg { leaf-list encryption-alg {
type ssh-encryption-algorithm; type ssh-encryption-algorithm;
ordered-by user; ordered-by user;
description description
"Acceptable encryption algorithms in order of decreasing "Acceptable encryption algorithms in order of decreasing
preference. preference.
If this leaf-list is not configured (has zero elements) If this leaf-list is not configured (has zero
the acceptable encryption algorithms are implementation elements), the acceptable encryption algorithms are
defined."; implementation-defined.";
} }
} }
container mac { container mac {
description description
"Parameters regarding message authentication code (MAC)."; "Parameters regarding message authentication code (MAC).";
leaf-list mac-alg { leaf-list mac-alg {
type ssh-mac-algorithm; type ssh-mac-algorithm;
ordered-by user; ordered-by user;
description description
"Acceptable MAC algorithms in order of decreasing "Acceptable MAC algorithms in order of decreasing
preference. preference.
If this leaf-list is not configured (has zero elements) If this leaf-list is not configured (has zero
the acceptable MAC algorithms are implementation- elements), the acceptable MAC algorithms are
defined."; implementation-defined.";
} }
} }
} }
// Protocol-accessible Nodes // Protocol-accessible Nodes
container supported-algorithms { container supported-algorithms {
if-feature "algorithm-discovery"; if-feature "algorithm-discovery";
config false; config false;
description description
skipping to change at page 22, line 43 skipping to change at line 890
type ssh-public-key-algorithm; type ssh-public-key-algorithm;
mandatory true; mandatory true;
description description
"The algorithm to be used when generating the key."; "The algorithm to be used when generating the key.";
} }
leaf num-bits { leaf num-bits {
type uint16; type uint16;
description description
"Specifies the number of bits in the key to create. "Specifies the number of bits in the key to create.
For RSA keys, the minimum size is 1024 bits and For RSA keys, the minimum size is 1024 bits and
the default is 3072 bits. Generally, 3072 bits is the default is 3072 bits. Generally, 3072 bits is
considered sufficient. DSA keys must be exactly 1024 considered sufficient. DSA keys must be exactly 1024
bits as specified by FIPS 186-6. For ECDSA keys, the bits, as specified by FIPS 186-5. For Elliptic Curve
Digital Signature Algorithm (ECDSA) keys, the
'num-bits' value determines the key length by selecting 'num-bits' value determines the key length by selecting
from one of three elliptic curve sizes: 256, 384 or from one of three elliptic curve sizes: 256, 384, or
521 bits. Attempting to use bit lengths other than 521 bits. Attempting to use bit lengths other than
these three values for ECDSA keys will fail. ECDSA-SK, these three values for ECDSA keys will fail. ECDSA-SK,
Ed25519 and Ed25519-SK keys have a fixed length and Ed25519, and Ed25519-SK keys have a fixed length, and
thus the 'num-bits' value is not specified."; thus, the 'num-bits' value is not specified.";
reference reference
"FIPS 186-6: Digital Signature Standard (DSS)"; "FIPS 186-5: Digital Signature Standard (DSS)";
} }
container private-key-encoding { container private-key-encoding {
description description
"Indicates how the private key is to be encoded."; "Indicates how the private key is to be encoded.";
choice private-key-encoding { choice private-key-encoding {
mandatory true; mandatory true;
description description
"A choice amongst optional private key handling."; "A choice amongst optional private key handling.";
case cleartext { case cleartext {
if-feature "ct:cleartext-private-keys"; if-feature "ct:cleartext-private-keys";
skipping to change at page 23, line 28 skipping to change at line 923
type empty; type empty;
description description
"Indicates that the private key is to be returned "Indicates that the private key is to be returned
as a cleartext value."; as a cleartext value.";
} }
} }
case encrypted { case encrypted {
if-feature "ct:encrypted-private-keys"; if-feature "ct:encrypted-private-keys";
container encrypted { container encrypted {
description description
"Indicates that the private key is to be encrypted "Indicates that the private key is to be encrypted
using the specified symmetric or asymmetric key."; using the specified symmetric or asymmetric key.";
uses ks:encrypted-by-grouping; uses ks:encrypted-by-grouping;
} }
} }
case hidden { case hidden {
if-feature "ct:hidden-private-keys"; if-feature "ct:hidden-private-keys";
leaf hidden { leaf hidden {
type empty; type empty;
description description
"Indicates that the private key is to be hidden. "Indicates that the private key is to be hidden.
Unlike the 'cleartext' and 'encrypt' options, the Unlike the 'cleartext' and 'encrypt' options, the
key returned is a placeholder for an internally key returned is a placeholder for an internally
stored key. See the 'Support for Built-in Keys' stored key. See the 'Support for Built-in Keys'
section in RFC CCCC for information about hidden section in RFC 9642 for information about hidden
keys. keys.
It is expected that the server will instantiate It is expected that the server will instantiate
the hidden key in the same location where built-in the hidden key in the same location where built-in
keys are located. Rather than return the key, keys are located. Rather than returning the key,
just the key's location is returned in the output."; just the key's location is returned in the output.";
} }
} }
} }
} }
} }
output { output {
choice key-or-hidden { choice key-or-hidden {
case key { case key {
uses ct:asymmetric-key-pair-grouping; uses ct:asymmetric-key-pair-grouping;
} }
case hidden { case hidden {
leaf location { leaf location {
type instance-identifier; type instance-identifier;
skipping to change at page 24, line 28 skipping to change at line 971
} }
description description
"The output can be either a key (for cleartext and "The output can be either a key (for cleartext and
encrypted keys) or the location to where the key encrypted keys) or the location to where the key
was created (for hidden keys)."; was created (for hidden keys).";
} }
} }
} // end generate-asymmetric-key-pair } // end generate-asymmetric-key-pair
} }
<CODE ENDS> <CODE ENDS>
3. The "ietf-ssh-client" Module 3. The "ietf-ssh-client" Module
This section defines a YANG 1.1 [RFC7950] module called "ietf-ssh- This section defines a YANG 1.1 [RFC7950] module called "ietf-ssh-
client". A high-level overview of the module is provided in client". A high-level overview of the module is provided in
Section 3.1. Examples illustrating the module's use are provided in Section 3.1. Examples illustrating the module's use are provided in
Examples (Section 3.2). The YANG module itself is defined in Section 3.2 ("Example Usage"). The YANG module itself is defined in
Section 3.3. Section 3.3.
3.1. Data Model Overview 3.1. Data Model Overview
This section provides an overview of the "ietf-ssh-client" module in This section provides an overview of the "ietf-ssh-client" module in
terms of its features and groupings. terms of its features and groupings.
3.1.1. Features 3.1.1. Features
The following diagram lists all the "feature" statements defined in The following diagram lists all the "feature" statements defined in
skipping to change at page 26, line 51 skipping to change at line 1063
"feature" statement. "feature" statement.
* The "transport-params" node, which must be enabled by a feature, * The "transport-params" node, which must be enabled by a feature,
configures parameters for the SSH sessions established by this configures parameters for the SSH sessions established by this
configuration. configuration.
* The "keepalives" node, which must be enabled by a feature, * The "keepalives" node, which must be enabled by a feature,
configures a "presence" container for testing the aliveness of the configures a "presence" container for testing the aliveness of the
SSH server. The aliveness-test occurs at the SSH protocol layer. SSH server. The aliveness-test occurs at the SSH protocol layer.
* For the referenced grouping statement(s): * For the referenced grouping statements:
- The "inline-or-keystore-asymmetric-key-grouping" grouping is - The "inline-or-keystore-asymmetric-key-grouping" grouping is
discussed in Section 2.1.3.4 of [I-D.ietf-netconf-keystore]. discussed in Section 2.1.3.4 of [RFC9642].
- The "inline-or-keystore-end-entity-cert-with-key-grouping" - The "inline-or-keystore-end-entity-cert-with-key-grouping"
grouping is discussed in Section 2.1.3.6 of grouping is discussed in Section 2.1.3.6 of [RFC9642].
[I-D.ietf-netconf-keystore].
- The "inline-or-truststore-public-keys-grouping" grouping is - The "inline-or-truststore-public-keys-grouping" grouping is
discussed in Section 2.1.3.4 of discussed in Section 2.1.3.4 of [RFC9641].
[I-D.ietf-netconf-trust-anchors].
- The "inline-or-truststore-certs-grouping" grouping is discussed - The "inline-or-truststore-certs-grouping" grouping is discussed
in Section 2.1.3.3 of [I-D.ietf-netconf-trust-anchors]. in Section 2.1.3.3 of [RFC9641].
- The "transport-params-grouping" grouping is discussed in - The "transport-params-grouping" grouping is discussed in
Section 2.1.2.1 in this document. Section 2.1.2.1 in this document.
3.1.3. Protocol-accessible Nodes 3.1.3. Protocol-Accessible Nodes
The "ietf-ssh-client" module defines only "grouping" statements that The "ietf-ssh-client" module defines only "grouping" statements that
are used by other modules to instantiate protocol-accessible nodes. are used by other modules to instantiate protocol-accessible nodes.
Thus this module, when implemented, does not itself define any Thus, this module, when implemented, does not itself define any
protocol-accessible nodes. protocol-accessible nodes.
3.2. Example Usage 3.2. Example Usage
This section presents two examples showing the "ssh-client-grouping" This section presents two examples showing the "ssh-client-grouping"
grouping populated with some data. These examples are effectively grouping populated with some data. These examples are effectively
the same except the first configures the client identity using a the same, except the first configures the client identity using an
inlined key while the second uses a key configured in a keystore. inlined key, while the second uses a key configured in a keystore.
Both examples are consistent with the examples presented in Both examples are consistent with the examples presented in
Section 2.2.1 of [I-D.ietf-netconf-trust-anchors] and Section 2.2.1 Section 2.2.1 of [RFC9641] and Section 2.2.1 of [RFC9642].
of [I-D.ietf-netconf-keystore].
The following configuration example uses inline-definitions for the The following configuration example uses inline-definitions for the
client identity and server authentication: client identity and server authentication:
=============== NOTE: '\' line wrapping per RFC 8792 ================ =============== NOTE: '\' line wrapping per RFC 8792 ================
<!-- The outermost element below doesn't exist in the data model. --> <!-- The outermost element below doesn't exist in the data model. -->
<!-- It simulates if the "grouping" were a "container" instead. --> <!-- It simulates if the "grouping" were a "container" instead. -->
<ssh-client <ssh-client
skipping to change at page 29, line 4 skipping to change at line 1162
<certificate> <certificate>
<name>My Application #1</name> <name>My Application #1</name>
<cert-data>BASE64VALUE=</cert-data> <cert-data>BASE64VALUE=</cert-data>
</certificate> </certificate>
<certificate> <certificate>
<name>My Application #2</name> <name>My Application #2</name>
<cert-data>BASE64VALUE=</cert-data> <cert-data>BASE64VALUE=</cert-data>
</certificate> </certificate>
</inline-definition> </inline-definition>
</ee-certs> </ee-certs>
</server-authentication> </server-authentication>
<keepalives> <keepalives>
<max-wait>30</max-wait> <max-wait>30</max-wait>
<max-attempts>3</max-attempts> <max-attempts>3</max-attempts>
</keepalives> </keepalives>
</ssh-client> </ssh-client>
The following configuration example uses central-keystore-references The following configuration example uses central-keystore-references
for the client identity and central-truststore-references for server for the client identity and central-truststore-references for server
authentication: from the keystore: authentication from the keystore:
=============== NOTE: '\' line wrapping per RFC 8792 ================ =============== NOTE: '\' line wrapping per RFC 8792 ================
<!-- The outermost element below doesn't exist in the data model. --> <!-- The outermost element below doesn't exist in the data model. -->
<!-- It simulates if the "grouping" were a "container" instead. --> <!-- It simulates if the "grouping" were a "container" instead. -->
<ssh-client <ssh-client
xmlns="urn:ietf:params:xml:ns:yang:ietf-ssh-client" xmlns="urn:ietf:params:xml:ns:yang:ietf-ssh-client"
xmlns:algs="urn:ietf:params:xml:ns:yang:ietf-ssh-common"> xmlns:algs="urn:ietf:params:xml:ns:yang:ietf-ssh-common">
skipping to change at page 31, line 8 skipping to change at line 1225
<keepalives> <keepalives>
<max-wait>30</max-wait> <max-wait>30</max-wait>
<max-attempts>3</max-attempts> <max-attempts>3</max-attempts>
</keepalives> </keepalives>
</ssh-client> </ssh-client>
3.3. YANG Module 3.3. YANG Module
This YANG module has normative references to [RFC4252], [RFC4254], This YANG module has normative references to [RFC4252], [RFC4254],
[RFC8341], [I-D.ietf-netconf-crypto-types], [RFC8341], [RFC9640], [RFC9641], and [RFC9642].
[I-D.ietf-netconf-trust-anchors], and [I-D.ietf-netconf-keystore].
<CODE BEGINS> file "ietf-ssh-client@2024-03-16.yang" <CODE BEGINS> file "ietf-ssh-client@2024-03-16.yang"
module ietf-ssh-client { module ietf-ssh-client {
yang-version 1.1; yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-ssh-client"; namespace "urn:ietf:params:xml:ns:yang:ietf-ssh-client";
prefix sshc; prefix sshc;
import ietf-netconf-acm { import ietf-netconf-acm {
prefix nacm; prefix nacm;
reference reference
"RFC 8341: Network Configuration Access Control Model"; "RFC 8341: Network Configuration Access Control Model";
} }
import ietf-crypto-types { import ietf-crypto-types {
prefix ct; prefix ct;
reference reference
"RFC AAAA: YANG Data Types and Groupings for Cryptography"; "RFC 9640: YANG Data Types and Groupings for Cryptography";
} }
import ietf-truststore { import ietf-truststore {
prefix ts; prefix ts;
reference reference
"RFC BBBB: A YANG Data Model for a Truststore"; "RFC 9641: A YANG Data Model for a Truststore";
} }
import ietf-keystore { import ietf-keystore {
prefix ks; prefix ks;
reference reference
"RFC CCCC: A YANG Data Model for a Keystore"; "RFC 9642: A YANG Data Model for a Keystore";
} }
import ietf-ssh-common { import ietf-ssh-common {
prefix sshcmn; prefix sshcmn;
reference reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; "RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
} }
organization organization
"IETF NETCONF (Network Configuration) Working Group"; "IETF NETCONF (Network Configuration) Working Group";
contact contact
"WG Web: https://datatracker.ietf.org/wg/netconf "WG Web: https://datatracker.ietf.org/wg/netconf
WG List: NETCONF WG list <mailto:netconf@ietf.org> WG List: NETCONF WG list <mailto:netconf@ietf.org>
Author: Kent Watsen <mailto:kent+ietf@watsen.net>"; Author: Kent Watsen <mailto:kent+ietf@watsen.net>";
description description
"This module defines a reusable grouping for SSH clients that "This module defines a reusable grouping for SSH clients that
can be used as a basis for specific SSH client instances. can be used as a basis for specific SSH client instances.
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
are to be interpreted as described in BCP 14 (RFC 2119)
(RFC 8174) when, and only when, they appear in all
capitals, as shown here.
Copyright (c) 2024 IETF Trust and the persons identified Copyright (c) 2024 IETF Trust and the persons identified
as authors of the code. All rights reserved. as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Revised subject to the license terms contained in, the Revised
BSD License set forth in Section 4.c of the IETF Trust's BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents Legal Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info). (https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC EEEE This version of this YANG module is part of RFC 9644
(https://www.rfc-editor.org/info/rfcEEEE); see the RFC (https://www.rfc-editor.org/info/rfc9644); see the RFC
itself for full legal notices. itself for full legal notices.";
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
are to be interpreted as described in BCP 14 (RFC 2119)
(RFC 8174) when, and only when, they appear in all
capitals, as shown here.";
revision 2024-03-16 { revision 2024-03-16 {
description description
"Initial version"; "Initial version.";
reference reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; "RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
} }
// Features // Features
feature ssh-client-keepalives { feature ssh-client-keepalives {
description description
"Per socket SSH keepalive parameters are configurable for "SSH keepalive parameters are configurable for
SSH clients on the server implementing this feature."; SSH clients on the server implementing this feature.";
} }
feature client-ident-publickey { feature client-ident-publickey {
description description
"Indicates that the 'publickey' authentication type, per "Indicates that the 'publickey' authentication type, per
RFC 4252, is supported for client identification. RFC 4252, is supported for client identification.
The 'publickey' authentication type is required by The 'publickey' authentication type is required by
RFC 4252, but common implementations allow it to RFC 4252, but common implementations allow it to
be disabled."; be disabled.";
skipping to change at page 33, line 43 skipping to change at line 1355
It is NOT RECOMMENDED to enable this feature."; It is NOT RECOMMENDED to enable this feature.";
reference reference
"RFC 4252: "RFC 4252:
The Secure Shell (SSH) Authentication Protocol"; The Secure Shell (SSH) Authentication Protocol";
} }
// Groupings // Groupings
grouping ssh-client-grouping { grouping ssh-client-grouping {
description description
"A reusable grouping for configuring a SSH client without "A reusable grouping for configuring an SSH client without
any consideration for how an underlying TCP session is any consideration for how an underlying TCP session is
established. established.
Note that this grouping uses fairly typical descendant Note that this grouping uses fairly typical descendant
node names such that a nesting of 'uses' statements will node names such that a nesting of 'uses' statements will
have name conflicts. It is intended that the consuming have name conflicts. It is intended that the consuming
data model will resolve the issue (e.g., by wrapping data model will resolve the issue (e.g., by wrapping
the 'uses' statement in a container called the 'uses' statement in a container called
'ssh-client-parameters'). This model purposely does 'ssh-client-parameters'). This model purposely does
not do this itself so as to provide maximum flexibility not do this itself so as to provide maximum flexibility
to consuming models."; to consuming models.";
container client-identity { container client-identity {
nacm:default-deny-write; nacm:default-deny-write;
description description
"The username and authentication methods for the client. "The username and authentication methods for the client.
The authentication methods are unordered. Clients may The authentication methods are unordered. Clients may
initially send any configured method or, per RFC 4252, initially send any configured method or, per Section 5.2 of
Section 5.2, send the 'none' method to prompt the server RFC 4252, send the 'none' method to prompt the server
to provide a list of productive methods. Whenever a to provide a list of productive methods. Whenever a
choice amongst methods arises, implementations SHOULD choice amongst methods arises, implementations SHOULD
use a default ordering that prioritizes automation use a default ordering that prioritizes automation
over human-interaction."; over human interaction.";
leaf username { leaf username {
type string; type string;
description description
"The username of this user. This will be the username "The username of this user. This will be the username
used, for instance, to log into an SSH server."; used, for instance, to log into an SSH server.";
} }
container public-key { container public-key {
if-feature "client-ident-publickey"; if-feature "client-ident-publickey";
presence presence
"Indicates that publickey-based authentication has been "Indicates that public-key-based authentication has been
configured. This statement is present so the mandatory configured. This statement is present so the mandatory
descendant nodes do not imply that this node must be descendant nodes do not imply that this node must be
configured."; configured.";
description description
"A locally-defined or referenced asymmetric key "A locally defined or referenced asymmetric key
pair to be used for client identification."; pair to be used for client identification.";
reference reference
"RFC CCCC: A YANG Data Model for a Keystore"; "RFC 9642: A YANG Data Model for a Keystore";
uses ks:inline-or-keystore-asymmetric-key-grouping { uses ks:inline-or-keystore-asymmetric-key-grouping {
refine "inline-or-keystore/inline/inline-definition" { refine "inline-or-keystore/inline/inline-definition" {
must 'not(public-key-format) or derived-from-or-self' must 'not(public-key-format) or derived-from-or-self'
+ '(public-key-format, "ct:ssh-public-key-format")'; + '(public-key-format, "ct:ssh-public-key-format")';
} }
refine "inline-or-keystore/central-keystore/" refine "inline-or-keystore/central-keystore/"
+ "central-keystore-reference" { + "central-keystore-reference" {
must 'not(deref(.)/../ks:public-key-format) or derived-' must 'not(deref(.)/../ks:public-key-format) or derived-'
+ 'from-or-self(deref(.)/../ks:public-key-format, ' + 'from-or-self(deref(.)/../ks:public-key-format, '
+ '"ct:ssh-public-key-format")'; + '"ct:ssh-public-key-format")';
skipping to change at page 35, line 17 skipping to change at line 1425
descendant nodes do not imply that this node must be descendant nodes do not imply that this node must be
configured."; configured.";
description description
"A password to be used to authenticate the client's "A password to be used to authenticate the client's
identity."; identity.";
uses ct:password-grouping; uses ct:password-grouping;
} }
container hostbased { container hostbased {
if-feature "client-ident-hostbased"; if-feature "client-ident-hostbased";
presence presence
"Indicates that hostbased authentication is configured. "Indicates that host-based authentication is configured.
This statement is present so the mandatory descendant This statement is present so the mandatory descendant
nodes do not imply that this node must be configured."; nodes do not imply that this node must be configured.";
description description
"A locally-defined or referenced asymmetric key "A locally defined or referenced asymmetric key
pair to be used for host identification."; pair to be used for host identification.";
reference reference
"RFC CCCC: A YANG Data Model for a Keystore"; "RFC 9642: A YANG Data Model for a Keystore";
uses ks:inline-or-keystore-asymmetric-key-grouping { uses ks:inline-or-keystore-asymmetric-key-grouping {
refine "inline-or-keystore/inline/inline-definition" { refine "inline-or-keystore/inline/inline-definition" {
must 'not(public-key-format) or derived-from-or-self(' must 'not(public-key-format) or derived-from-or-self('
+ 'public-key-format, "ct:ssh-public-key-format")'; + 'public-key-format, "ct:ssh-public-key-format")';
} }
refine "inline-or-keystore/central-keystore/" refine "inline-or-keystore/central-keystore/"
+ "central-keystore-reference" { + "central-keystore-reference" {
must 'not(deref(.)/../ks:public-key-format) or derived-' must 'not(deref(.)/../ks:public-key-format) or derived-'
+ 'from-or-self(deref(.)/../ks:public-key-format, ' + 'from-or-self(deref(.)/../ks:public-key-format, '
+ '"ct:ssh-public-key-format")'; + '"ct:ssh-public-key-format")';
} }
} }
} }
leaf none { leaf none {
if-feature "client-ident-none"; if-feature "client-ident-none";
type empty; type empty;
description description
"Indicates that 'none' algorithm is used for client "Indicates that the 'none' algorithm is used for client
identification."; identification.";
} }
container certificate { container certificate {
if-feature "sshcmn:ssh-x509-certs"; if-feature "sshcmn:ssh-x509-certs";
presence presence
"Indicates that certificate-based authentication has been "Indicates that certificate-based authentication has been
configured. This statement is present so the mandatory configured. This statement is present so the mandatory
descendant nodes do not imply that this node must be descendant nodes do not imply that this node must be
configured."; configured.";
description description
"A locally-defined or referenced certificate "A locally defined or referenced certificate
to be used for client identification."; to be used for client identification.";
reference reference
"RFC CCCC: A YANG Data Model for a Keystore"; "RFC 9642: A YANG Data Model for a Keystore";
uses uses
ks:inline-or-keystore-end-entity-cert-with-key-grouping { ks:inline-or-keystore-end-entity-cert-with-key-grouping {
refine "inline-or-keystore/inline/inline-definition" { refine "inline-or-keystore/inline/inline-definition" {
must 'not(public-key-format) or derived-from-or-self(' must 'not(public-key-format) or derived-from-or-self('
+ 'public-key-format, "ct:subject-public-key-info-' + 'public-key-format, "ct:subject-public-key-info-'
+ 'format")'; + 'format")';
} }
refine "inline-or-keystore/central-keystore/" refine "inline-or-keystore/central-keystore/"
+ "central-keystore-reference/asymmetric-key" { + "central-keystore-reference/asymmetric-key" {
must 'not(deref(.)/../ks:public-key-format) or derived-' must 'not(deref(.)/../ks:public-key-format) or derived-'
skipping to change at page 36, line 45 skipping to change at line 1500
presence presence
"Indicates that the SSH host key have been configured. "Indicates that the SSH host key have been configured.
This statement is present so the mandatory descendant This statement is present so the mandatory descendant
nodes do not imply that this node must be configured."; nodes do not imply that this node must be configured.";
description description
"A bag of SSH host keys used by the SSH client to "A bag of SSH host keys used by the SSH client to
authenticate SSH server host keys. A server host key authenticate SSH server host keys. A server host key
is authenticated if it is an exact match to a is authenticated if it is an exact match to a
configured SSH host key."; configured SSH host key.";
reference reference
"RFC BBBB: A YANG Data Model for a Truststore"; "RFC 9641: A YANG Data Model for a Truststore";
uses ts:inline-or-truststore-public-keys-grouping { uses ts:inline-or-truststore-public-keys-grouping {
refine refine
"inline-or-truststore/inline/inline-definition/public" "inline-or-truststore/inline/inline-definition/public"
+ "-key" { + "-key" {
must 'derived-from-or-self(public-key-format,' must 'derived-from-or-self(public-key-format,'
+ ' "ct:ssh-public-key-format")'; + ' "ct:ssh-public-key-format")';
} }
refine "inline-or-truststore/central-truststore/" refine "inline-or-truststore/central-truststore/"
+ "central-truststore-reference" { + "central-truststore-reference" {
must 'not(deref(.)/../ts:public-key/ts:public-key-' must 'not(deref(.)/../ts:public-key/ts:public-key-'
skipping to change at page 37, line 19 skipping to change at line 1523
} }
} }
} }
container ca-certs { container ca-certs {
if-feature "sshcmn:ssh-x509-certs"; if-feature "sshcmn:ssh-x509-certs";
presence presence
"Indicates that the CA certificates have been configured. "Indicates that the CA certificates have been configured.
This statement is present so the mandatory descendant This statement is present so the mandatory descendant
nodes do not imply that this node must be configured."; nodes do not imply that this node must be configured.";
description description
"A set of certificate authority (CA) certificates used by "A set of Certification Authority (CA) certificates used by
the SSH client to authenticate SSH servers. A server the SSH client to authenticate SSH servers. A server
is authenticated if its certificate has a valid chain is authenticated if its certificate has a valid chain
of trust to a configured CA certificate."; of trust to a configured CA certificate.";
reference reference
"RFC BBBB: A YANG Data Model for a Truststore"; "RFC 9641: A YANG Data Model for a Truststore";
uses ts:inline-or-truststore-certs-grouping; uses ts:inline-or-truststore-certs-grouping;
} }
container ee-certs { container ee-certs {
if-feature "sshcmn:ssh-x509-certs"; if-feature "sshcmn:ssh-x509-certs";
presence presence
"Indicates that the EE certificates have been configured. "Indicates that the EE certificates have been configured.
This statement is present so the mandatory descendant This statement is present so the mandatory descendant
nodes do not imply that this node must be configured."; nodes do not imply that this node must be configured.";
description description
"A set of end-entity certificates used by the SSH client "A set of end-entity (EE) certificates used by the SSH
to authenticate SSH servers. A server is authenticated client to authenticate SSH servers. A server is
if its certificate is an exact match to a configured authenticated if its certificate is an exact match to a
end-entity certificate."; configured end-entity certificate.";
reference reference
"RFC BBBB: A YANG Data Model for a Truststore"; "RFC 9641: A YANG Data Model for a Truststore";
uses ts:inline-or-truststore-certs-grouping; uses ts:inline-or-truststore-certs-grouping;
} }
} // container server-authentication } // container server-authentication
container transport-params { container transport-params {
nacm:default-deny-write; nacm:default-deny-write;
if-feature "sshcmn:transport-params"; if-feature "sshcmn:transport-params";
description description
"Configurable parameters of the SSH transport layer."; "Configurable parameters of the SSH transport layer.";
uses sshcmn:transport-params-grouping; uses sshcmn:transport-params-grouping;
skipping to change at page 38, line 4 skipping to change at line 1555
} }
} // container server-authentication } // container server-authentication
container transport-params { container transport-params {
nacm:default-deny-write; nacm:default-deny-write;
if-feature "sshcmn:transport-params"; if-feature "sshcmn:transport-params";
description description
"Configurable parameters of the SSH transport layer."; "Configurable parameters of the SSH transport layer.";
uses sshcmn:transport-params-grouping; uses sshcmn:transport-params-grouping;
} // container transport-parameters } // container transport-parameters
container keepalives { container keepalives {
nacm:default-deny-write; nacm:default-deny-write;
if-feature "ssh-client-keepalives"; if-feature "ssh-client-keepalives";
presence presence
"Indicates that the SSH client proactively tests the "Indicates that the SSH client proactively tests the
aliveness of the remote SSH server."; aliveness of the remote SSH server.";
description description
"Configures the keep-alive policy, to proactively test "Configures the keepalive policy to proactively test
the aliveness of the SSH server. An unresponsive SSH the aliveness of the SSH server. An unresponsive SSH
server is dropped after approximately max-wait * server is dropped after approximately max-wait *
max-attempts seconds. Per Section 4 of RFC 4254, max-attempts seconds. Per Section 4 of RFC 4254,
the SSH client SHOULD send an SSH_MSG_GLOBAL_REQUEST the SSH client SHOULD send an SSH_MSG_GLOBAL_REQUEST
message with a purposely nonexistent 'request name' message with a purposely nonexistent 'request name'
value (e.g., keepalive@ietf.org) and the 'want reply' value (e.g., keepalive@example.com) and the 'want reply'
value set to '1'."; value set to '1'.";
reference reference
"RFC 4254: The Secure Shell (SSH) Connection Protocol"; "RFC 4254: The Secure Shell (SSH) Connection Protocol";
leaf max-wait { leaf max-wait {
type uint16 { type uint16 {
range "1..max"; range "1..max";
} }
units "seconds"; units "seconds";
default "30"; default "30";
description description
"Sets the amount of time in seconds after which if "Sets the amount of time in seconds after which an
no data has been received from the SSH server, a SSH-level message will be sent to test the aliveness
SSH-level message will be sent to test the of the SSH server if no data has been received from the
aliveness of the SSH server."; SSH server.";
} }
leaf max-attempts { leaf max-attempts {
type uint8; type uint8;
default "3"; default "3";
description description
"Sets the maximum number of sequential keep-alive "Sets the maximum number of sequential keepalive
messages that can fail to obtain a response from messages that can fail to obtain a response from
the SSH server before assuming the SSH server is the SSH server before assuming the SSH server is
no longer alive."; no longer alive.";
} }
} // container keepalives } // container keepalives
} // grouping ssh-client-grouping } // grouping ssh-client-grouping
} }
<CODE ENDS> <CODE ENDS>
4. The "ietf-ssh-server" Module 4. The "ietf-ssh-server" Module
This section defines a YANG 1.1 module called "ietf-ssh-server". A This section defines a YANG 1.1 module called "ietf-ssh-server". A
high-level overview of the module is provided in Section 4.1. high-level overview of the module is provided in Section 4.1.
Examples illustrating the module's use are provided in Examples Examples illustrating the module's use are provided in Section 4.2
(Section 4.2). The YANG module itself is defined in Section 4.3. ("Example Usage"). The YANG module itself is defined in Section 4.3.
4.1. Data Model Overview 4.1. Data Model Overview
This section provides an overview of the "ietf-ssh-server" module in This section provides an overview of the "ietf-ssh-server" module in
terms of its features and groupings. terms of its features and groupings.
4.1.1. Features 4.1.1. Features
The following diagram lists all the "feature" statements defined in The following diagram lists all the "feature" statements defined in
the "ietf-ssh-server" module: the "ietf-ssh-server" module:
skipping to change at page 40, line 10 skipping to change at line 1649
4.1.2.1. The "ssh-server-grouping" Grouping 4.1.2.1. The "ssh-server-grouping" Grouping
The following tree diagram [RFC8340] illustrates the "ssh-server- The following tree diagram [RFC8340] illustrates the "ssh-server-
grouping" grouping: grouping" grouping:
=============== NOTE: '\' line wrapping per RFC 8792 ================ =============== NOTE: '\' line wrapping per RFC 8792 ================
grouping ssh-server-grouping: grouping ssh-server-grouping:
+-- server-identity +-- server-identity
| +-- host-key* [name] | +-- host-key* [name]
| +-- name? string | +-- name string
| +-- (host-key-type) | +-- (host-key-type)
| +--:(public-key) | +--:(public-key)
| | +-- public-key | | +-- public-key
| | +---u ks:inline-or-keystore-asymmetric-key-groupi\ | | +---u ks:inline-or-keystore-asymmetric-key-groupi\
ng ng
| +--:(certificate) | +--:(certificate)
| +-- certificate {sshcmn:ssh-x509-certs}? | +-- certificate {sshcmn:ssh-x509-certs}?
| +---u ks:inline-or-keystore-end-entity-cert-with-\ | +---u ks:inline-or-keystore-end-entity-cert-with-\
key-grouping key-grouping
+-- client-authentication +-- client-authentication
| +-- users {local-users-supported}? | +-- users {local-users-supported}?
| | +-- user* [name] | | +-- user* [name]
| | +-- name? string | | +-- name string
| | +-- public-keys! {local-user-auth-publickey}? | | +-- public-keys! {local-user-auth-publickey}?
| | | +---u ts:inline-or-truststore-public-keys-grouping | | | +---u ts:inline-or-truststore-public-keys-grouping
| | +-- password | | +-- password
| | | +-- hashed-password? ianach:crypt-hash | | | +-- hashed-password? ianach:crypt-hash
| | | | {local-user-auth-password}? | | | | {local-user-auth-password}?
| | | +--ro last-modified? yang:date-and-time | | | +--ro last-modified? yang:date-and-time
| | +-- hostbased! {local-user-auth-hostbased}? | | +-- hostbased! {local-user-auth-hostbased}?
| | | +---u ts:inline-or-truststore-public-keys-grouping | | | +---u ts:inline-or-truststore-public-keys-grouping
| | +-- none? empty {local-user-auth-none}? | | +-- none? empty {local-user-auth-none}?
| +-- ca-certs! {sshcmn:ssh-x509-certs}? | +-- ca-certs! {sshcmn:ssh-x509-certs}?
skipping to change at page 41, line 13 skipping to change at line 1700
"feature" statement. "feature" statement.
* The "transport-params" node, which must be enabled by a feature, * The "transport-params" node, which must be enabled by a feature,
configures parameters for the SSH sessions established by this configures parameters for the SSH sessions established by this
configuration. configuration.
* The "keepalives" node, which must be enabled by a feature, * The "keepalives" node, which must be enabled by a feature,
configures a "presence" container for testing the aliveness of the configures a "presence" container for testing the aliveness of the
SSH client. The aliveness-test occurs at the SSH protocol layer. SSH client. The aliveness-test occurs at the SSH protocol layer.
* For the referenced grouping statement(s): * For the referenced grouping statements:
- The "inline-or-keystore-asymmetric-key-grouping" grouping is - The "inline-or-keystore-asymmetric-key-grouping" grouping is
discussed in Section 2.1.3.4 of [I-D.ietf-netconf-keystore]. discussed in Section 2.1.3.4 of [RFC9642].
- The "inline-or-keystore-end-entity-cert-with-key-grouping" - The "inline-or-keystore-end-entity-cert-with-key-grouping"
grouping is discussed in Section 2.1.3.6 of grouping is discussed in Section 2.1.3.6 of [RFC9642].
[I-D.ietf-netconf-keystore].
- The "inline-or-truststore-public-keys-grouping" grouping is - The "inline-or-truststore-public-keys-grouping" grouping is
discussed in Section 2.1.3.4 of discussed in Section 2.1.3.4 of [RFC9641].
[I-D.ietf-netconf-trust-anchors].
- The "inline-or-truststore-certs-grouping" grouping is discussed - The "inline-or-truststore-certs-grouping" grouping is discussed
in Section 2.1.3.3 of [I-D.ietf-netconf-trust-anchors]. in Section 2.1.3.3 of [RFC9641].
- The "transport-params-grouping" grouping is discussed in - The "transport-params-grouping" grouping is discussed in
Section 2.1.2.1 in this document. Section 2.1.2.1 in this document.
4.1.3. Protocol-accessible Nodes 4.1.3. Protocol-Accessible Nodes
The "ietf-ssh-server" module defines only "grouping" statements that The "ietf-ssh-server" module defines only "grouping" statements that
are used by other modules to instantiate protocol-accessible nodes. are used by other modules to instantiate protocol-accessible nodes.
Thus this module, when implemented, does not itself define any Thus, this module, when implemented, does not itself define any
protocol-accessible nodes. protocol-accessible nodes.
4.2. Example Usage 4.2. Example Usage
This section presents two examples showing the "ssh-server-grouping" This section presents two examples showing the "ssh-server-grouping"
grouping populated with some data. These examples are effectively grouping populated with some data. These examples are effectively
the same except the first configures the server identity using a the same, except the first configures the server identity using an
inlined key while the second uses a key configured in a keystore. inlined key, while the second uses a key configured in a keystore.
Both examples are consistent with the examples presented in Both examples are consistent with the examples presented in
Section 2.2.1 of [I-D.ietf-netconf-trust-anchors] and Section 2.2.1 Section 2.2.1 of [RFC9641] and Section 2.2.1 of [RFC9642].
of [I-D.ietf-netconf-keystore].
The following configuration example uses inline-definitions for the The following configuration example uses inline-definitions for the
server identity and client authentication: server identity and client authentication:
=============== NOTE: '\' line wrapping per RFC 8792 ================ =============== NOTE: '\' line wrapping per RFC 8792 ================
<!-- The outermost element below doesn't exist in the data model. --> <!-- The outermost element below doesn't exist in the data model. -->
<!-- It simulates if the "grouping" were a "container" instead. --> <!-- It simulates if the "grouping" were a "container" instead. -->
<ssh-server <ssh-server
skipping to change at page 43, line 51 skipping to change at line 1831
<keepalives> <keepalives>
<max-wait>30</max-wait> <max-wait>30</max-wait>
<max-attempts>3</max-attempts> <max-attempts>3</max-attempts>
</keepalives> </keepalives>
</ssh-server> </ssh-server>
The following configuration example uses central-keystore-references The following configuration example uses central-keystore-references
for the server identity and central-truststore-references for client for the server identity and central-truststore-references for client
authentication: from the keystore: authentication from the keystore:
=============== NOTE: '\' line wrapping per RFC 8792 ================ =============== NOTE: '\' line wrapping per RFC 8792 ================
<!-- The outermost element below doesn't exist in the data model. --> <!-- The outermost element below doesn't exist in the data model. -->
<!-- It simulates if the "grouping" were a "container" instead. --> <!-- It simulates if the "grouping" were a "container" instead. -->
<ssh-server <ssh-server
xmlns="urn:ietf:params:xml:ns:yang:ietf-ssh-server"> xmlns="urn:ietf:params:xml:ns:yang:ietf-ssh-server">
<!-- the host-key this SSH server will present --> <!-- the host-key this SSH server will present -->
skipping to change at page 45, line 4 skipping to change at line 1881
ion A</central-truststore-reference> ion A</central-truststore-reference>
</public-keys> </public-keys>
</user> </user>
</users> </users>
<ca-certs> <ca-certs>
<central-truststore-reference>trusted-client-ca-certs</central\ <central-truststore-reference>trusted-client-ca-certs</central\
-truststore-reference> -truststore-reference>
</ca-certs> </ca-certs>
<ee-certs> <ee-certs>
<central-truststore-reference>trusted-client-ee-certs</central\ <central-truststore-reference>trusted-client-ee-certs</central\
-truststore-reference> -truststore-reference>
</ee-certs> </ee-certs>
</client-authentication> </client-authentication>
<keepalives> <keepalives>
<max-wait>30</max-wait> <max-wait>30</max-wait>
<max-attempts>3</max-attempts> <max-attempts>3</max-attempts>
</keepalives> </keepalives>
</ssh-server> </ssh-server>
4.3. YANG Module 4.3. YANG Module
This YANG module has references to [RFC4251], [RFC4252], [RFC4253], This YANG module has normative references to [RFC4251], [RFC4252],
[RFC4254], [RFC7317], [RFC8341], [I-D.ietf-netconf-crypto-types], [RFC4253], [RFC4254], [RFC6991], [RFC7317], [RFC8341], [RFC9640],
[I-D.ietf-netconf-trust-anchors], and [I-D.ietf-netconf-keystore]. [RFC9641], and [RFC9642].
<CODE BEGINS> file "ietf-ssh-server@2024-03-16.yang" <CODE BEGINS> file "ietf-ssh-server@2024-03-16.yang"
module ietf-ssh-server { module ietf-ssh-server {
yang-version 1.1; yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-ssh-server"; namespace "urn:ietf:params:xml:ns:yang:ietf-ssh-server";
prefix sshs; prefix sshs;
import ietf-yang-types { import ietf-yang-types {
prefix yang; prefix yang;
reference reference
"RFC 6991: Common YANG Data Types"; "RFC 6991: Common YANG Data Types";
} }
skipping to change at page 45, line 50 skipping to change at line 1925
import ietf-netconf-acm { import ietf-netconf-acm {
prefix nacm; prefix nacm;
reference reference
"RFC 8341: Network Configuration Access Control Model"; "RFC 8341: Network Configuration Access Control Model";
} }
import ietf-crypto-types { import ietf-crypto-types {
prefix ct; prefix ct;
reference reference
"RFC AAAA: YANG Data Types and Groupings for Cryptography"; "RFC 9640: YANG Data Types and Groupings for Cryptography";
} }
import ietf-truststore { import ietf-truststore {
prefix ts; prefix ts;
reference reference
"RFC BBBB: A YANG Data Model for a Truststore"; "RFC 9641: A YANG Data Model for a Truststore";
} }
import ietf-keystore { import ietf-keystore {
prefix ks; prefix ks;
reference reference
"RFC CCCC: A YANG Data Model for a Keystore"; "RFC 9642: A YANG Data Model for a Keystore";
} }
import ietf-ssh-common { import ietf-ssh-common {
prefix sshcmn; prefix sshcmn;
reference reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; "RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
} }
organization organization
"IETF NETCONF (Network Configuration) Working Group"; "IETF NETCONF (Network Configuration) Working Group";
contact contact
"WG Web: https://datatracker.ietf.org/wg/netconf "WG Web: https://datatracker.ietf.org/wg/netconf
WG List: NETCONF WG list <mailto:netconf@ietf.org> WG List: NETCONF WG list <mailto:netconf@ietf.org>
Author: Kent Watsen <mailto:kent+ietf@watsen.net>"; Author: Kent Watsen <mailto:kent+ietf@watsen.net>";
description description
"This module defines a reusable grouping for SSH servers that "This module defines a reusable grouping for SSH servers that
can be used as a basis for specific SSH server instances. can be used as a basis for specific SSH server instances.
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
are to be interpreted as described in BCP 14 (RFC 2119)
(RFC 8174) when, and only when, they appear in all
capitals, as shown here.
Copyright (c) 2024 IETF Trust and the persons identified Copyright (c) 2024 IETF Trust and the persons identified
as authors of the code. All rights reserved. as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Revised subject to the license terms contained in, the Revised
BSD License set forth in Section 4.c of the IETF Trust's BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents Legal Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info). (https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC EEEE This version of this YANG module is part of RFC 9644
(https://www.rfc-editor.org/info/rfcEEEE); see the RFC (https://www.rfc-editor.org/info/rfc9644); see the RFC
itself for full legal notices. itself for full legal notices.";
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
are to be interpreted as described in BCP 14 (RFC 2119)
(RFC 8174) when, and only when, they appear in all
capitals, as shown here.";
revision 2024-03-16 { revision 2024-03-16 {
description description
"Initial version"; "Initial version.";
reference reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; "RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
} }
// Features // Features
feature ssh-server-keepalives { feature ssh-server-keepalives {
description description
"Per socket SSH keepalive parameters are configurable for "SSH keepalive parameters are configurable for
SSH servers on the server implementing this feature."; SSH servers on the server implementing this feature.";
} }
feature local-users-supported { feature local-users-supported {
description description
"Indicates that the configuration for users can be "Indicates that the configuration for users can be
configured herein, as opposed to in an application configured herein, as opposed to in an application-
specific location."; specific location.";
} }
feature local-user-auth-publickey { feature local-user-auth-publickey {
if-feature "local-users-supported"; if-feature "local-users-supported";
description description
"Indicates that the 'publickey' authentication type, "Indicates that the 'publickey' authentication type,
per RFC 4252, is supported for locally-defined users. per RFC 4252, is supported for locally defined users.
The 'publickey' authentication type is required by The 'publickey' authentication type is required by
RFC 4252, but common implementations allow it to RFC 4252, but common implementations allow it to
be disabled."; be disabled.";
reference reference
"RFC 4252: "RFC 4252:
The Secure Shell (SSH) Authentication Protocol"; The Secure Shell (SSH) Authentication Protocol";
} }
feature local-user-auth-password { feature local-user-auth-password {
if-feature "local-users-supported"; if-feature "local-users-supported";
description description
"Indicates that the 'password' authentication type, "Indicates that the 'password' authentication type,
per RFC 4252, is supported for locally-defined users."; per RFC 4252, is supported for locally defined users.";
reference reference
"RFC 4252: "RFC 4252:
The Secure Shell (SSH) Authentication Protocol"; The Secure Shell (SSH) Authentication Protocol";
} }
feature local-user-auth-hostbased { feature local-user-auth-hostbased {
if-feature "local-users-supported"; if-feature "local-users-supported";
description description
"Indicates that the 'hostbased' authentication type, "Indicates that the 'hostbased' authentication type,
per RFC 4252, is supported for locally-defined users."; per RFC 4252, is supported for locally defined users.";
reference reference
"RFC 4252: "RFC 4252:
The Secure Shell (SSH) Authentication Protocol"; The Secure Shell (SSH) Authentication Protocol";
} }
feature local-user-auth-none { feature local-user-auth-none {
if-feature "local-users-supported"; if-feature "local-users-supported";
description description
"Indicates that the 'none' authentication type, per "Indicates that the 'none' authentication type, per
RFC 4252, is supported. It is NOT RECOMMENDED to RFC 4252, is supported. It is NOT RECOMMENDED to
enable this feature."; enable this feature.";
reference reference
"RFC 4252: "RFC 4252:
The Secure Shell (SSH) Authentication Protocol"; The Secure Shell (SSH) Authentication Protocol";
} }
// Groupings // Groupings
grouping ssh-server-grouping { grouping ssh-server-grouping {
description description
"A reusable grouping for configuring a SSH server without "A reusable grouping for configuring an SSH server without
any consideration for how underlying TCP sessions are any consideration for how underlying TCP sessions are
established. established.
Note that this grouping uses fairly typical descendant Note that this grouping uses fairly typical descendant
node names such that a nesting of 'uses' statements will node names such that a nesting of 'uses' statements will
have name conflicts. It is intended that the consuming have name conflicts. It is intended that the consuming
data model will resolve the issue (e.g., by wrapping data model will resolve the issue (e.g., by wrapping
the 'uses' statement in a container called the 'uses' statement in a container called
'ssh-server-parameters'). This model purposely does 'ssh-server-parameters'). This model purposely does
not do this itself so as to provide maximum flexibility not do this itself so as to provide maximum flexibility
to consuming models."; to consuming models.";
container server-identity { container server-identity {
nacm:default-deny-write; nacm:default-deny-write;
description description
"The list of host keys the SSH server will present when "The list of host keys the SSH server will present when
establishing a SSH connection."; establishing an SSH connection.";
list host-key { list host-key {
key "name"; key "name";
min-elements 1; min-elements 1;
ordered-by user; ordered-by user;
description description
"An ordered list of host keys (see RFC 4251) the SSH "An ordered list of host keys (see RFC 4251) the SSH
server will use to construct its ordered list of server will use to construct its ordered list of
algorithms, when sending its SSH_MSG_KEXINIT message, algorithms when sending its SSH_MSG_KEXINIT message,
as defined in Section 7.1 of RFC 4253."; as defined in Section 7.1 of RFC 4253.";
reference reference
"RFC 4251: The Secure Shell (SSH) Protocol Architecture "RFC 4251: The Secure Shell (SSH) Protocol Architecture
RFC 4253: The Secure Shell (SSH) Transport Layer RFC 4253: The Secure Shell (SSH) Transport Layer
Protocol"; Protocol";
leaf name { leaf name {
type string; type string;
description description
"An arbitrary name for this host key"; "An arbitrary name for this host key.";
} }
choice host-key-type { choice host-key-type {
mandatory true; mandatory true;
description description
"The type of host key being specified"; "The type of host key being specified.";
container public-key { container public-key {
description description
"A locally-defined or referenced asymmetric key pair "A locally defined or referenced asymmetric key pair
to be used for the SSH server's host key."; to be used for the SSH server's host key.";
reference reference
"RFC CCCC: A YANG Data Model for a Keystore"; "RFC 9642: A YANG Data Model for a Keystore";
uses ks:inline-or-keystore-asymmetric-key-grouping { uses ks:inline-or-keystore-asymmetric-key-grouping {
refine "inline-or-keystore/inline/inline-definition" { refine "inline-or-keystore/inline/inline-definition" {
must 'not(public-key-format) or derived-from-or-self' must 'not(public-key-format) or derived-from-or-self'
+ '(public-key-format, "ct:ssh-public-key-format")'; + '(public-key-format, "ct:ssh-public-key-format")';
} }
refine "inline-or-keystore/central-keystore/" refine "inline-or-keystore/central-keystore/"
+ "central-keystore-reference" { + "central-keystore-reference" {
must 'not(deref(.)/../ks:public-key-format) or ' must 'not(deref(.)/../ks:public-key-format) or '
+ 'derived-from-or-self(deref(.)/../ks:public-' + 'derived-from-or-self(deref(.)/../ks:public-'
+ 'key-format, "ct:ssh-public-key-format")'; + 'key-format, "ct:ssh-public-key-format")';
} }
} }
} }
container certificate { container certificate {
if-feature "sshcmn:ssh-x509-certs"; if-feature "sshcmn:ssh-x509-certs";
description description
"A locally-defined or referenced end-entity "A locally defined or referenced end-entity
certificate to be used for the SSH server's certificate to be used for the SSH server's
host key."; host key.";
reference reference
"RFC CCCC: A YANG Data Model for a Keystore"; "RFC 9642: A YANG Data Model for a Keystore";
uses uses
ks:inline-or-keystore-end-entity-cert-with-key-grouping{ ks:inline-or-keystore-end-entity-cert-with-key-grouping{
refine "inline-or-keystore/inline/inline-definition" { refine "inline-or-keystore/inline/inline-definition" {
must 'not(public-key-format) or derived-from-or-self' must 'not(public-key-format) or derived-from-or-self'
+ '(public-key-format, "ct:subject-public-key-' + '(public-key-format, "ct:subject-public-key-'
+ 'info-format")'; + 'info-format")';
} }
refine "inline-or-keystore/central-keystore/" refine "inline-or-keystore/central-keystore/"
+ "central-keystore-reference/asymmetric-key" { + "central-keystore-reference/asymmetric-key" {
must 'not(deref(.)/../ks:public-key-format) or ' must 'not(deref(.)/../ks:public-key-format) or '
skipping to change at page 50, line 27 skipping to change at line 2143
} }
} // container server-identity } // container server-identity
container client-authentication { container client-authentication {
nacm:default-deny-write; nacm:default-deny-write;
description description
"Specifies how the SSH server can be configured to "Specifies how the SSH server can be configured to
authenticate SSH clients. See RFC 4252 for a general authenticate SSH clients. See RFC 4252 for a general
discussion about SSH authentication."; discussion about SSH authentication.";
reference reference
"RFC 4252: The Secure Shell (SSH) Transport Layer"; "RFC 4252: The Secure Shell (SSH) Authentication Protocol";
container users { container users {
if-feature "local-users-supported"; if-feature "local-users-supported";
description description
"A list of locally configured users."; "A list of locally configured users.";
list user { list user {
key "name"; key "name";
description description
"A locally configured user. "A locally configured user.
The server SHOULD derive the list of authentication The server SHOULD derive the list of authentication
'method names' returned to the SSH client from the 'method names' returned to the SSH client from the
descendant nodes configured herein, per Sections descendant nodes configured herein, per Sections
5.1 and 5.2 in RFC 4252. 5.1 and 5.2 of RFC 4252.
The authentication methods are unordered. Clients The authentication methods are unordered. Clients
must authenticate to all configured methods. must authenticate to all configured methods.
Whenever a choice amongst methods arises, Whenever a choice amongst methods arises,
implementations SHOULD use a default ordering implementations SHOULD use a default ordering
that prioritizes automation over human-interaction."; that prioritizes automation over human interaction.";
leaf name { leaf name {
type string; type string;
description description
"The 'user name' for the SSH client, as defined in "The 'username' for the SSH client, as defined in
the SSH_MSG_USERAUTH_REQUEST message in RFC 4253."; the SSH_MSG_USERAUTH_REQUEST message in RFC 4253.";
reference reference
"RFC 4253: The Secure Shell (SSH) Transport Layer "RFC 4253: The Secure Shell (SSH) Transport Layer
Protocol"; Protocol";
} }
container public-keys { container public-keys {
if-feature "local-user-auth-publickey"; if-feature "local-user-auth-publickey";
presence presence
"Indicates that public keys have been configured. "Indicates that public keys have been configured.
This statement is present so the mandatory descendant This statement is present so the mandatory descendant
nodes do not imply that this node must be nodes do not imply that this node must be
configured."; configured.";
description description
"A set of SSH public keys may be used by the SSH "A set of SSH public keys may be used by the SSH
server to authenticate this user. A user is server to authenticate this user. A user is
authenticated if its public key is an exact authenticated if its public key is an exact
match to a configured public key."; match to a configured public key.";
reference reference
"RFC BBBB: A YANG Data Model for a Truststore"; "RFC 9641: A YANG Data Model for a Truststore";
uses ts:inline-or-truststore-public-keys-grouping { uses ts:inline-or-truststore-public-keys-grouping {
refine "inline-or-truststore/inline/inline-definition/" refine "inline-or-truststore/inline/inline-definition/"
+ "public-key" { + "public-key" {
must 'derived-from-or-self(public-key-format,' must 'derived-from-or-self(public-key-format,'
+ ' "ct:ssh-public-key-format")'; + ' "ct:ssh-public-key-format")';
} }
refine "inline-or-truststore/central-truststore/" refine "inline-or-truststore/central-truststore/"
+ "central-truststore-reference" { + "central-truststore-reference" {
must 'not(deref(.)/../ts:public-key/ts:public-key-' must 'not(deref(.)/../ts:public-key/ts:public-key-'
+ 'format[not(derived-from-or-self(., "ct:ssh-' + 'format[not(derived-from-or-self(., "ct:ssh-'
skipping to change at page 52, line 4 skipping to change at line 2216
if-feature "local-user-auth-password"; if-feature "local-user-auth-password";
type ianach:crypt-hash; type ianach:crypt-hash;
description description
"The password for this user."; "The password for this user.";
} }
leaf last-modified { leaf last-modified {
type yang:date-and-time; type yang:date-and-time;
config false; config false;
description description
"Identifies when the password was last set."; "Identifies when the password was last set.";
} }
} }
container hostbased { container hostbased {
if-feature "local-user-auth-hostbased"; if-feature "local-user-auth-hostbased";
presence presence
"Indicates that hostbased [RFC4252] keys have been "Indicates that host-based (RFC 4252) keys have been
configured. This statement is present so the configured. This statement is present so the
mandatory descendant nodes do not imply that this mandatory descendant nodes do not imply that this
node must be configured."; node must be configured.";
description description
"A set of SSH host keys used by the SSH server to "A set of SSH host keys used by the SSH server to
authenticate this user's host. A user's host is authenticate this user's host. A user's host is
authenticated if its host key is an exact match authenticated if its host key is an exact match
to a configured host key."; to a configured host key.";
reference reference
"RFC 4252: The Secure Shell (SSH) Transport Layer "RFC 4252: The Secure Shell (SSH) Authentication
RFC BBBB: A YANG Data Model for a Truststore"; Protocol
RFC 9641: A YANG Data Model for a Truststore";
uses ts:inline-or-truststore-public-keys-grouping { uses ts:inline-or-truststore-public-keys-grouping {
refine "inline-or-truststore/inline/inline-definition/" refine "inline-or-truststore/inline/inline-definition/"
+ "public-key" { + "public-key" {
must 'derived-from-or-self(public-key-format,' must 'derived-from-or-self(public-key-format,'
+ ' "ct:ssh-public-key-format")'; + ' "ct:ssh-public-key-format")';
} }
refine "inline-or-truststore/central-truststore/" refine "inline-or-truststore/central-truststore/"
+ "central-truststore-reference" { + "central-truststore-reference" {
must 'not(deref(.)/../ts:public-key/ts:public-key-' must 'not(deref(.)/../ts:public-key/ts:public-key-'
+ 'format[not(derived-from-or-self(., "ct:ssh-' + 'format[not(derived-from-or-self(., "ct:ssh-'
skipping to change at page 52, line 44 skipping to change at line 2256
} }
} }
leaf none { leaf none {
if-feature "local-user-auth-none"; if-feature "local-user-auth-none";
type empty; type empty;
description description
"Indicates that the 'none' method is configured "Indicates that the 'none' method is configured
for this user."; for this user.";
reference reference
"RFC 4252: The Secure Shell (SSH) Authentication "RFC 4252: The Secure Shell (SSH) Authentication
Protocol."; Protocol";
} }
} }
} // users } // users
container ca-certs { container ca-certs {
if-feature "sshcmn:ssh-x509-certs"; if-feature "sshcmn:ssh-x509-certs";
presence presence
"Indicates that CA certificates have been configured. "Indicates that CA certificates have been configured.
This statement is present so the mandatory descendant This statement is present so the mandatory descendant
nodes do not imply this node must be configured."; nodes do not imply this node must be configured.";
description description
"A set of certificate authority (CA) certificates used by "A set of Certification Authority (CA) certificates used by
the SSH server to authenticate SSH client certificates. the SSH server to authenticate SSH client certificates.
A client certificate is authenticated if it has a valid A client certificate is authenticated if it has a valid
chain of trust to a configured CA certificate."; chain of trust to a configured CA certificate.";
reference reference
"RFC BBBB: A YANG Data Model for a Truststore"; "RFC 9641: A YANG Data Model for a Truststore";
uses ts:inline-or-truststore-certs-grouping; uses ts:inline-or-truststore-certs-grouping;
} }
container ee-certs { container ee-certs {
if-feature "sshcmn:ssh-x509-certs"; if-feature "sshcmn:ssh-x509-certs";
presence presence
"Indicates that EE certificates have been configured. "Indicates that EE certificates have been configured.
This statement is present so the mandatory descendant This statement is present so the mandatory descendant
nodes do not imply this node must be configured."; nodes do not imply this node must be configured.";
description description
"A set of client certificates (i.e., end entity "A set of client certificates (i.e., end-entity
certificates) used by the SSH server to authenticate certificates) used by the SSH server to authenticate
the certificates presented by SSH clients. A client the certificates presented by SSH clients. A client
certificate is authenticated if it is an exact match certificate is authenticated if it is an exact match
to a configured end-entity certificate."; to a configured end-entity certificate.";
reference reference
"RFC BBBB: A YANG Data Model for a Truststore"; "RFC 9641: A YANG Data Model for a Truststore";
uses ts:inline-or-truststore-certs-grouping; uses ts:inline-or-truststore-certs-grouping;
} }
} // container client-authentication } // container client-authentication
container transport-params { container transport-params {
nacm:default-deny-write; nacm:default-deny-write;
if-feature "sshcmn:transport-params"; if-feature "sshcmn:transport-params";
description description
"Configurable parameters of the SSH transport layer."; "Configurable parameters of the SSH transport layer.";
uses sshcmn:transport-params-grouping; uses sshcmn:transport-params-grouping;
} // container transport-params } // container transport-params
container keepalives { container keepalives {
nacm:default-deny-write; nacm:default-deny-write;
if-feature "ssh-server-keepalives"; if-feature "ssh-server-keepalives";
presence presence
"Indicates that the SSH server proactively tests the "Indicates that the SSH server proactively tests the
aliveness of the remote SSH client."; aliveness of the remote SSH client.";
description description
"Configures the keep-alive policy, to proactively test "Configures the keepalive policy to proactively test
the aliveness of the SSH client. An unresponsive SSH the aliveness of the SSH client. An unresponsive SSH
client is dropped after approximately max-wait * client is dropped after approximately max-wait *
max-attempts seconds. Per Section 4 of RFC 4254, max-attempts seconds. Per Section 4 of RFC 4254,
the SSH server SHOULD send an SSH_MSG_GLOBAL_REQUEST the SSH server SHOULD send an SSH_MSG_GLOBAL_REQUEST
message with a purposely nonexistent 'request name' message with a purposely nonexistent 'request name'
value (e.g., keepalive@ietf.org) and the 'want reply' value (e.g., keepalive@example.com) and the 'want reply'
value set to '1'."; value set to '1'.";
reference reference
"RFC 4254: The Secure Shell (SSH) Connection Protocol"; "RFC 4254: The Secure Shell (SSH) Connection Protocol";
leaf max-wait { leaf max-wait {
type uint16 { type uint16 {
range "1..max"; range "1..max";
} }
units "seconds"; units "seconds";
default "30"; default "30";
description description
"Sets the amount of time in seconds after which "Sets the amount of time in seconds after which
if no data has been received from the SSH client, an SSH-level message will be sent to test the
a SSH-level message will be sent to test the aliveness of the SSH client if no data has been
aliveness of the SSH client."; received from the SSH client.";
} }
leaf max-attempts { leaf max-attempts {
type uint8; type uint8;
default "3"; default "3";
description description
"Sets the maximum number of sequential keep-alive "Sets the maximum number of sequential keepalive
messages that can fail to obtain a response from messages that can fail to obtain a response from
the SSH client before assuming the SSH client is the SSH client before assuming the SSH client is
no longer alive."; no longer alive.";
} }
} }
} // grouping ssh-server-grouping } // grouping ssh-server-grouping
} }
<CODE ENDS> <CODE ENDS>
5. Security Considerations 5. Security Considerations
The three IETF YANG modules in this document define groupings and The three IETF YANG modules in this document define groupings and
will not be deployed as standalone modules. Their security will not be deployed as standalone modules. Their security
implications may be context dependent based on their use in other implications may be context-dependent based on their use in other
modules. The designers of modules which import these grouping must modules. The designers of modules that import these groupings must
conduct their own analysis of the security considerations. conduct their own analysis of the security considerations.
5.1. Considerations for the "iana-ssh-key-exchange-algs" Module 5.1. Considerations for the "iana-ssh-key-exchange-algs" Module
This section follows the template defined in Section 3.7.1 of This section is modeled after the template defined in Section 3.7.1
[RFC8407]. of [RFC8407].
The "iana-ssh-key-exchange-algs" YANG module defines a data model The "iana-ssh-key-exchange-algs" YANG module defines a data model
that is designed to be accessed via YANG based management protocols, that is designed to be accessed via YANG-based management protocols,
such as NETCONF [RFC6241] and RESTCONF [RFC8040]. Both of these such as NETCONF [RFC6241] and RESTCONF [RFC8040]. These protocols
protocols have mandatory-to-implement secure transport layers (e.g., have mandatory-to-implement secure transport layers (e.g., Secure
SSH, TLS) with mutual authentication. Shell (SSH) [RFC4252], TLS [RFC8446], and QUIC [RFC9000]) and
mandatory-to-implement mutual authentication
The Network Access Control Model (NACM) [RFC8341] provides the means The Network Configuration Access Control Model (NACM) [RFC8341]
to restrict access for particular users to a pre-configured subset of provides the means to restrict access for particular users to a
all available protocol operations and content. preconfigured subset of all available protocol operations and
content.
This YANG module defines YANG enumerations, for a public IANA- This YANG module defines YANG enumerations for a public IANA-
maintained registry. maintained registry.
YANG enumerations are not security-sensitive, as they are statically YANG enumerations are not security-sensitive, as they are statically
defined in the publicly-accessible YANG module. IANA MAY deprecate defined in the publicly accessible YANG module. IANA MAY deprecate
and/or obsolete enumerations over time as needed to address security and/or obsolete enumerations over time as needed to address security
issues found in the algorithms. issues found in the algorithms.
This module does not define any writable-nodes, RPCs, actions, or This module does not define any writable nodes, RPCs, actions, or
notifications, and thus the security consideration for such is not notifications, and thus, the security considerations for such are not
provided here. provided here.
5.2. Considerations for the "iana-ssh-encryption-algs" Module 5.2. Considerations for the "iana-ssh-encryption-algs" Module
This section follows the template defined in Section 3.7.1 of This section is modeled after the template defined in Section 3.7.1
[RFC8407]. of [RFC8407].
The "iana-ssh-encryption-algs" YANG module defines a data model that The "iana-ssh-encryption-algs" YANG module defines a data model that
is designed to be accessed via YANG based management protocols, such is designed to be accessed via YANG-based management protocols, such
as NETCONF [RFC6241] and RESTCONF [RFC8040]. Both of these protocols as NETCONF [RFC6241] and RESTCONF [RFC8040]. These protocols have
have mandatory-to-implement secure transport layers (e.g., SSH, TLS) mandatory-to-implement secure transport layers (e.g., Secure Shell
with mutual authentication. (SSH) [RFC4252], TLS [RFC8446], and QUIC [RFC9000]) and mandatory-to-
implement mutual authentication.
The Network Access Control Model (NACM) [RFC8341] provides the means The Network Configuration Access Control Model (NACM) [RFC8341]
to restrict access for particular users to a pre-configured subset of provides the means to restrict access for particular users to a
all available protocol operations and content. preconfigured subset of all available protocol operations and
content.
This YANG module defines YANG enumerations, for a public IANA- This YANG module defines YANG enumerations for a public IANA-
maintained registry. maintained registry.
YANG enumerations are not security-sensitive, as they are statically YANG enumerations are not security-sensitive, as they are statically
defined in the publicly-accessible YANG module. defined in the publicly accessible YANG module.
This module does not define any writable-nodes, RPCs, actions, or This module does not define any writable nodes, RPCs, actions, or
notifications, and thus the security consideration for such is not notifications, and thus, the security considerations for such are not
provided here. provided here.
5.3. Considerations for the "iana-ssh-mac-algs" Module 5.3. Considerations for the "iana-ssh-mac-algs" Module
This section follows the template defined in Section 3.7.1 of This section is modeled after the template defined in Section 3.7.1
[RFC8407]. of [RFC8407].
The "iana-ssh-mac-algs" YANG module defines a data model that is The "iana-ssh-mac-algs" YANG module defines a data model that is
designed to be accessed via YANG based management protocols, such as designed to be accessed via YANG-based management protocols, such as
NETCONF [RFC6241] and RESTCONF [RFC8040]. Both of these protocols NETCONF [RFC6241] and RESTCONF [RFC8040]. These protocols have
have mandatory-to-implement secure transport layers (e.g., SSH, TLS) mandatory-to-implement secure transport layers (e.g., Secure Shell
with mutual authentication. (SSH) [RFC4252], TLS [RFC8446], and QUIC [RFC9000]) and mandatory-to-
implement mutual authentication.
The Network Access Control Model (NACM) [RFC8341] provides the means The Network Configuration Access Control Model (NACM) [RFC8341]
to restrict access for particular users to a pre-configured subset of provides the means to restrict access for particular users to a
all available protocol operations and content. preconfigured subset of all available protocol operations and
content.
This YANG module defines YANG enumerations, for a public IANA- This YANG module defines YANG enumerations for a public IANA-
maintained registry. maintained registry.
YANG enumerations are not security-sensitive, as they are statically YANG enumerations are not security-sensitive, as they are statically
defined in the publicly-accessible YANG module. defined in the publicly accessible YANG module.
This module does not define any writable-nodes, RPCs, actions, or This module does not define any writable nodes, RPCs, actions, or
notifications, and thus the security consideration for such is not notifications, and thus, the security considerations for such are not
provided here. provided here.
5.4. Considerations for the "iana-ssh-public-key-algs" Module 5.4. Considerations for the "iana-ssh-public-key-algs" Module
This section follows the template defined in Section 3.7.1 of This section is modeled after the template defined in Section 3.7.1
[RFC8407]. of [RFC8407].
The "iana-ssh-public-key-algs" YANG module defines a data model that The "iana-ssh-public-key-algs" YANG module defines a data model that
is designed to be accessed via YANG based management protocols, such is designed to be accessed via YANG-based management protocols, such
as NETCONF [RFC6241] and RESTCONF [RFC8040]. Both of these protocols as NETCONF [RFC6241] and RESTCONF [RFC8040]. These protocols have
have mandatory-to-implement secure transport layers (e.g., SSH, TLS) mandatory-to-implement secure transport layers (e.g., Secure Shell
with mutual authentication. (SSH) [RFC4252], TLS [RFC8446], and QUIC [RFC9000]) and mandatory-to-
implement mutual authentication.
The Network Access Control Model (NACM) [RFC8341] provides the means The Network Configuration Access Control Model (NACM) [RFC8341]
to restrict access for particular users to a pre-configured subset of provides the means to restrict access for particular users to a
all available protocol operations and content. preconfigured subset of all available protocol operations and
content.
This YANG module defines YANG enumerations, for a public IANA- This YANG module defines YANG enumerations for a public IANA-
maintained registry. maintained registry.
YANG enumerations are not security-sensitive, as they are statically YANG enumerations are not security-sensitive, as they are statically
defined in the publicly-accessible YANG module. defined in the publicly accessible YANG module.
This module does not define any writable-nodes, RPCs, actions, or This module does not define any writable nodes, RPCs, actions, or
notifications, and thus the security consideration for such is not notifications, and thus, the security considerations for such are not
provided here. provided here.
5.5. Considerations for the "ietf-ssh-common" YANG Module 5.5. Considerations for the "ietf-ssh-common" YANG Module
This section follows the template defined in Section 3.7.1 of This section is modeled after the template defined in Section 3.7.1
[RFC8407]. of [RFC8407].
The "ietf-ssh-common" YANG module defines "grouping" statements that The "ietf-ssh-common" YANG module defines a data model that is
are designed to be accessed via YANG based management protocols, such designed to be accessed via YANG-based management protocols, such as
as NETCONF [RFC6241] and RESTCONF [RFC8040]. Both of these protocols NETCONF [RFC6241] and RESTCONF [RFC8040]. These protocols have
have mandatory-to-implement secure transport layers (e.g., SSH, TLS) mandatory-to-implement secure transport layers (e.g., Secure Shell
with mutual authentication. (SSH) [RFC4252], TLS [RFC8446], and QUIC [RFC9000]) and mandatory-to-
implement mutual authentication.
The Network Access Control Model (NACM) [RFC8341] provides the means The Network Configuration Access Control Model (NACM) [RFC8341]
to restrict access for particular users to a pre-configured subset of provides the means to restrict access for particular users to a
all available protocol operations and content. preconfigured subset of all available protocol operations and
content.
Please be aware that this YANG module uses groupings from other YANG Please be aware that this YANG module uses groupings from other YANG
modules that define nodes that may be considered sensitive or modules that define nodes that may be considered sensitive or
vulnerable in network environments. Please review the Security vulnerable in network environments. Please review the security
Considerations for dependent YANG modules for information as to which considerations for dependent YANG modules for information as to which
nodes may be considered sensitive or vulnerable in network nodes may be considered sensitive or vulnerable in network
environments. environments.
None of the readable data nodes defined in this YANG module are None of the readable data nodes defined in this YANG module are
considered sensitive or vulnerable in network environments. The NACM considered sensitive or vulnerable in network environments. The NACM
"default-deny-all" extension has not been set for any data nodes "default-deny-all" extension has not been set for any data nodes
defined in this module. defined in this module.
None of the writable data nodes defined in this YANG module are None of the writable data nodes defined in this YANG module are
considered sensitive or vulnerable in network environments. The NACM considered sensitive or vulnerable in network environments. The NACM
"default-deny-write" extension has not been set for any data nodes "default-deny-write" extension has not been set for any data nodes
defined in this module. defined in this module.
This module defines the RPC "generate-asymmetric-key-pair" that may, This module defines the "generate-asymmetric-key-pair" RPC, which
if the "ct:cleartext-private-keys" feature is enabled, and the client may, if the "ct:cleartext-private-keys" feature is enabled and the
requests it, return the private clear in cleartext form. It is NOT client requests it, return the private clear in cleartext form. It
RECOMMENDED for private keys to pass the server's security perimeter. is NOT RECOMMENDED for private keys to pass the server's security
perimeter.
This module does not define any actions or notifications, and thus This module does not define any actions or notifications, and thus,
the security consideration for such is not provided here. the security considerations for such are not provided here.
5.6. Considerations for the "ietf-ssh-client" YANG Module 5.6. Considerations for the "ietf-ssh-client" YANG Module
This section follows the template defined in Section 3.7.1 of This section is modeled after the template defined in Section 3.7.1
[RFC8407]. of [RFC8407].
The "ietf-ssh-client" YANG module defines "grouping" statements that The "ietf-ssh-client" YANG module defines "grouping" statements that
are designed to be accessed via YANG based management protocols, such are designed to be accessed via YANG-based management protocols, such
as NETCONF [RFC6241] and RESTCONF [RFC8040]. Both of these protocols as NETCONF [RFC6241] and RESTCONF [RFC8040]. These protocols have
have mandatory-to-implement secure transport layers (e.g., SSH, TLS) mandatory-to-implement secure transport layers (e.g., Secure Shell
with mutual authentication. (SSH) [RFC4252], TLS [RFC8446], and QUIC [RFC9000]) and mandatory-to-
implement mutual authentication.
The Network Access Control Model (NACM) [RFC8341] provides the means The Network Configuration Access Control Model (NACM) [RFC8341]
to restrict access for particular users to a pre-configured subset of provides the means to restrict access for particular users to a
all available protocol operations and content. preconfigured subset of all available protocol operations and
content.
Please be aware that this YANG module uses groupings from other YANG Please be aware that this YANG module uses groupings from other YANG
modules that define nodes that may be considered sensitive or modules that define nodes that may be considered sensitive or
vulnerable in network environments. Please review the Security vulnerable in network environments. Please review the security
Considerations for dependent YANG modules for information as to which considerations for dependent YANG modules for information as to which
nodes may be considered sensitive or vulnerable in network nodes may be considered sensitive or vulnerable in network
environments. environments.
One readable data node defined in this YANG module may be considered One readable data node defined in this YANG module may be considered
sensitive or vulnerable in some network environments. This node is sensitive or vulnerable in some network environments. This node is
as follows: as follows:
* The "client-identity/password" node: * The "client-identity/password" node:
The cleartext "password" node defined in the "ssh-client- The cleartext "password" node defined in the "ssh-client-
skipping to change at page 58, line 42 skipping to change at line 2550
all" has been applied to it. all" has been applied to it.
All the writable data nodes defined by this module may be considered All the writable data nodes defined by this module may be considered
sensitive or vulnerable in some network environments. For instance, sensitive or vulnerable in some network environments. For instance,
any modification to a key or reference to a key may dramatically any modification to a key or reference to a key may dramatically
alter the implemented security policy. For this reason, the NACM alter the implemented security policy. For this reason, the NACM
extension "default-deny-write" has been set for all data nodes extension "default-deny-write" has been set for all data nodes
defined in this module. defined in this module.
This module does not define any RPCs, actions, or notifications, and This module does not define any RPCs, actions, or notifications, and
thus the security consideration for such is not provided here. thus, the security considerations for such are not provided here.
5.7. Considerations for the "ietf-ssh-server" YANG Module 5.7. Considerations for the "ietf-ssh-server" YANG Module
This section follows the template defined in Section 3.7.1 of This section is modeled after the template defined in Section 3.7.1
[RFC8407]. of [RFC8407].
The "ietf-ssh-server" YANG module defines "grouping" statements that The "ietf-ssh-server" YANG module defines "grouping" statements that
are designed to be accessed via YANG based management protocols, such are designed to be accessed via YANG-based management protocols, such
as NETCONF [RFC6241] and RESTCONF [RFC8040]. Both of these protocols as NETCONF [RFC6241] and RESTCONF [RFC8040]. These protocols have
have mandatory-to-implement secure transport layers (e.g., SSH, TLS) mandatory-to-implement secure transport layers (e.g., Secure Shell
with mutual authentication. (SSH) [RFC4252], TLS [RFC8446], and QUIC [RFC9000]) and mandatory-to-
implement mutual authentication.
The Network Access Control Model (NACM) [RFC8341] provides the means The Network Configuration Access Control Model (NACM) [RFC8341]
to restrict access for particular users to a pre-configured subset of provides the means to restrict access for particular users to a
all available protocol operations and content. preconfigured subset of all available protocol operations and
content.
Please be aware that this YANG module uses groupings from other YANG Please be aware that this YANG module uses groupings from other YANG
modules that define nodes that may be considered sensitive or modules that define nodes that may be considered sensitive or
vulnerable in network environments. Please review the Security vulnerable in network environments. Please review the security
Considerations for dependent YANG modules for information as to which considerations for dependent YANG modules for information as to which
nodes may be considered sensitive or vulnerable in network nodes may be considered sensitive or vulnerable in network
environments. environments.
None of the readable data nodes defined in this YANG module are None of the readable data nodes defined in this YANG module are
considered sensitive or vulnerable in network environments. The NACM considered sensitive or vulnerable in network environments. The NACM
"default-deny-all" extension has not been set for any data nodes "default-deny-all" extension has not been set for any data nodes
defined in this module. defined in this module.
All the writable data nodes defined by this module may be considered All the writable data nodes defined by this module may be considered
sensitive or vulnerable in some network environments. For instance, sensitive or vulnerable in some network environments. For instance,
the addition or removal of references to keys, certificates, trusted the addition or removal of references to keys, certificates, trusted
anchors, etc., or even the modification of transport or keepalive anchors, etc., or even the modification of transport or keepalive
parameters can dramatically alter the implemented security policy. parameters can dramatically alter the implemented security policy.
For this reason, the NACM extension "default-deny-write" has been set For this reason, the NACM extension "default-deny-write" has been set
for all data nodes defined in this module. for all data nodes defined in this module.
This module does not define any RPCs, actions, or notifications, and This module does not define any RPCs, actions, or notifications, and
thus the security consideration for such is not provided here. thus, the security considerations for such are not provided here.
6. IANA Considerations 6. IANA Considerations
6.1. The "IETF XML" Registry 6.1. The IETF XML Registry
This document registers seven URIs in the "ns" subregistry of the IANA has registered seven URIs in the "ns" registry of the "IETF XML
IETF XML Registry [RFC3688]. Following the format in [RFC3688], the Registry" [RFC3688] as follows.
following registrations are requested:
URI: urn:ietf:params:xml:ns:yang:iana-ssh-key-exchange-algs URI: urn:ietf:params:xml:ns:yang:iana-ssh-key-exchange-algs
Registrant Contact: The IESG Registrant Contact: The IESG
XML: N/A, the requested URI is an XML namespace. XML: N/A; the requested URI is an XML namespace.
URI: urn:ietf:params:xml:ns:yang:iana-ssh-encryption-algs URI: urn:ietf:params:xml:ns:yang:iana-ssh-encryption-algs
Registrant Contact: The IESG Registrant Contact: The IESG
XML: N/A, the requested URI is an XML namespace. XML: N/A; the requested URI is an XML namespace.
URI: urn:ietf:params:xml:ns:yang:iana-ssh-mac-algs URI: urn:ietf:params:xml:ns:yang:iana-ssh-mac-algs
Registrant Contact: The IESG Registrant Contact: The IESG
XML: N/A, the requested URI is an XML namespace. XML: N/A; the requested URI is an XML namespace.
URI: urn:ietf:params:xml:ns:yang:iana-ssh-public-key-algs URI: urn:ietf:params:xml:ns:yang:iana-ssh-public-key-algs
Registrant Contact: The IESG Registrant Contact: The IESG
XML: N/A, the requested URI is an XML namespace. XML: N/A; the requested URI is an XML namespace.
URI: urn:ietf:params:xml:ns:yang:ietf-ssh-common URI: urn:ietf:params:xml:ns:yang:ietf-ssh-common
Registrant Contact: The IESG Registrant Contact: The IESG
XML: N/A, the requested URI is an XML namespace. XML: N/A; the requested URI is an XML namespace.
URI: urn:ietf:params:xml:ns:yang:ietf-ssh-client URI: urn:ietf:params:xml:ns:yang:ietf-ssh-client
Registrant Contact: The IESG Registrant Contact: The IESG
XML: N/A, the requested URI is an XML namespace. XML: N/A; the requested URI is an XML namespace.
URI: urn:ietf:params:xml:ns:yang:ietf-ssh-server URI: urn:ietf:params:xml:ns:yang:ietf-ssh-server
Registrant Contact: The IESG Registrant Contact: The IESG
XML: N/A, the requested URI is an XML namespace. XML: N/A; the requested URI is an XML namespace.
6.2. The "YANG Module Names" Registry 6.2. The YANG Module Names Registry
This document registers seven YANG modules in the YANG Module Names IANA has registered seven YANG modules in the "YANG Module Names"
registry [RFC6020]. Following the format in [RFC6020], the following registry [RFC6020] as follows.
registrations are requested:
name: iana-ssh-key-exchange-algs Name: iana-ssh-key-exchange-algs
namespace: urn:ietf:params:xml:ns:yang:iana-ssh-key-exchange-algs Namespace: urn:ietf:params:xml:ns:yang:iana-ssh-key-exchange-algs
prefix: sshkea Prefix: sshkea
reference: RFC EEEE Reference: RFC 9644
name: iana-ssh-encryption-algs Name: iana-ssh-encryption-algs
namespace: urn:ietf:params:xml:ns:yang:iana-ssh-encryption-algs Namespace: urn:ietf:params:xml:ns:yang:iana-ssh-encryption-algs
prefix: sshea Prefix: sshea
reference: RFC EEEE Reference: RFC 9644
name: iana-ssh-mac-algs Name: iana-ssh-mac-algs
namespace: urn:ietf:params:xml:ns:yang:iana-ssh-mac-algs Namespace: urn:ietf:params:xml:ns:yang:iana-ssh-mac-algs
prefix: sshma Prefix: sshma
reference: RFC EEEE Reference: RFC 9644
name: iana-ssh-public-key-algs Name: iana-ssh-public-key-algs
namespace: urn:ietf:params:xml:ns:yang:iana-ssh-public-key-algs Namespace: urn:ietf:params:xml:ns:yang:iana-ssh-public-key-algs
prefix: sshpka Prefix: sshpka
reference: RFC EEEE Reference: RFC 9644
name: ietf-ssh-common Name: ietf-ssh-common
namespace: urn:ietf:params:xml:ns:yang:ietf-ssh-common Namespace: urn:ietf:params:xml:ns:yang:ietf-ssh-common
prefix: sshcmn Prefix: sshcmn
reference: RFC EEEE Reference: RFC 9644
name: ietf-ssh-client Name: ietf-ssh-client
namespace: urn:ietf:params:xml:ns:yang:ietf-ssh-client Namespace: urn:ietf:params:xml:ns:yang:ietf-ssh-client
prefix: sshc Prefix: sshc
reference: RFC EEEE Reference: RFC 9644
name: ietf-ssh-server Name: ietf-ssh-server
namespace: urn:ietf:params:xml:ns:yang:ietf-ssh-server Namespace: urn:ietf:params:xml:ns:yang:ietf-ssh-server
prefix: sshs Prefix: sshs
reference: RFC EEEE Reference: RFC 9644
6.3. Considerations for the "iana-ssh-encryption-algs" Module 6.3. Considerations for the "iana-ssh-encryption-algs" Module
This section follows the template defined in Section 4.30.3.1 of This section follows the template defined in Section 4.30.3.1 of
[I-D.ietf-netmod-rfc8407bis]. [YANG-GUIDE].
This document presents a script (see Appendix A) for IANA to use to This document presents a script (see Appendix A) for IANA to use to
generate the IANA-maintained "iana-ssh-encryption-algs" YANG module. generate the IANA-maintained "iana-ssh-encryption-algs" YANG module.
The most recent version of the YANG module is available from the The most recent version of the YANG module is available in the "YANG
"YANG Parameters" registry [IANA-YANG-PARAMETERS]. Parameters" registry group [IANA-YANG-PARAMETERS].
IANA is requested to add the following note to the registry: IANA has added the following note to the registry:
| New values must not be directly added to the "iana-ssh-encryption- | New values must not be directly added to the "iana-ssh-encryption-
| algs" YANG module. They must instead be added to the "Encryption | algs" YANG module. They must instead be added to the "Encryption
| Algorithm Names" sub-registry of the "Secure Shell (SSH) Protocol | Algorithm Names" registry of the "Secure Shell (SSH) Protocol
| Parameters" registry [IANA-ENC-ALGS]. | Parameters" registry group [IANA-ENC-ALGS].
When a value is added to the "Encryption Algorithm Names" sub- When a value is added to the "Encryption Algorithm Names" registry, a
registry, a new "enum" statement must be added to the "iana-ssh- new "enum" statement must be added to the "iana-ssh-encryption-algs"
encryption-algs" YANG module. The "enum" statement, and sub- YANG module. The "enum" statement, and substatements thereof, should
statements thereof, should be defined as follows: be defined as follows:
enum enum
Replicates a name from the registry. Replicates a name from the registry.
value value
Contains the decimal value of the IANA-assigned value. Contains the decimal value of the IANA-assigned value.
status status
Include only if a registration has been deprecated or obsoleted. Include only if a registration has been deprecated or obsoleted.
An IANA "Note" containing the word "HISTORIC" maps to YANG status An IANA "Note" containing the word "HISTORIC" maps to YANG status
skipping to change at page 62, line 41 skipping to change at line 2715
reference reference
Replicates the reference(s) from the registry with the title of Replicates the reference(s) from the registry with the title of
the document(s) added. the document(s) added.
Unassigned or reserved values are not present in the module. Unassigned or reserved values are not present in the module.
When the "iana-ssh-encryption-algs" YANG module is updated, a new When the "iana-ssh-encryption-algs" YANG module is updated, a new
"revision" statement with a unique revision date must be added in "revision" statement with a unique revision date must be added in
front of the existing revision statements. The "revision" must have front of the existing revision statements. The "revision" must have
a "description" statement explaining why the the update occurred, and a "description" statement explaining why the update occurred and must
must have a "reference" substatement that points to the document have a "reference" substatement that points to the document defining
defining the registry update that resulted in this change. For the registry update that resulted in this change. For instance:
instance:
revision 2024-02-02 { revision 2024-02-02 {
description description
"This update reflect the update made to the underlying "This update reflects the update made to the underlying
Foo Bar registry per RFC XXXX."; Foo Bar registry per RFC XXXX.";
reference reference
"RFC XXXX: Extend the Foo Bars Registry "RFC XXXX: Extend the Foo Bars Registry
to Support Something Important"; to Support Something Important";
} }
IANA is requested to add the following note to the "Encryption IANA has added the following note to the "Encryption Algorithm Names"
Algorithm Names" sub-registry. registry.
| When this registry is modified, the YANG module "iana-ssh- | When this registry is modified, the YANG module "iana-ssh-
| encryption-algs" [IANA-YANG-PARAMETERS] must be updated as defined | encryption-algs" [IANA-YANG-PARAMETERS] must be updated as defined
| in RFC EEEE. | in RFC 9644.
6.4. Considerations for the "iana-ssh-mac-algs" Module 6.4. Considerations for the "iana-ssh-mac-algs" Module
This section follows the template defined in Section 4.30.3.1 of This section follows the template defined in Section 4.30.3.1 of
[I-D.ietf-netmod-rfc8407bis]. [YANG-GUIDE].
This document presents a script (see Appendix A) for IANA to use to This document presents a script (see Appendix A) for IANA to use to
generate the IANA-maintained "iana-ssh-mac-algs" YANG module. The generate the IANA-maintained "iana-ssh-mac-algs" YANG module. The
most recent version of the YANG module is available from the "YANG most recent version of the YANG module is available in the "YANG
Parameters" registry [IANA-YANG-PARAMETERS]. Parameters" registry group [IANA-YANG-PARAMETERS].
IANA is requested to add the following note to the registry: IANA has added the following note to the registry:
| New values must not be directly added to the "iana-ssh-mac-algs" | New values must not be directly added to the "iana-ssh-mac-algs"
| YANG module. They must instead be added to the "MAC Algorithm | YANG module. They must instead be added to the "MAC Algorithm
| Names" sub-registry of the "Secure Shell (SSH) Protocol | Names" registry of the "Secure Shell (SSH) Protocol Parameters"
| Parameters" registry [IANA-MAC-ALGS]. | registry group [IANA-MAC-ALGS].
When a value is added to the "MAC Algorithm Names" sub-registry, a When a value is added to the "MAC Algorithm Names" registry, a new
new "enum" statement must be added to the "iana-ssh-mac-algs" YANG "enum" statement must be added to the "iana-ssh-mac-algs" YANG
module. The "enum" statement, and sub-statements thereof, should be module. The "enum" statement, and substatements thereof, should be
defined as follows: defined as follows:
enum enum
Replicates a name from the registry. Replicates a name from the registry.
value value
Contains the decimal value of the IANA-assigned value. Contains the decimal value of the IANA-assigned value.
status status
Include only if a registration has been deprecated or obsoleted. Include only if a registration has been deprecated or obsoleted.
skipping to change at page 64, line 18 skipping to change at line 2779
reference reference
Replicates the reference(s) from the registry with the title of Replicates the reference(s) from the registry with the title of
the document(s) added. the document(s) added.
Unassigned or reserved values are not present in the module. Unassigned or reserved values are not present in the module.
When the "iana-ssh-mac-algs" YANG module is updated, a new "revision" When the "iana-ssh-mac-algs" YANG module is updated, a new "revision"
statement with a unique revision date must be added in front of the statement with a unique revision date must be added in front of the
existing revision statements. The "revision" must have a existing revision statements. The "revision" must have a
"description" statement explaining why the the update occurred, and "description" statement explaining why the update occurred and must
must have a "reference" substatement that points to the document have a "reference" substatement that points to the document defining
defining the registry update that resulted in this change. For the registry update that resulted in this change. For instance:
instance:
revision 2024-02-02 { revision 2024-02-02 {
description description
"This update reflect the update made to the underlying "This update reflects the update made to the underlying
Foo Bar registry per RFC XXXX."; Foo Bar registry per RFC XXXX.";
reference reference
"RFC XXXX: Extend the Foo Bars Registry "RFC XXXX: Extend the Foo Bars Registry
to Support Something Important"; to Support Something Important";
} }
IANA is requested to add the following note to the "MAC Algorithm IANA has added the following note to the "MAC Algorithm Names"
Names" sub-registry. registry.
| When this registry is modified, the YANG module "iana-ssh-mac- | When this registry is modified, the YANG module "iana-ssh-mac-
| algs" [IANA-YANG-PARAMETERS] must be updated as defined in RFC | algs" [IANA-YANG-PARAMETERS] must be updated as defined in RFC
| EEEE. | 9644.
6.5. Considerations for the "iana-ssh-public-key-algs" Module 6.5. Considerations for the "iana-ssh-public-key-algs" Module
This section follows the template defined in Section 4.30.3.1 of This section follows the template defined in Section 4.30.3.1 of
[I-D.ietf-netmod-rfc8407bis]. [YANG-GUIDE].
This document presents a script (see Appendix A) for IANA to use to This document presents a script (see Appendix A) for IANA to use to
generate the IANA-maintained "iana-ssh-public-key-algs" YANG module. generate the IANA-maintained "iana-ssh-public-key-algs" YANG module.
The most recent version of the YANG module is available from the The most recent version of the YANG module is available in the "YANG
"YANG Parameters" registry [IANA-YANG-PARAMETERS]. Parameters" registry group [IANA-YANG-PARAMETERS].
IANA is requested to add the following note to the registry: IANA has added the following note to the registry:
| New values must not be directly added to the "iana-ssh-public-key- | New values must not be directly added to the "iana-ssh-public-key-
| algs" YANG module. They must instead be added to the "Public Key | algs" YANG module. They must instead be added to the "Public Key
| Algorithm Names" sub-registry of the "Secure Shell (SSH) Protocol | Algorithm Names" registry of the "Secure Shell (SSH) Protocol
| Parameters" registry [IANA-PUBKEY-ALGS]. | Parameters" registry group [IANA-PUBKEY-ALGS].
When a value is added to the "Public Key Algorithm Names" sub- When a value is added to the "Public Key Algorithm Names" registry, a
registry, a new "enum" statement must be added to the "iana-ssh- new "enum" statement must be added to the "iana-ssh-public-key-algs"
public-key-algs" YANG module. The "enum" statement, and sub- YANG module. The "enum" statement, and substatements thereof, should
statements thereof, should be defined as follows: be defined as follows:
enum enum
Replicates a name from the registry. Replicates a name from the registry.
value value
Contains the decimal value of the IANA-assigned value. Contains the decimal value of the IANA-assigned value.
status status
Include only if a registration has been deprecated or obsoleted. Include only if a registration has been deprecated or obsoleted.
description description
Contains "Enumeration for the 'foo-bar' algorithm.", where "foo- Contains "Enumeration for the 'foo-bar' algorithm.", where "foo-
bar" is a placeholder for the algorithm's name (e.g., "3des-cbc"). bar" is a placeholder for the algorithm's name (e.g., "3des-cbc").
reference reference
Replicates the reference(s) from the registry with the title of Replicates the reference(s) from the registry with the title of
the document(s) added. the document(s) added.
In the case that the algorithm name ends with "-*", the familiy of In the case that the algorithm name ends with "-*", the family of
enumerations must be added. The familiy of enum algorithm names are enumerations must be added. The family of enum algorithm names are
generated by replacing the '*' character with these strings: generated by replacing the "*" character with these strings:
"nistp256", "nistp384", "nistp521", "1.3.132.0.1", "nistp256", "nistp384", "nistp521", "1.3.132.0.1",
"1.2.840.10045.3.1.1", "1.3.132.0.33", "1.3.132.0.26", "1.2.840.10045.3.1.1", "1.3.132.0.33", "1.3.132.0.26",
"1.3.132.0.27", "1.3.132.0.16", "1.3.132.0.36", "1.3.132.0.37", and "1.3.132.0.27", "1.3.132.0.16", "1.3.132.0.36", "1.3.132.0.37", and
"1.3.132.0.38". "1.3.132.0.38".
Unassigned or reserved values are not present in the module. Unassigned or reserved values are not present in the module.
When the "iana-ssh-public-key-algs" YANG module is updated, a new When the "iana-ssh-public-key-algs" YANG module is updated, a new
"revision" statement with a unique revision date must be added in "revision" statement with a unique revision date must be added in
front of the existing revision statements. The "revision" must have front of the existing revision statements. The "revision" must have
a "description" statement explaining why the the update occurred, and a "description" statement explaining why the update occurred and must
must have a "reference" substatement that points to the document have a "reference" substatement that points to the document defining
defining the registry update that resulted in this change. For the registry update that resulted in this change. For instance:
instance:
revision 2024-02-02 { revision 2024-02-02 {
description description
"This update reflect the update made to the underlying "This update reflects the update made to the underlying
Foo Bar registry per RFC XXXX."; Foo Bar registry per RFC XXXX.";
reference reference
"RFC XXXX: Extend the Foo Bars Registry "RFC XXXX: Extend the Foo Bars Registry
to Support Something Important"; to Support Something Important";
} }
IANA is requested to add the following note to the "Public Key IANA has added the following note to the "Public Key Algorithm Names"
Algorithm Names" sub-registry. registry.
| When this registry is modified, the YANG module "iana-ssh-public- | When this registry is modified, the YANG module "iana-ssh-public-
| key-algs" [IANA-YANG-PARAMETERS] must be updated as defined in RFC | key-algs" [IANA-YANG-PARAMETERS] must be updated as defined in RFC
| EEEE. | 9644.
6.6. Considerations for the "iana-ssh-key-exchange-algs" Module 6.6. Considerations for the "iana-ssh-key-exchange-algs" Module
This section follows the template defined in Section 4.30.3.1 of This section follows the template defined in Section 4.30.3.1 of
[I-D.ietf-netmod-rfc8407bis]. [YANG-GUIDE].
This document presents a script (see Appendix A) for IANA to use to This document presents a script (see Appendix A) for IANA to use to
generate the IANA-maintained "iana-ssh-key-exchange-algs" YANG generate the IANA-maintained "iana-ssh-key-exchange-algs" YANG
module. The most recent version of the YANG module is available from module. The most recent version of the YANG module is available in
the "YANG Parameters" registry [IANA-YANG-PARAMETERS]. the "YANG Parameters" registry group [IANA-YANG-PARAMETERS].
IANA is requested to add the following note to the registry: IANA has added the following note to the registry:
| New values must not be directly added to the "iana-ssh-key- | New values must not be directly added to the "iana-ssh-key-
| exchange-algs" YANG module. They must instead be added to the | exchange-algs" YANG module. They must instead be added to the
| "Key Exchange Method Names" sub-registry of the "Secure Shell | "Key Exchange Method Names" registry of the "Secure Shell (SSH)
| (SSH) Protocol Parameters" registry [IANA-KEYEX-ALGS]. | Protocol Parameters" registry group [IANA-KEYEX-ALGS].
When a value is added to the "Key Exchange Method Names" sub- When a value is added to the "Key Exchange Method Names" registry, a
registry, a new "enum" statement must be added to the "iana-ssh-key- new "enum" statement must be added to the "iana-ssh-key-exchange-
exchange-algs" YANG module. The "enum" statement, and sub-statements algs" YANG module. The "enum" statement, and substatements thereof,
thereof, should be defined as follows: should be defined as follows:
enum enum
Replicates a name from the registry. Replicates a name from the registry.
value value
Contains the decimal value of the IANA-assigned value. Contains the decimal value of the IANA-assigned value.
status status
Include only if a registration has been deprecated or obsoleted. Include only if a registration has been deprecated or obsoleted.
An IANA "OK to Implement" containing "SHOULD NOT" maps to YANG An IANA "OK to Implement" containing "SHOULD NOT" maps to YANG
skipping to change at page 67, line 19 skipping to change at line 2913
NOT" maps to YANG status "obsolete". NOT" maps to YANG status "obsolete".
description description
Contains "Enumeration for the 'foo-bar' algorithm.", where "foo- Contains "Enumeration for the 'foo-bar' algorithm.", where "foo-
bar" is a placeholder for the algorithm's name (e.g., "3des-cbc"). bar" is a placeholder for the algorithm's name (e.g., "3des-cbc").
reference reference
Replicates the reference(s) from the registry with the title of Replicates the reference(s) from the registry with the title of
the document(s) added. the document(s) added.
In the case that the algorithm name ends with "-*", the familiy of In the case that the algorithm name ends with "-*", the family of
enumerations must be added. The familiy of enum algorithm names are enumerations must be added. The family of enum algorithm names are
generated by replacing the '*' character with these strings: generated by replacing the "*" character with these strings:
"nistp256", "nistp384", "nistp521", "1.3.132.0.1", "nistp256", "nistp384", "nistp521", "1.3.132.0.1",
"1.2.840.10045.3.1.1", "1.3.132.0.33", "1.3.132.0.26", "1.2.840.10045.3.1.1", "1.3.132.0.33", "1.3.132.0.26",
"1.3.132.0.27", "1.3.132.0.16", "1.3.132.0.36", "1.3.132.0.37", and "1.3.132.0.27", "1.3.132.0.16", "1.3.132.0.36", "1.3.132.0.37", and
"1.3.132.0.38". "1.3.132.0.38".
Unassigned or reserved values are not present in the module. Unassigned or reserved values are not present in the module.
When the "iana-ssh-key-exchange-algs" YANG module is updated, a new When the "iana-ssh-key-exchange-algs" YANG module is updated, a new
"revision" statement with a unique revision date must be added in "revision" statement with a unique revision date must be added in
front of the existing revision statements. The "revision" must have front of the existing revision statements. The "revision" must have
a "description" statement explaining why the the update occurred, and a "description" statement explaining why the update occurred, and
must have a "reference" substatement that points to the document must have a "reference" substatement that points to the document
defining the registry update that resulted in this change. For defining the registry update that resulted in this change. For
instance: instance:
revision 2024-02-02 { revision 2024-02-02 {
description description
"This update reflect the update made to the underlying "This update reflects the update made to the underlying
Foo Bar registry per RFC XXXX."; Foo Bar registry per RFC XXXX.";
reference reference
"RFC XXXX: Extend the Foo Bars Registry "RFC XXXX: Extend the Foo Bars Registry
to Support Something Important"; to Support Something Important";
} }
IANA is requested to add the following note to the "Key Exchange IANA has added the following note to the "Key Exchange Method Names"
Method Names" sub-registry. registry.
| When this registry is modified, the YANG module "iana-ssh-key- | When this registry is modified, the YANG module "iana-ssh-key-
| exchange-algs" [IANA-YANG-PARAMETERS] must be updated as defined | exchange-algs" [IANA-YANG-PARAMETERS] must be updated as defined
| in RFC EEEE. | in RFC 9644.
7. References 7. References
7.1. Normative References 7.1. Normative References
[I-D.ietf-netconf-crypto-types]
Watsen, K., "YANG Data Types and Groupings for
Cryptography", Work in Progress, Internet-Draft, draft-
ietf-netconf-crypto-types-33, 1 March 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
crypto-types-33>.
[I-D.ietf-netconf-keystore]
Watsen, K., "A YANG Data Model for a Keystore and Keystore
Operations", Work in Progress, Internet-Draft, draft-ietf-
netconf-keystore-34, 1 March 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
keystore-34>.
[I-D.ietf-netconf-trust-anchors]
Watsen, K., "A YANG Data Model for a Truststore", Work in
Progress, Internet-Draft, draft-ietf-netconf-trust-
anchors-27, 1 March 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
trust-anchors-27>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997, DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>. <https://www.rfc-editor.org/info/rfc2119>.
[RFC4250] Lehtinen, S. and C. Lonvick, Ed., "The Secure Shell (SSH)
Protocol Assigned Numbers", RFC 4250,
DOI 10.17487/RFC4250, January 2006,
<https://www.rfc-editor.org/info/rfc4250>.
[RFC4251] Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH) [RFC4251] Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH)
Protocol Architecture", RFC 4251, DOI 10.17487/RFC4251, Protocol Architecture", RFC 4251, DOI 10.17487/RFC4251,
January 2006, <https://www.rfc-editor.org/info/rfc4251>. January 2006, <https://www.rfc-editor.org/info/rfc4251>.
[RFC4252] Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH) [RFC4252] Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH)
Authentication Protocol", RFC 4252, DOI 10.17487/RFC4252, Authentication Protocol", RFC 4252, DOI 10.17487/RFC4252,
January 2006, <https://www.rfc-editor.org/info/rfc4252>. January 2006, <https://www.rfc-editor.org/info/rfc4252>.
[RFC4253] Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH) [RFC4253] Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH)
Transport Layer Protocol", RFC 4253, DOI 10.17487/RFC4253, Transport Layer Protocol", RFC 4253, DOI 10.17487/RFC4253,
January 2006, <https://www.rfc-editor.org/info/rfc4253>. January 2006, <https://www.rfc-editor.org/info/rfc4253>.
[RFC4254] Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH) [RFC4254] Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH)
Connection Protocol", RFC 4254, DOI 10.17487/RFC4254, Connection Protocol", RFC 4254, DOI 10.17487/RFC4254,
January 2006, <https://www.rfc-editor.org/info/rfc4254>. January 2006, <https://www.rfc-editor.org/info/rfc4254>.
[RFC4344] Bellare, M., Kohno, T., and C. Namprempre, "The Secure
Shell (SSH) Transport Layer Encryption Modes", RFC 4344,
DOI 10.17487/RFC4344, January 2006,
<https://www.rfc-editor.org/info/rfc4344>.
[RFC4419] Friedl, M., Provos, N., and W. Simpson, "Diffie-Hellman
Group Exchange for the Secure Shell (SSH) Transport Layer
Protocol", RFC 4419, DOI 10.17487/RFC4419, March 2006,
<https://www.rfc-editor.org/info/rfc4419>.
[RFC4432] Harris, B., "RSA Key Exchange for the Secure Shell (SSH)
Transport Layer Protocol", RFC 4432, DOI 10.17487/RFC4432,
March 2006, <https://www.rfc-editor.org/info/rfc4432>.
[RFC4462] Hutzelman, J., Salowey, J., Galbraith, J., and V. Welch,
"Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the Secure
Shell (SSH) Protocol", RFC 4462, DOI 10.17487/RFC4462, May
2006, <https://www.rfc-editor.org/info/rfc4462>.
[RFC5647] Igoe, K. and J. Solinas, "AES Galois Counter Mode for the
Secure Shell Transport Layer Protocol", RFC 5647,
DOI 10.17487/RFC5647, August 2009,
<https://www.rfc-editor.org/info/rfc5647>.
[RFC5656] Stebila, D. and J. Green, "Elliptic Curve Algorithm
Integration in the Secure Shell Transport Layer",
RFC 5656, DOI 10.17487/RFC5656, December 2009,
<https://www.rfc-editor.org/info/rfc5656>.
[RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for [RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for
the Network Configuration Protocol (NETCONF)", RFC 6020, the Network Configuration Protocol (NETCONF)", RFC 6020,
DOI 10.17487/RFC6020, October 2010, DOI 10.17487/RFC6020, October 2010,
<https://www.rfc-editor.org/info/rfc6020>. <https://www.rfc-editor.org/info/rfc6020>.
[RFC6187] Igoe, K. and D. Stebila, "X.509v3 Certificates for Secure [RFC6187] Igoe, K. and D. Stebila, "X.509v3 Certificates for Secure
Shell Authentication", RFC 6187, DOI 10.17487/RFC6187, Shell Authentication", RFC 6187, DOI 10.17487/RFC6187,
March 2011, <https://www.rfc-editor.org/info/rfc6187>. March 2011, <https://www.rfc-editor.org/info/rfc6187>.
[RFC6668] Bider, D. and M. Baushke, "SHA-2 Data Integrity [RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
Verification for the Secure Shell (SSH) Transport Layer and A. Bierman, Ed., "Network Configuration Protocol
Protocol", RFC 6668, DOI 10.17487/RFC6668, July 2012, (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
<https://www.rfc-editor.org/info/rfc6668>. <https://www.rfc-editor.org/info/rfc6241>.
[RFC6242] Wasserman, M., "Using the NETCONF Protocol over Secure
Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011,
<https://www.rfc-editor.org/info/rfc6242>.
[RFC6991] Schoenwaelder, J., Ed., "Common YANG Data Types",
RFC 6991, DOI 10.17487/RFC6991, July 2013,
<https://www.rfc-editor.org/info/rfc6991>.
[RFC7317] Bierman, A. and M. Bjorklund, "A YANG Data Model for [RFC7317] Bierman, A. and M. Bjorklund, "A YANG Data Model for
System Management", RFC 7317, DOI 10.17487/RFC7317, August System Management", RFC 7317, DOI 10.17487/RFC7317, August
2014, <https://www.rfc-editor.org/info/rfc7317>. 2014, <https://www.rfc-editor.org/info/rfc7317>.
[RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language", [RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
RFC 7950, DOI 10.17487/RFC7950, August 2016, RFC 7950, DOI 10.17487/RFC7950, August 2016,
<https://www.rfc-editor.org/info/rfc7950>. <https://www.rfc-editor.org/info/rfc7950>.
[RFC8040] Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
<https://www.rfc-editor.org/info/rfc8040>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>. May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8268] Baushke, M., "More Modular Exponentiation (MODP) Diffie-
Hellman (DH) Key Exchange (KEX) Groups for Secure Shell
(SSH)", RFC 8268, DOI 10.17487/RFC8268, December 2017,
<https://www.rfc-editor.org/info/rfc8268>.
[RFC8308] Bider, D., "Extension Negotiation in the Secure Shell
(SSH) Protocol", RFC 8308, DOI 10.17487/RFC8308, March
2018, <https://www.rfc-editor.org/info/rfc8308>.
[RFC8332] Bider, D., "Use of RSA Keys with SHA-256 and SHA-512 in
the Secure Shell (SSH) Protocol", RFC 8332,
DOI 10.17487/RFC8332, March 2018,
<https://www.rfc-editor.org/info/rfc8332>.
[RFC8341] Bierman, A. and M. Bjorklund, "Network Configuration [RFC8341] Bierman, A. and M. Bjorklund, "Network Configuration
Access Control Model", STD 91, RFC 8341, Access Control Model", STD 91, RFC 8341,
DOI 10.17487/RFC8341, March 2018, DOI 10.17487/RFC8341, March 2018,
<https://www.rfc-editor.org/info/rfc8341>. <https://www.rfc-editor.org/info/rfc8341>.
[RFC8709] Harris, B. and L. Velvindron, "Ed25519 and Ed448 Public [RFC8446] Rescorla, E., "The Transport Layer Security (TLS) Protocol
Key Algorithms for the Secure Shell (SSH) Protocol", Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
RFC 8709, DOI 10.17487/RFC8709, February 2020, <https://www.rfc-editor.org/info/rfc8446>.
<https://www.rfc-editor.org/info/rfc8709>.
[RFC8731] Adamantiadis, A., Josefsson, S., and M. Baushke, "Secure [RFC9000] Iyengar, J., Ed. and M. Thomson, Ed., "QUIC: A UDP-Based
Shell (SSH) Key Exchange Method Using Curve25519 and Multiplexed and Secure Transport", RFC 9000,
Curve448", RFC 8731, DOI 10.17487/RFC8731, February 2020, DOI 10.17487/RFC9000, May 2021,
<https://www.rfc-editor.org/info/rfc8731>. <https://www.rfc-editor.org/info/rfc9000>.
[RFC8732] Sorce, S. and H. Kario, "Generic Security Service [RFC9640] Watsen, K., "YANG Data Types and Groupings for
Application Program Interface (GSS-API) Key Exchange with Cryptography", RFC 9640, DOI 10.17487/RFC9640, September
SHA-2", RFC 8732, DOI 10.17487/RFC8732, February 2020, 2024, <https://www.rfc-editor.org/info/rfc9640>.
<https://www.rfc-editor.org/info/rfc8732>.
[RFC8758] Velvindron, L., "Deprecating RC4 in Secure Shell (SSH)", [RFC9641] Watsen, K., "A YANG Data Model for a Truststore",
BCP 227, RFC 8758, DOI 10.17487/RFC8758, April 2020, RFC 9641, DOI 10.17487/RFC9641, September 2024,
<https://www.rfc-editor.org/info/rfc8758>. <https://www.rfc-editor.org/info/rfc9641>.
[RFC9642] Watsen, K., "A YANG Data Model for a Keystore", RFC 9642,
DOI 10.17487/RFC9642, September 2024,
<https://www.rfc-editor.org/info/rfc9642>.
7.2. Informative References 7.2. Informative References
[FIPS_186-6] [FIPS_186-5]
(NIST), T. N. I. F. S. A. T., "Digital Signature Standard NIST, "Digital Signature Standard (DSS)", FIPS PUB 186-5,
(DSS)", DOI 10.6028/NIST.FIPS.186-5, February 2023,
<https://csrc.nist.gov/publications/detail/fips/186/5/ <https://csrc.nist.gov/pubs/fips/186-5/final>.
draft>.
[I-D.ietf-netconf-http-client-server] [HTTP-CLIENT-SERVER]
Watsen, K., "YANG Groupings for HTTP Clients and HTTP Watsen, K., "YANG Groupings for HTTP Clients and HTTP
Servers", Work in Progress, Internet-Draft, draft-ietf- Servers", Work in Progress, Internet-Draft, draft-ietf-
netconf-http-client-server-19, 1 March 2024, netconf-http-client-server-23, 15 August 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
http-client-server-19>.
[I-D.ietf-netconf-netconf-client-server]
Watsen, K., "NETCONF Client and Server Models", Work in
Progress, Internet-Draft, draft-ietf-netconf-netconf-
client-server-35, 1 March 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
netconf-client-server-35>.
[I-D.ietf-netconf-restconf-client-server]
Watsen, K., "RESTCONF Client and Server Models", Work in
Progress, Internet-Draft, draft-ietf-netconf-restconf-
client-server-35, 1 March 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
restconf-client-server-35>.
[I-D.ietf-netconf-ssh-client-server]
Watsen, K., "YANG Groupings for SSH Clients and SSH
Servers", Work in Progress, Internet-Draft, draft-ietf-
netconf-ssh-client-server-39, 1 March 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
ssh-client-server-39>.
[I-D.ietf-netconf-tcp-client-server]
Watsen, K. and M. Scharf, "YANG Groupings for TCP Clients
and TCP Servers", Work in Progress, Internet-Draft, draft-
ietf-netconf-tcp-client-server-23, 1 March 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
tcp-client-server-23>.
[I-D.ietf-netconf-tls-client-server]
Watsen, K., "YANG Groupings for TLS Clients and TLS
Servers", Work in Progress, Internet-Draft, draft-ietf-
netconf-tls-client-server-40, 1 March 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netconf- <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
tls-client-server-40>. http-client-server-23>.
[I-D.ietf-netmod-rfc8407bis]
Bierman, A., Boucadair, M., and Q. Wu, "Guidelines for
Authors and Reviewers of Documents Containing YANG Data
Models", Work in Progress, Internet-Draft, draft-ietf-
netmod-rfc8407bis-09, 28 February 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netmod-
rfc8407bis-09>.
[I-D.ietf-netmod-system-config]
Ma, Q., Wu, Q., and C. Feng, "System-defined
Configuration", Work in Progress, Internet-Draft, draft-
ietf-netmod-system-config-05, 21 February 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netmod-
system-config-05>.
[IANA-ENC-ALGS] [IANA-ENC-ALGS]
(IANA), I. A. N. A., "IANA "Encryption Algorithm Names" IANA, "Encryption Algorithm Names",
Sub-registry of the "Secure Shell (SSH) Protocol <https://www.iana.org/assignments/ssh-parameters/>.
Parameters" Registry", <https://www.iana.org/assignments/
ssh-parameters/ssh-parameters.xhtml#ssh-parameters-17>.
[IANA-KEYEX-ALGS] [IANA-KEYEX-ALGS]
(IANA), I. A. N. A., "IANA "Key Exchange Method Names" IANA, "Key Exchange Method Names",
Sub-registry of the "Secure Shell (SSH) Protocol <https://www.iana.org/assignments/ssh-parameters>.
Parameters" Registry", <https://www.iana.org/assignments/
ssh-parameters/ssh-parameters.xhtml#ssh-parameters-16>.
[IANA-MAC-ALGS] [IANA-MAC-ALGS]
(IANA), I. A. N. A., "IANA "MAC Algorithm Names" Sub- IANA, "MAC Algorithm Names",
registry of the "Secure Shell (SSH) Protocol Parameters" <https://www.iana.org/assignments/ssh-parameters>.
Registry", <https://www.iana.org/assignments/ssh-
parameters/ssh-parameters.xhtml#ssh-parameters-18>.
[IANA-PUBKEY-ALGS] [IANA-PUBKEY-ALGS]
(IANA), I. A. N. A., "IANA "Public Key Algorithm Names" IANA, "Public Key Algorithm Names",
Sub-registry of the "Secure Shell (SSH) Protocol <https://www.iana.org/assignments/ssh-parameters/>.
Parameters" Registry", <https://www.iana.org/assignments/
ssh-parameters/ssh-parameters.xhtml#ssh-parameters-19>.
[IANA-YANG-PARAMETERS] [IANA-YANG-PARAMETERS]
"YANG Parameters", n.d., IANA, "YANG Parameters",
<https://www.iana.org/assignments/yang-parameters>. <https://www.iana.org/assignments/yang-parameters>.
[NETCONF-CLIENT-SERVER]
Watsen, K., "NETCONF Client and Server Models", Work in
Progress, Internet-Draft, draft-ietf-netconf-netconf-
client-server-37, 14 August 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
netconf-client-server-37>.
[RESTCONF-CLIENT-SERVER]
Watsen, K., "RESTCONF Client and Server Models", Work in
Progress, Internet-Draft, draft-ietf-netconf-restconf-
client-server-38, 14 August 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
restconf-client-server-38>.
[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, [RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
DOI 10.17487/RFC3688, January 2004, DOI 10.17487/RFC3688, January 2004,
<https://www.rfc-editor.org/info/rfc3688>. <https://www.rfc-editor.org/info/rfc3688>.
[RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
and A. Bierman, Ed., "Network Configuration Protocol
(NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
<https://www.rfc-editor.org/info/rfc6241>.
[RFC6242] Wasserman, M., "Using the NETCONF Protocol over Secure
Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011,
<https://www.rfc-editor.org/info/rfc6242>.
[RFC8040] Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
<https://www.rfc-editor.org/info/rfc8040>.
[RFC8071] Watsen, K., "NETCONF Call Home and RESTCONF Call Home", [RFC8071] Watsen, K., "NETCONF Call Home and RESTCONF Call Home",
RFC 8071, DOI 10.17487/RFC8071, February 2017, RFC 8071, DOI 10.17487/RFC8071, February 2017,
<https://www.rfc-editor.org/info/rfc8071>. <https://www.rfc-editor.org/info/rfc8071>.
[RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
Interchange Format", STD 90, RFC 8259,
DOI 10.17487/RFC8259, December 2017,
<https://www.rfc-editor.org/info/rfc8259>.
[RFC8340] Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams", [RFC8340] Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams",
BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018, BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018,
<https://www.rfc-editor.org/info/rfc8340>. <https://www.rfc-editor.org/info/rfc8340>.
[RFC8342] Bjorklund, M., Schoenwaelder, J., Shafer, P., Watsen, K., [RFC8342] Bjorklund, M., Schoenwaelder, J., Shafer, P., Watsen, K.,
and R. Wilton, "Network Management Datastore Architecture and R. Wilton, "Network Management Datastore Architecture
(NMDA)", RFC 8342, DOI 10.17487/RFC8342, March 2018, (NMDA)", RFC 8342, DOI 10.17487/RFC8342, March 2018,
<https://www.rfc-editor.org/info/rfc8342>. <https://www.rfc-editor.org/info/rfc8342>.
[RFC8407] Bierman, A., "Guidelines for Authors and Reviewers of [RFC8407] Bierman, A., "Guidelines for Authors and Reviewers of
Documents Containing YANG Data Models", BCP 216, RFC 8407, Documents Containing YANG Data Models", BCP 216, RFC 8407,
DOI 10.17487/RFC8407, October 2018, DOI 10.17487/RFC8407, October 2018,
<https://www.rfc-editor.org/info/rfc8407>. <https://www.rfc-editor.org/info/rfc8407>.
[RFC8792] Watsen, K., Auerswald, E., Farrel, A., and Q. Wu,
"Handling Long Lines in Content of Internet-Drafts and
RFCs", RFC 8792, DOI 10.17487/RFC8792, June 2020,
<https://www.rfc-editor.org/info/rfc8792>.
[RFC9643] Watsen, K. and M. Scharf, "YANG Groupings for TCP Clients
and TCP Servers", RFC 9643, DOI 10.17487/RFC9643,
September 2024, <https://www.rfc-editor.org/info/rfc9643>.
[RFC9645] Watsen, K., "YANG Groupings for TLS Clients and TLS
Servers", RFC 9645, DOI 10.17487/RFC9645, September 2024,
<https://www.rfc-editor.org/info/rfc9645>.
[SYSTEM-CONFIG]
Ma, Q., Wu, Q., and C. Feng, "System-defined
Configuration", Work in Progress, Internet-Draft, draft-
ietf-netmod-system-config-08, 18 June 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netmod-
system-config-08>.
[W3C.REC-xml-20081126]
Bray, T., Paoli, J., Sperberg-McQueen, C.M., Maler, E.,
and F. Yergeau, "Extensible Markup Language (XML) 1.0
(Fifth Edition)", World Wide Web Consortium
Recommendation REC-xml-20081126, November 2008,
<https://www.w3.org/TR/2008/REC-xml-20081126/>.
[YANG-GUIDE]
Bierman, A., Boucadair, M., and Q. Wu, "Guidelines for
Authors and Reviewers of Documents Containing YANG Data
Models", Work in Progress, Internet-Draft, draft-ietf-
netmod-rfc8407bis-15, 10 September 2024,
<https://datatracker.ietf.org/doc/html/draft-ietf-netmod-
rfc8407bis-15>.
Appendix A. Script to Generate IANA-Maintained YANG Modules Appendix A. Script to Generate IANA-Maintained YANG Modules
This section is not Normative. This section is not normative.
The Python https://www.python.org script contained in this section The Python <https://www.python.org> script contained in this section
will create the four IANA-maintained modules described in this will create the four IANA-maintained modules that are described (but
document. not contained) in this document.
Run the script using the command `python gen-yang-modules.py`, to Run the script using the command "python gen-yang-modules.py" to
produce four YANG module files in the current directory. produce four YANG module files in the current directory.
Be aware that the script does not attempt to copy the "revision" Be aware that the script does not attempt to copy the "revision"
statements from the previous/current YANG module. Copying the statements from the previous/current YANG module. Copying the
revision statements must be done manually. revision statements must be done manually.
<CODE BEGINS> <CODE BEGINS>
=============== NOTE: '\' line wrapping per RFC 8792 ================ =============== NOTE: '\' line wrapping per RFC 8792 ================
import re import re
skipping to change at page 74, line 26 skipping to change at line 3187
# Metadata for the four YANG modules produced by this script # Metadata for the four YANG modules produced by this script
MODULES = [ MODULES = [
{ {
"csv_url": "https://www.iana.org/assignments/ssh-parameters/\ "csv_url": "https://www.iana.org/assignments/ssh-parameters/\
ssh-parameters-17.csv", ssh-parameters-17.csv",
"spaced_name": "encryption", "spaced_name": "encryption",
"hypenated_name": "encryption", "hypenated_name": "encryption",
"prefix": "sshea", "prefix": "sshea",
"description": """ "This module defines enumerations for \ "description": """ "This module defines enumerations for \
the encryption algorithms the encryption algorithms
defined in the 'Encryption Algorithm Names' sub-registry of the defined in the 'Encryption Algorithm Names' registry of the
'Secure Shell (SSH) Protocol Parameters' registry maintained 'Secure Shell (SSH) Protocol Parameters' registry group
by IANA.""", maintained by IANA.""",
}, },
{ {
"csv_url": "https://www.iana.org/assignments/ssh-parameters/\ "csv_url": "https://www.iana.org/assignments/ssh-parameters/\
ssh-parameters-19.csv", ssh-parameters-19.csv",
"spaced_name": "public key", "spaced_name": "public key",
"hypenated_name": "public-key", "hypenated_name": "public-key",
"prefix": "sshpka", "prefix": "sshpka",
"description": """ "This module defines enumerations for \ "description": """ "This module defines enumerations for \
the public key algorithms the public key algorithms
defined in the 'Public Key Algorithm Names' sub-registry of the defined in the 'Public Key Algorithm Names' registry of the
'Secure Shell (SSH) Protocol Parameters' registry maintained 'Secure Shell (SSH) Protocol Parameters' registry group
by IANA.""" maintained by IANA."""
}, },
{ {
"csv_url": "https://www.iana.org/assignments/ssh-parameters/\ "csv_url": "https://www.iana.org/assignments/ssh-parameters/\
ssh-parameters-18.csv", ssh-parameters-18.csv",
"spaced_name": "mac", "spaced_name": "mac",
"hypenated_name": "mac", "hypenated_name": "mac",
"prefix": "sshma", "prefix": "sshma",
"description": """ "This module defines enumerations for \ "description": """ "This module defines enumerations for \
the MAC algorithms the MAC algorithms
defined in the 'MAC Algorithm Names' sub-registry of the defined in the 'MAC Algorithm Names' registry of the
'Secure Shell (SSH) Protocol Parameters' registry maintained 'Secure Shell (SSH) Protocol Parameters' registry group
by IANA.""" maintained by IANA."""
}, },
{ {
"csv_url": "https://www.iana.org/assignments/ssh-parameters/\ "csv_url": "https://www.iana.org/assignments/ssh-parameters/\
ssh-parameters-16.csv", ssh-parameters-16.csv",
"spaced_name": "key exchange", "spaced_name": "key exchange",
"hypenated_name": "key-exchange", "hypenated_name": "key-exchange",
"prefix": "sshkea", "prefix": "sshkea",
"description": """ "This module defines enumerations for \ "description": """ "This module defines enumerations for \
the key exchange algorithms the key exchange algorithms
defined in the 'Key Exchange Method Names' sub-registry of the defined in the 'Key Exchange Method Names' registry of the
'Secure Shell (SSH) Protocol Parameters' registry maintained 'Secure Shell (SSH) Protocol Parameters' registry group
by IANA.""" maintained by IANA."""
}, },
] ]
def create_module_begin(module, f): def create_module_begin(module, f):
# Define template for all four modules # Define template for all four modules
PREAMBLE_TEMPLATE=""" PREAMBLE_TEMPLATE="""
module iana-ssh-HNAME-algs { module iana-ssh-HNAME-algs {
yang-version 1.1; yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:iana-ssh-HNAME-algs"; namespace "urn:ietf:params:xml:ns:yang:iana-ssh-HNAME-algs";
skipping to change at page 75, line 44 skipping to change at line 3253
12025 Waterfront Drive, Suite 300 12025 Waterfront Drive, Suite 300
Los Angeles, CA 90094-2536 Los Angeles, CA 90094-2536
United States of America United States of America
Tel: +1 310 301 5800 Tel: +1 310 301 5800
Email: iana@iana.org"; Email: iana@iana.org";
description description
DESCRIPTION DESCRIPTION
Copyright (c) YEAR IETF Trust and the persons identified as Copyright (c) YEAR IETF Trust and the persons identified as
authors of the code. All rights reserved. authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Revised subject to the license terms contained in, the Revised
BSD License set forth in Section 4.c of the IETF Trust's BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents Legal Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info). (https://trustee.ietf.org/license-info).
The initial version of this YANG module is part of RFC EEEE The initial version of this YANG module is part of RFC 9644
(https://www.rfc-editor.org/info/rfcEEEE); see the RFC (https://www.rfc-editor.org/info/rfc9644); see the RFC
itself for full legal notices. itself for full legal notices.
All versions of this module are published by IANA at All versions of this module are published by IANA at
https://www.iana.org/assignments/yang-parameters."; https://www.iana.org/assignments/yang-parameters.";
revision DATE { revision DATE {
description description
"This initial version of the module was created using "This initial version of the module was created using
the script defined in RFC EEEE to reflect the contents the script defined in RFC 9644 to reflect the contents
of the SNAME algorithms registry maintained by IANA."; of the SNAME algorithms registry maintained by IANA.";
reference reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers"; "RFC 9644: YANG Groupings for SSH Clients and SSH Servers";
} }
typedef ssh-HNAME-algorithm { typedef ssh-HNAME-algorithm {
type enumeration { type enumeration {
""" """
# Replacements # Replacements
rep = { rep = {
"DATE": datetime.today().strftime('%Y-%m-%d'), "DATE": datetime.today().strftime('%Y-%m-%d'),
"YEAR": datetime.today().strftime('%Y'), "YEAR": datetime.today().strftime('%Y'),
"SNAME": module["spaced_name"], "SNAME": module["spaced_name"],
skipping to change at page 79, line 48 skipping to change at line 3444
algorithms.";\n') algorithms.";\n')
f.write(" }\n") f.write(" }\n")
f.write('\n') f.write('\n')
f.write('}\n') f.write('}\n')
def create_module(module): def create_module(module):
# Install cache for 8x speedup # Install cache for 8x speedup
requests_cache.install_cache() requests_cache.install_cache()
# ascertain yang module's name # Ascertain YANG module's name
yang_module_name = "iana-ssh-" + module["hypenated_name"] + "-al\ yang_module_name = "iana-ssh-" + module["hypenated_name"] + "-al\
gs.yang" gs.yang"
# create yang module file
# Create YANG module file
with open(yang_module_name, "w") as f: with open(yang_module_name, "w") as f:
create_module_begin(module, f) create_module_begin(module, f)
create_module_body(module, f) create_module_body(module, f)
create_module_end(module, f) create_module_end(module, f)
def main(): def main():
for module in MODULES: for module in MODULES:
create_module(module) create_module(module)
if __name__ == "__main__": if __name__ == "__main__":
main() main()
<CODE ENDS> <CODE ENDS>
A.1. Initial Module for the "Encryption Algorithm Names" Registry
Following are the complete contents to the initial IANA-maintained
YANG module. Please note that the date "2024-03-16" reflects the day
on which the extraction occurred. Applications SHOULD use the IANA-
maintained module, not the module defined in this draft.
This YANG module has normative references to [FIPS 46-3], [RFC4253],
[RFC4344], [RFC5647], and [RFC8758].
<CODE BEGINS> file "iana-ssh-encryption-algs@2024-03-16.yang"
module iana-ssh-encryption-algs {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:iana-ssh-encryption-algs";
prefix sshea;
organization
"Internet Assigned Numbers Authority (IANA)";
contact
"Postal: ICANN
12025 Waterfront Drive, Suite 300
Los Angeles, CA 90094-2536
United States of America
Tel: +1 310 301 5800
Email: iana@iana.org";
description
"This module defines enumerations for the encryption algorithms
defined in the 'Encryption Algorithm Names' sub-registry of the
'Secure Shell (SSH) Protocol Parameters' registry maintained
by IANA.
Copyright (c) 2024 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Revised
BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info).
The initial version of this YANG module is part of RFC EEEE
(https://www.rfc-editor.org/info/rfcEEEE); see the RFC
itself for full legal notices.
All versions of this module are published by IANA at
https://www.iana.org/assignments/yang-parameters.";
revision 2024-03-16 {
description
"This initial version of the module was created using
the script defined in RFC EEEE to reflect the contents
of the encryption algorithms registry maintained by IANA.";
reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers";
}
typedef ssh-encryption-algorithm {
type enumeration {
enum 3des-cbc {
description
"Enumeration for the '3des-cbc' algorithm. Section 6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum blowfish-cbc {
description
"Enumeration for the 'blowfish-cbc' algorithm. Section
6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum twofish256-cbc {
description
"Enumeration for the 'twofish256-cbc' algorithm. Section
6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum twofish-cbc {
description
"Enumeration for the 'twofish-cbc' algorithm. Section 6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum twofish192-cbc {
description
"Enumeration for the 'twofish192-cbc' algorithm. Section
6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum twofish128-cbc {
description
"Enumeration for the 'twofish128-cbc' algorithm. Section
6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum aes256-cbc {
description
"Enumeration for the 'aes256-cbc' algorithm. Section 6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum aes192-cbc {
description
"Enumeration for the 'aes192-cbc' algorithm. Section 6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum aes128-cbc {
description
"Enumeration for the 'aes128-cbc' algorithm. Section 6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum serpent256-cbc {
description
"Enumeration for the 'serpent256-cbc' algorithm. Section
6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum serpent192-cbc {
description
"Enumeration for the 'serpent192-cbc' algorithm. Section
6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum serpent128-cbc {
description
"Enumeration for the 'serpent128-cbc' algorithm. Section
6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum arcfour {
status obsolete;
description
"Enumeration for the 'arcfour' algorithm.";
reference
"RFC 8758:
Deprecating RC4 in Secure Shell (SSH)";
}
enum idea-cbc {
description
"Enumeration for the 'idea-cbc' algorithm. Section 6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum cast128-cbc {
description
"Enumeration for the 'cast128-cbc' algorithm. Section 6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum none {
description
"Enumeration for the 'none' algorithm. Section 6.3";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum des-cbc {
status obsolete;
description
"Enumeration for the 'des-cbc' algorithm.";
reference
"FIPS-46-3:
Data Encryption Standard (DES)";
}
enum arcfour128 {
status obsolete;
description
"Enumeration for the 'arcfour128' algorithm.";
reference
"RFC 8758:
Deprecating RC4 in Secure Shell (SSH)";
}
enum arcfour256 {
status obsolete;
description
"Enumeration for the 'arcfour256' algorithm.";
reference
"RFC 8758:
Deprecating RC4 in Secure Shell (SSH)";
}
enum aes128-ctr {
description
"Enumeration for the 'aes128-ctr' algorithm.";
reference
"RFC 4344:
The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
enum aes192-ctr {
description
"Enumeration for the 'aes192-ctr' algorithm.";
reference
"RFC 4344:
The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
enum aes256-ctr {
description
"Enumeration for the 'aes256-ctr' algorithm.";
reference
"RFC 4344:
The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
enum 3des-ctr {
description
"Enumeration for the '3des-ctr' algorithm.";
reference
"RFC 4344:
The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
enum blowfish-ctr {
description
"Enumeration for the 'blowfish-ctr' algorithm.";
reference
"RFC 4344:
The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
enum twofish128-ctr {
description
"Enumeration for the 'twofish128-ctr' algorithm.";
reference
"RFC 4344:
The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
enum twofish192-ctr {
description
"Enumeration for the 'twofish192-ctr' algorithm.";
reference
"RFC 4344:
The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
enum twofish256-ctr {
description
"Enumeration for the 'twofish256-ctr' algorithm.";
reference
"RFC 4344:
The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
enum serpent128-ctr {
description
"Enumeration for the 'serpent128-ctr' algorithm.";
reference
"RFC 4344:
The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
enum serpent192-ctr {
description
"Enumeration for the 'serpent192-ctr' algorithm.";
reference
"RFC 4344:
The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
enum serpent256-ctr {
description
"Enumeration for the 'serpent256-ctr' algorithm.";
reference
"RFC 4344:
The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
enum idea-ctr {
description
"Enumeration for the 'idea-ctr' algorithm.";
reference
"RFC 4344:
The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
enum cast128-ctr {
description
"Enumeration for the 'cast128-ctr' algorithm.";
reference
"RFC 4344:
The Secure Shell (SSH) Transport Layer Encryption
Modes";
}
enum AEAD_AES_128_GCM {
description
"Enumeration for the 'AEAD_AES_128_GCM' algorithm. Section
6.1";
reference
"RFC 5647:
AES Galois Counter Mode for the Secure Shell Transport
Layer Protocol";
}
enum AEAD_AES_256_GCM {
description
"Enumeration for the 'AEAD_AES_256_GCM' algorithm. Section
6.2";
reference
"RFC 5647:
AES Galois Counter Mode for the Secure Shell Transport
Layer Protocol";
}
}
description
"An enumeration for SSH encryption algorithms.";
}
}
<CODE ENDS>
A.2. Initial Module for the "MAC Algorithm Names" Registry
Following are the complete contents to the initial IANA-maintained
YANG module. Please note that the date "2024-03-16" reflects the day
on which the extraction occurred. Applications SHOULD use the IANA-
maintained module, not the module defined in this draft.
This YANG module has normative references [RFC4253], [RFC5647], and
[RFC6668].
<CODE BEGINS> file "iana-ssh-mac-algs@2024-03-16.yang"
module iana-ssh-mac-algs {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:iana-ssh-mac-algs";
prefix sshma;
organization
"Internet Assigned Numbers Authority (IANA)";
contact
"Postal: ICANN
12025 Waterfront Drive, Suite 300
Los Angeles, CA 90094-2536
United States of America
Tel: +1 310 301 5800
Email: iana@iana.org";
description
"This module defines enumerations for the MAC algorithms
defined in the 'MAC Algorithm Names' sub-registry of the
'Secure Shell (SSH) Protocol Parameters' registry maintained
by IANA.
Copyright (c) 2024 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Revised
BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info).
The initial version of this YANG module is part of RFC EEEE
(https://www.rfc-editor.org/info/rfcEEEE); see the RFC
itself for full legal notices.
All versions of this module are published by IANA at
https://www.iana.org/assignments/yang-parameters.";
revision 2024-03-16 {
description
"This initial version of the module was created using
the script defined in RFC EEEE to reflect the contents
of the mac algorithms registry maintained by IANA.";
reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers";
}
typedef ssh-mac-algorithm {
type enumeration {
enum hmac-sha1 {
description
"Enumeration for the 'hmac-sha1' algorithm. Section 6.4";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum hmac-sha1-96 {
description
"Enumeration for the 'hmac-sha1-96' algorithm. Section
6.4";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum hmac-md5 {
description
"Enumeration for the 'hmac-md5' algorithm. Section 6.4";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum hmac-md5-96 {
description
"Enumeration for the 'hmac-md5-96' algorithm. Section 6.4";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum none {
description
"Enumeration for the 'none' algorithm. Section 6.4";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum AEAD_AES_128_GCM {
description
"Enumeration for the 'AEAD_AES_128_GCM' algorithm. Section
6.1";
reference
"RFC 5647:
AES Galois Counter Mode for the Secure Shell Transport
Layer Protocol";
}
enum AEAD_AES_256_GCM {
description
"Enumeration for the 'AEAD_AES_256_GCM' algorithm. Section
6.2";
reference
"RFC 5647:
AES Galois Counter Mode for the Secure Shell Transport
Layer Protocol";
}
enum hmac-sha2-256 {
description
"Enumeration for the 'hmac-sha2-256' algorithm. Section 2";
reference
"RFC 6668:
SHA-2 Data Integrity Verification for the Secure Shell
(SSH) Transport Layer Protocol";
}
enum hmac-sha2-512 {
description
"Enumeration for the 'hmac-sha2-512' algorithm. Section 2";
reference
"RFC 6668:
SHA-2 Data Integrity Verification for the Secure Shell
(SSH) Transport Layer Protocol";
}
}
description
"An enumeration for SSH mac algorithms.";
}
}
<CODE ENDS>
A.3. Initial Module for the "Public Key Algorithm Names" Registry
Following are the complete contents to the initial IANA-maintained
YANG module. Please note that the date "2024-03-16" reflects the day
on which the extraction occurred. Applications SHOULD use the IANA-
maintained module, not the module defined in this draft.
This YANG module has normative references [RFC4253], [RFC4462],
[RFC5656], [RFC6187], [RFC8332], and [RFC8709].
<CODE BEGINS> file "iana-ssh-public-key-algs@2024-03-16.yang"
module iana-ssh-public-key-algs {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:iana-ssh-public-key-algs";
prefix sshpka;
organization
"Internet Assigned Numbers Authority (IANA)";
contact
"Postal: ICANN
12025 Waterfront Drive, Suite 300
Los Angeles, CA 90094-2536
United States of America
Tel: +1 310 301 5800
Email: iana@iana.org";
description
"This module defines enumerations for the public key algorithms
defined in the 'Public Key Algorithm Names' sub-registry of the
'Secure Shell (SSH) Protocol Parameters' registry maintained
by IANA.
Copyright (c) 2024 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Revised
BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info).
The initial version of this YANG module is part of RFC EEEE
(https://www.rfc-editor.org/info/rfcEEEE); see the RFC
itself for full legal notices.
All versions of this module are published by IANA at
https://www.iana.org/assignments/yang-parameters.";
revision 2024-03-16 {
description
"This initial version of the module was created using
the script defined in RFC EEEE to reflect the contents
of the public key algorithms registry maintained by IANA.";
reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers";
}
typedef ssh-public-key-algorithm {
type enumeration {
enum ssh-dss {
description
"Enumeration for the 'ssh-dss' algorithm. Section 6.6";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum ssh-rsa {
description
"Enumeration for the 'ssh-rsa' algorithm. Section 6.6";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum rsa-sha2-256 {
description
"Enumeration for the 'rsa-sha2-256' algorithm. Section 3";
reference
"RFC 8332:
Use of RSA Keys with SHA-256 and SHA-512 in the Secure
Shell (SSH) Protocol";
}
enum rsa-sha2-512 {
description
"Enumeration for the 'rsa-sha2-512' algorithm. Section 3";
reference
"RFC 8332:
Use of RSA Keys with SHA-256 and SHA-512 in the Secure
Shell (SSH) Protocol";
}
enum spki-sign-rsa {
description
"Enumeration for the 'spki-sign-rsa' algorithm. Section
6.6";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum spki-sign-dss {
description
"Enumeration for the 'spki-sign-dss' algorithm. Section
6.6";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum pgp-sign-rsa {
description
"Enumeration for the 'pgp-sign-rsa' algorithm. Section
6.6";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum pgp-sign-dss {
description
"Enumeration for the 'pgp-sign-dss' algorithm. Section
6.6";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum null {
description
"Enumeration for the 'null' algorithm. Section 5";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol";
}
enum ecdsa-sha2-nistp256 {
description
"Enumeration for the 'ecdsa-sha2-nistp256' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdsa-sha2-nistp384 {
description
"Enumeration for the 'ecdsa-sha2-nistp384' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdsa-sha2-nistp521 {
description
"Enumeration for the 'ecdsa-sha2-nistp521' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdsa-sha2-1.3.132.0.1 {
description
"Enumeration for the 'ecdsa-sha2-1.3.132.0.1' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdsa-sha2-1.2.840.10045.3.1.1 {
description
"Enumeration for the 'ecdsa-sha2-1.2.840.10045.3.1.1'
algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdsa-sha2-1.3.132.0.33 {
description
"Enumeration for the 'ecdsa-sha2-1.3.132.0.33' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdsa-sha2-1.3.132.0.26 {
description
"Enumeration for the 'ecdsa-sha2-1.3.132.0.26' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdsa-sha2-1.3.132.0.27 {
description
"Enumeration for the 'ecdsa-sha2-1.3.132.0.27' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdsa-sha2-1.3.132.0.16 {
description
"Enumeration for the 'ecdsa-sha2-1.3.132.0.16' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdsa-sha2-1.3.132.0.36 {
description
"Enumeration for the 'ecdsa-sha2-1.3.132.0.36' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdsa-sha2-1.3.132.0.37 {
description
"Enumeration for the 'ecdsa-sha2-1.3.132.0.37' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdsa-sha2-1.3.132.0.38 {
description
"Enumeration for the 'ecdsa-sha2-1.3.132.0.38' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum x509v3-ssh-dss {
description
"Enumeration for the 'x509v3-ssh-dss' algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum x509v3-ssh-rsa {
description
"Enumeration for the 'x509v3-ssh-rsa' algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum x509v3-rsa2048-sha256 {
description
"Enumeration for the 'x509v3-rsa2048-sha256' algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum x509v3-ecdsa-sha2-nistp256 {
description
"Enumeration for the 'x509v3-ecdsa-sha2-nistp256'
algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum x509v3-ecdsa-sha2-nistp384 {
description
"Enumeration for the 'x509v3-ecdsa-sha2-nistp384'
algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum x509v3-ecdsa-sha2-nistp521 {
description
"Enumeration for the 'x509v3-ecdsa-sha2-nistp521'
algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum x509v3-ecdsa-sha2-1.3.132.0.1 {
description
"Enumeration for the 'x509v3-ecdsa-sha2-1.3.132.0.1'
algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum x509v3-ecdsa-sha2-1.2.840.10045.3.1.1 {
description
"Enumeration for the 'x509v3-ecdsa-
sha2-1.2.840.10045.3.1.1' algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum x509v3-ecdsa-sha2-1.3.132.0.33 {
description
"Enumeration for the 'x509v3-ecdsa-sha2-1.3.132.0.33'
algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum x509v3-ecdsa-sha2-1.3.132.0.26 {
description
"Enumeration for the 'x509v3-ecdsa-sha2-1.3.132.0.26'
algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum x509v3-ecdsa-sha2-1.3.132.0.27 {
description
"Enumeration for the 'x509v3-ecdsa-sha2-1.3.132.0.27'
algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum x509v3-ecdsa-sha2-1.3.132.0.16 {
description
"Enumeration for the 'x509v3-ecdsa-sha2-1.3.132.0.16'
algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum x509v3-ecdsa-sha2-1.3.132.0.36 {
description
"Enumeration for the 'x509v3-ecdsa-sha2-1.3.132.0.36'
algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum x509v3-ecdsa-sha2-1.3.132.0.37 {
description
"Enumeration for the 'x509v3-ecdsa-sha2-1.3.132.0.37'
algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum x509v3-ecdsa-sha2-1.3.132.0.38 {
description
"Enumeration for the 'x509v3-ecdsa-sha2-1.3.132.0.38'
algorithm.";
reference
"RFC 6187:
X.509v3 Certificates for Secure Shell Authentication";
}
enum ssh-ed25519 {
description
"Enumeration for the 'ssh-ed25519' algorithm.";
reference
"RFC 8709:
Ed25519 and Ed448 Public Key Algorithms for the Secure
Shell (SSH) Protocol";
}
enum ssh-ed448 {
description
"Enumeration for the 'ssh-ed448' algorithm.";
reference
"RFC 8709:
Ed25519 and Ed448 Public Key Algorithms for the Secure
Shell (SSH) Protocol";
}
}
description
"An enumeration for SSH public key algorithms.";
}
}
<CODE ENDS>
A.4. Initial Module for the "Key Exchange Method Names" Registry
Following are the complete contents to the initial IANA-maintained
YANG module. Please note that the date "2024-03-16" reflects the day
on which the extraction occurred. Applications SHOULD use the IANA-
maintained module, not the module defined in this draft.
This YANG module has normative references to [RFC4419], [RFC4432],
[RFC5656], [RFC8268], [RFC8308], [RFC8731], [RFC8732].
<CODE BEGINS> file "iana-ssh-key-exchange-algs@2024-03-16.yang"
module iana-ssh-key-exchange-algs {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:iana-ssh-key-exchange-algs";
prefix sshkea;
organization
"Internet Assigned Numbers Authority (IANA)";
contact
"Postal: ICANN
12025 Waterfront Drive, Suite 300
Los Angeles, CA 90094-2536
United States of America
Tel: +1 310 301 5800
Email: iana@iana.org";
description
"This module defines enumerations for the key exchange algorithms
defined in the 'Key Exchange Method Names' sub-registry of the
'Secure Shell (SSH) Protocol Parameters' registry maintained
by IANA.
Copyright (c) 2024 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Revised
BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info).
The initial version of this YANG module is part of RFC EEEE
(https://www.rfc-editor.org/info/rfcEEEE); see the RFC
itself for full legal notices.
All versions of this module are published by IANA at
https://www.iana.org/assignments/yang-parameters.";
revision 2024-03-16 {
description
"This initial version of the module was created using
the script defined in RFC EEEE to reflect the contents
of the key exchange algorithms registry maintained by IANA.";
reference
"RFC EEEE: YANG Groupings for SSH Clients and SSH Servers";
}
typedef ssh-key-exchange-algorithm {
type enumeration {
enum diffie-hellman-group-exchange-sha1 {
status deprecated;
description
"Enumeration for the 'diffie-hellman-group-exchange-sha1'
algorithm. Section 4.1";
reference
"RFC 4419:
Diffie-Hellman Group Exchange for the Secure Shell
(SSH) Transport Layer Protocol
RFC 8270:
Increase the Secure Shell Minimum Recommended Diffie-
Hellman Modulus Size to 2048 Bits";
}
enum diffie-hellman-group-exchange-sha256 {
description
"Enumeration for the 'diffie-hellman-group-exchange-sha256'
algorithm. Section 4.2";
reference
"RFC 4419:
Diffie-Hellman Group Exchange for the Secure Shell
(SSH) Transport Layer Protocol
RFC 8270:
Increase the Secure Shell Minimum Recommended Diffie-
Hellman Modulus Size to 2048 Bits";
}
enum diffie-hellman-group1-sha1 {
status deprecated;
description
"Enumeration for the 'diffie-hellman-group1-sha1'
algorithm. Section 8.1";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum diffie-hellman-group14-sha1 {
description
"Enumeration for the 'diffie-hellman-group14-sha1'
algorithm. Section 8.2";
reference
"RFC 4253:
The Secure Shell (SSH) Transport Layer Protocol";
}
enum diffie-hellman-group14-sha256 {
description
"Enumeration for the 'diffie-hellman-group14-sha256'
algorithm.";
reference
"RFC 8268:
More Modular Exponentiation (MODP) Diffie-Hellman (DH)
Key Exchange (KEX) Groups for Secure Shell (SSH)";
}
enum diffie-hellman-group15-sha512 {
description
"Enumeration for the 'diffie-hellman-group15-sha512'
algorithm.";
reference
"RFC 8268:
More Modular Exponentiation (MODP) Diffie-Hellman (DH)
Key Exchange (KEX) Groups for Secure Shell (SSH)";
}
enum diffie-hellman-group16-sha512 {
description
"Enumeration for the 'diffie-hellman-group16-sha512'
algorithm.";
reference
"RFC 8268:
More Modular Exponentiation (MODP) Diffie-Hellman (DH)
Key Exchange (KEX) Groups for Secure Shell (SSH)";
}
enum diffie-hellman-group17-sha512 {
description
"Enumeration for the 'diffie-hellman-group17-sha512'
algorithm.";
reference
"RFC 8268:
More Modular Exponentiation (MODP) Diffie-Hellman (DH)
Key Exchange (KEX) Groups for Secure Shell (SSH)";
}
enum diffie-hellman-group18-sha512 {
description
"Enumeration for the 'diffie-hellman-group18-sha512'
algorithm.";
reference
"RFC 8268:
More Modular Exponentiation (MODP) Diffie-Hellman (DH)
Key Exchange (KEX) Groups for Secure Shell (SSH)";
}
enum ecdh-sha2-nistp256 {
description
"Enumeration for the 'ecdh-sha2-nistp256' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdh-sha2-nistp384 {
description
"Enumeration for the 'ecdh-sha2-nistp384' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdh-sha2-nistp521 {
description
"Enumeration for the 'ecdh-sha2-nistp521' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdh-sha2-1.3.132.0.1 {
description
"Enumeration for the 'ecdh-sha2-1.3.132.0.1' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdh-sha2-1.2.840.10045.3.1.1 {
description
"Enumeration for the 'ecdh-sha2-1.2.840.10045.3.1.1'
algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdh-sha2-1.3.132.0.33 {
description
"Enumeration for the 'ecdh-sha2-1.3.132.0.33' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdh-sha2-1.3.132.0.26 {
description
"Enumeration for the 'ecdh-sha2-1.3.132.0.26' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdh-sha2-1.3.132.0.27 {
description
"Enumeration for the 'ecdh-sha2-1.3.132.0.27' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdh-sha2-1.3.132.0.16 {
description
"Enumeration for the 'ecdh-sha2-1.3.132.0.16' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdh-sha2-1.3.132.0.36 {
description
"Enumeration for the 'ecdh-sha2-1.3.132.0.36' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdh-sha2-1.3.132.0.37 {
description
"Enumeration for the 'ecdh-sha2-1.3.132.0.37' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecdh-sha2-1.3.132.0.38 {
description
"Enumeration for the 'ecdh-sha2-1.3.132.0.38' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum ecmqv-sha2 {
description
"Enumeration for the 'ecmqv-sha2' algorithm.";
reference
"RFC 5656:
Elliptic Curve Algorithm Integration in the Secure
Shell Transport Layer";
}
enum gss-group1-sha1-nistp256 {
status deprecated;
description
"Enumeration for the 'gss-group1-sha1-nistp256'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group1-sha1-nistp384 {
status deprecated;
description
"Enumeration for the 'gss-group1-sha1-nistp384'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group1-sha1-nistp521 {
status deprecated;
description
"Enumeration for the 'gss-group1-sha1-nistp521'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group1-sha1-1.3.132.0.1 {
status deprecated;
description
"Enumeration for the 'gss-group1-sha1-1.3.132.0.1'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group1-sha1-1.2.840.10045.3.1.1 {
status deprecated;
description
"Enumeration for the 'gss-group1-sha1-1.2.840.10045.3.1.1'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group1-sha1-1.3.132.0.33 {
status deprecated;
description
"Enumeration for the 'gss-group1-sha1-1.3.132.0.33'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group1-sha1-1.3.132.0.26 {
status deprecated;
description
"Enumeration for the 'gss-group1-sha1-1.3.132.0.26'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group1-sha1-1.3.132.0.27 {
status deprecated;
description
"Enumeration for the 'gss-group1-sha1-1.3.132.0.27'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group1-sha1-1.3.132.0.16 {
status deprecated;
description
"Enumeration for the 'gss-group1-sha1-1.3.132.0.16'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group1-sha1-1.3.132.0.36 {
status deprecated;
description
"Enumeration for the 'gss-group1-sha1-1.3.132.0.36'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group1-sha1-1.3.132.0.37 {
status deprecated;
description
"Enumeration for the 'gss-group1-sha1-1.3.132.0.37'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group1-sha1-1.3.132.0.38 {
status deprecated;
description
"Enumeration for the 'gss-group1-sha1-1.3.132.0.38'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha1-nistp256 {
status deprecated;
description
"Enumeration for the 'gss-group14-sha1-nistp256'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha1-nistp384 {
status deprecated;
description
"Enumeration for the 'gss-group14-sha1-nistp384'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha1-nistp521 {
status deprecated;
description
"Enumeration for the 'gss-group14-sha1-nistp521'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha1-1.3.132.0.1 {
status deprecated;
description
"Enumeration for the 'gss-group14-sha1-1.3.132.0.1'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha1-1.2.840.10045.3.1.1 {
status deprecated;
description
"Enumeration for the 'gss-group14-sha1-1.2.840.10045.3.1.1'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha1-1.3.132.0.33 {
status deprecated;
description
"Enumeration for the 'gss-group14-sha1-1.3.132.0.33'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha1-1.3.132.0.26 {
status deprecated;
description
"Enumeration for the 'gss-group14-sha1-1.3.132.0.26'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha1-1.3.132.0.27 {
status deprecated;
description
"Enumeration for the 'gss-group14-sha1-1.3.132.0.27'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha1-1.3.132.0.16 {
status deprecated;
description
"Enumeration for the 'gss-group14-sha1-1.3.132.0.16'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha1-1.3.132.0.36 {
status deprecated;
description
"Enumeration for the 'gss-group14-sha1-1.3.132.0.36'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha1-1.3.132.0.37 {
status deprecated;
description
"Enumeration for the 'gss-group14-sha1-1.3.132.0.37'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha1-1.3.132.0.38 {
status deprecated;
description
"Enumeration for the 'gss-group14-sha1-1.3.132.0.38'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-gex-sha1-nistp256 {
status deprecated;
description
"Enumeration for the 'gss-gex-sha1-nistp256' algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-gex-sha1-nistp384 {
status deprecated;
description
"Enumeration for the 'gss-gex-sha1-nistp384' algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-gex-sha1-nistp521 {
status deprecated;
description
"Enumeration for the 'gss-gex-sha1-nistp521' algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-gex-sha1-1.3.132.0.1 {
status deprecated;
description
"Enumeration for the 'gss-gex-sha1-1.3.132.0.1'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-gex-sha1-1.2.840.10045.3.1.1 {
status deprecated;
description
"Enumeration for the 'gss-gex-sha1-1.2.840.10045.3.1.1'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-gex-sha1-1.3.132.0.33 {
status deprecated;
description
"Enumeration for the 'gss-gex-sha1-1.3.132.0.33'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-gex-sha1-1.3.132.0.26 {
status deprecated;
description
"Enumeration for the 'gss-gex-sha1-1.3.132.0.26'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-gex-sha1-1.3.132.0.27 {
status deprecated;
description
"Enumeration for the 'gss-gex-sha1-1.3.132.0.27'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-gex-sha1-1.3.132.0.16 {
status deprecated;
description
"Enumeration for the 'gss-gex-sha1-1.3.132.0.16'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-gex-sha1-1.3.132.0.36 {
status deprecated;
description
"Enumeration for the 'gss-gex-sha1-1.3.132.0.36'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-gex-sha1-1.3.132.0.37 {
status deprecated;
description
"Enumeration for the 'gss-gex-sha1-1.3.132.0.37'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-gex-sha1-1.3.132.0.38 {
status deprecated;
description
"Enumeration for the 'gss-gex-sha1-1.3.132.0.38'
algorithm.";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol
RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss- {
description
"Enumeration for the 'gss-' algorithm. Section 2.6";
reference
"RFC 4462:
Generic Security Service Application Program Interface
(GSS-API) Authentication and Key Exchange for the
Secure Shell (SSH) Protocol";
}
enum rsa1024-sha1 {
status obsolete;
description
"Enumeration for the 'rsa1024-sha1' algorithm.";
reference
"RFC 4432:
RSA Key Exchange for the Secure Shell (SSH) Transport
Layer Protocol";
}
enum rsa2048-sha256 {
description
"Enumeration for the 'rsa2048-sha256' algorithm.";
reference
"RFC 4432:
RSA Key Exchange for the Secure Shell (SSH) Transport
Layer Protocol";
}
enum ext-info-s {
description
"Enumeration for the 'ext-info-s' algorithm. Section 2";
reference
"RFC 8308:
Extension Negotiation in the Secure Shell (SSH)
Protocol";
}
enum ext-info-c {
description
"Enumeration for the 'ext-info-c' algorithm. Section 2";
reference
"RFC 8308:
Extension Negotiation in the Secure Shell (SSH)
Protocol";
}
enum gss-group14-sha256-nistp256 {
description
"Enumeration for the 'gss-group14-sha256-nistp256'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha256-nistp384 {
description
"Enumeration for the 'gss-group14-sha256-nistp384'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha256-nistp521 {
description
"Enumeration for the 'gss-group14-sha256-nistp521'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha256-1.3.132.0.1 {
description
"Enumeration for the 'gss-group14-sha256-1.3.132.0.1'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha256-1.2.840.10045.3.1.1 {
description
"Enumeration for the 'gss-
group14-sha256-1.2.840.10045.3.1.1' algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha256-1.3.132.0.33 {
description
"Enumeration for the 'gss-group14-sha256-1.3.132.0.33'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha256-1.3.132.0.26 {
description
"Enumeration for the 'gss-group14-sha256-1.3.132.0.26'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha256-1.3.132.0.27 {
description
"Enumeration for the 'gss-group14-sha256-1.3.132.0.27'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha256-1.3.132.0.16 {
description
"Enumeration for the 'gss-group14-sha256-1.3.132.0.16'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha256-1.3.132.0.36 {
description
"Enumeration for the 'gss-group14-sha256-1.3.132.0.36'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha256-1.3.132.0.37 {
description
"Enumeration for the 'gss-group14-sha256-1.3.132.0.37'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group14-sha256-1.3.132.0.38 {
description
"Enumeration for the 'gss-group14-sha256-1.3.132.0.38'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group15-sha512-nistp256 {
description
"Enumeration for the 'gss-group15-sha512-nistp256'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group15-sha512-nistp384 {
description
"Enumeration for the 'gss-group15-sha512-nistp384'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group15-sha512-nistp521 {
description
"Enumeration for the 'gss-group15-sha512-nistp521'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group15-sha512-1.3.132.0.1 {
description
"Enumeration for the 'gss-group15-sha512-1.3.132.0.1'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group15-sha512-1.2.840.10045.3.1.1 {
description
"Enumeration for the 'gss-
group15-sha512-1.2.840.10045.3.1.1' algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group15-sha512-1.3.132.0.33 {
description
"Enumeration for the 'gss-group15-sha512-1.3.132.0.33'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group15-sha512-1.3.132.0.26 {
description
"Enumeration for the 'gss-group15-sha512-1.3.132.0.26'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group15-sha512-1.3.132.0.27 {
description
"Enumeration for the 'gss-group15-sha512-1.3.132.0.27'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group15-sha512-1.3.132.0.16 {
description
"Enumeration for the 'gss-group15-sha512-1.3.132.0.16'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group15-sha512-1.3.132.0.36 {
description
"Enumeration for the 'gss-group15-sha512-1.3.132.0.36'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group15-sha512-1.3.132.0.37 {
description
"Enumeration for the 'gss-group15-sha512-1.3.132.0.37'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group15-sha512-1.3.132.0.38 {
description
"Enumeration for the 'gss-group15-sha512-1.3.132.0.38'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group16-sha512-nistp256 {
description
"Enumeration for the 'gss-group16-sha512-nistp256'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group16-sha512-nistp384 {
description
"Enumeration for the 'gss-group16-sha512-nistp384'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group16-sha512-nistp521 {
description
"Enumeration for the 'gss-group16-sha512-nistp521'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group16-sha512-1.3.132.0.1 {
description
"Enumeration for the 'gss-group16-sha512-1.3.132.0.1'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group16-sha512-1.2.840.10045.3.1.1 {
description
"Enumeration for the 'gss-
group16-sha512-1.2.840.10045.3.1.1' algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group16-sha512-1.3.132.0.33 {
description
"Enumeration for the 'gss-group16-sha512-1.3.132.0.33'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group16-sha512-1.3.132.0.26 {
description
"Enumeration for the 'gss-group16-sha512-1.3.132.0.26'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group16-sha512-1.3.132.0.27 {
description
"Enumeration for the 'gss-group16-sha512-1.3.132.0.27'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group16-sha512-1.3.132.0.16 {
description
"Enumeration for the 'gss-group16-sha512-1.3.132.0.16'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group16-sha512-1.3.132.0.36 {
description
"Enumeration for the 'gss-group16-sha512-1.3.132.0.36'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group16-sha512-1.3.132.0.37 {
description
"Enumeration for the 'gss-group16-sha512-1.3.132.0.37'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group16-sha512-1.3.132.0.38 {
description
"Enumeration for the 'gss-group16-sha512-1.3.132.0.38'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group17-sha512-nistp256 {
description
"Enumeration for the 'gss-group17-sha512-nistp256'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group17-sha512-nistp384 {
description
"Enumeration for the 'gss-group17-sha512-nistp384'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group17-sha512-nistp521 {
description
"Enumeration for the 'gss-group17-sha512-nistp521'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group17-sha512-1.3.132.0.1 {
description
"Enumeration for the 'gss-group17-sha512-1.3.132.0.1'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group17-sha512-1.2.840.10045.3.1.1 {
description
"Enumeration for the 'gss-
group17-sha512-1.2.840.10045.3.1.1' algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group17-sha512-1.3.132.0.33 {
description
"Enumeration for the 'gss-group17-sha512-1.3.132.0.33'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group17-sha512-1.3.132.0.26 {
description
"Enumeration for the 'gss-group17-sha512-1.3.132.0.26'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group17-sha512-1.3.132.0.27 {
description
"Enumeration for the 'gss-group17-sha512-1.3.132.0.27'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group17-sha512-1.3.132.0.16 {
description
"Enumeration for the 'gss-group17-sha512-1.3.132.0.16'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group17-sha512-1.3.132.0.36 {
description
"Enumeration for the 'gss-group17-sha512-1.3.132.0.36'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group17-sha512-1.3.132.0.37 {
description
"Enumeration for the 'gss-group17-sha512-1.3.132.0.37'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group17-sha512-1.3.132.0.38 {
description
"Enumeration for the 'gss-group17-sha512-1.3.132.0.38'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group18-sha512-nistp256 {
description
"Enumeration for the 'gss-group18-sha512-nistp256'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group18-sha512-nistp384 {
description
"Enumeration for the 'gss-group18-sha512-nistp384'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group18-sha512-nistp521 {
description
"Enumeration for the 'gss-group18-sha512-nistp521'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group18-sha512-1.3.132.0.1 {
description
"Enumeration for the 'gss-group18-sha512-1.3.132.0.1'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group18-sha512-1.2.840.10045.3.1.1 {
description
"Enumeration for the 'gss-
group18-sha512-1.2.840.10045.3.1.1' algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group18-sha512-1.3.132.0.33 {
description
"Enumeration for the 'gss-group18-sha512-1.3.132.0.33'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group18-sha512-1.3.132.0.26 {
description
"Enumeration for the 'gss-group18-sha512-1.3.132.0.26'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group18-sha512-1.3.132.0.27 {
description
"Enumeration for the 'gss-group18-sha512-1.3.132.0.27'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group18-sha512-1.3.132.0.16 {
description
"Enumeration for the 'gss-group18-sha512-1.3.132.0.16'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group18-sha512-1.3.132.0.36 {
description
"Enumeration for the 'gss-group18-sha512-1.3.132.0.36'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group18-sha512-1.3.132.0.37 {
description
"Enumeration for the 'gss-group18-sha512-1.3.132.0.37'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-group18-sha512-1.3.132.0.38 {
description
"Enumeration for the 'gss-group18-sha512-1.3.132.0.38'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp256-sha256-nistp256 {
description
"Enumeration for the 'gss-nistp256-sha256-nistp256'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp256-sha256-nistp384 {
description
"Enumeration for the 'gss-nistp256-sha256-nistp384'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp256-sha256-nistp521 {
description
"Enumeration for the 'gss-nistp256-sha256-nistp521'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp256-sha256-1.3.132.0.1 {
description
"Enumeration for the 'gss-nistp256-sha256-1.3.132.0.1'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp256-sha256-1.2.840.10045.3.1.1 {
description
"Enumeration for the 'gss-
nistp256-sha256-1.2.840.10045.3.1.1' algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp256-sha256-1.3.132.0.33 {
description
"Enumeration for the 'gss-nistp256-sha256-1.3.132.0.33'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp256-sha256-1.3.132.0.26 {
description
"Enumeration for the 'gss-nistp256-sha256-1.3.132.0.26'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp256-sha256-1.3.132.0.27 {
description
"Enumeration for the 'gss-nistp256-sha256-1.3.132.0.27'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp256-sha256-1.3.132.0.16 {
description
"Enumeration for the 'gss-nistp256-sha256-1.3.132.0.16'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp256-sha256-1.3.132.0.36 {
description
"Enumeration for the 'gss-nistp256-sha256-1.3.132.0.36'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp256-sha256-1.3.132.0.37 {
description
"Enumeration for the 'gss-nistp256-sha256-1.3.132.0.37'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp256-sha256-1.3.132.0.38 {
description
"Enumeration for the 'gss-nistp256-sha256-1.3.132.0.38'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp384-sha384-nistp256 {
description
"Enumeration for the 'gss-nistp384-sha384-nistp256'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp384-sha384-nistp384 {
description
"Enumeration for the 'gss-nistp384-sha384-nistp384'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp384-sha384-nistp521 {
description
"Enumeration for the 'gss-nistp384-sha384-nistp521'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp384-sha384-1.3.132.0.1 {
description
"Enumeration for the 'gss-nistp384-sha384-1.3.132.0.1'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp384-sha384-1.2.840.10045.3.1.1 {
description
"Enumeration for the 'gss-
nistp384-sha384-1.2.840.10045.3.1.1' algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp384-sha384-1.3.132.0.33 {
description
"Enumeration for the 'gss-nistp384-sha384-1.3.132.0.33'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp384-sha384-1.3.132.0.26 {
description
"Enumeration for the 'gss-nistp384-sha384-1.3.132.0.26'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp384-sha384-1.3.132.0.27 {
description
"Enumeration for the 'gss-nistp384-sha384-1.3.132.0.27'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp384-sha384-1.3.132.0.16 {
description
"Enumeration for the 'gss-nistp384-sha384-1.3.132.0.16'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp384-sha384-1.3.132.0.36 {
description
"Enumeration for the 'gss-nistp384-sha384-1.3.132.0.36'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp384-sha384-1.3.132.0.37 {
description
"Enumeration for the 'gss-nistp384-sha384-1.3.132.0.37'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp384-sha384-1.3.132.0.38 {
description
"Enumeration for the 'gss-nistp384-sha384-1.3.132.0.38'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp521-sha512-nistp256 {
description
"Enumeration for the 'gss-nistp521-sha512-nistp256'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp521-sha512-nistp384 {
description
"Enumeration for the 'gss-nistp521-sha512-nistp384'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp521-sha512-nistp521 {
description
"Enumeration for the 'gss-nistp521-sha512-nistp521'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp521-sha512-1.3.132.0.1 {
description
"Enumeration for the 'gss-nistp521-sha512-1.3.132.0.1'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp521-sha512-1.2.840.10045.3.1.1 {
description
"Enumeration for the 'gss-
nistp521-sha512-1.2.840.10045.3.1.1' algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp521-sha512-1.3.132.0.33 {
description
"Enumeration for the 'gss-nistp521-sha512-1.3.132.0.33'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp521-sha512-1.3.132.0.26 {
description
"Enumeration for the 'gss-nistp521-sha512-1.3.132.0.26'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp521-sha512-1.3.132.0.27 {
description
"Enumeration for the 'gss-nistp521-sha512-1.3.132.0.27'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp521-sha512-1.3.132.0.16 {
description
"Enumeration for the 'gss-nistp521-sha512-1.3.132.0.16'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp521-sha512-1.3.132.0.36 {
description
"Enumeration for the 'gss-nistp521-sha512-1.3.132.0.36'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp521-sha512-1.3.132.0.37 {
description
"Enumeration for the 'gss-nistp521-sha512-1.3.132.0.37'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-nistp521-sha512-1.3.132.0.38 {
description
"Enumeration for the 'gss-nistp521-sha512-1.3.132.0.38'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve25519-sha256-nistp256 {
description
"Enumeration for the 'gss-curve25519-sha256-nistp256'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve25519-sha256-nistp384 {
description
"Enumeration for the 'gss-curve25519-sha256-nistp384'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve25519-sha256-nistp521 {
description
"Enumeration for the 'gss-curve25519-sha256-nistp521'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve25519-sha256-1.3.132.0.1 {
description
"Enumeration for the 'gss-curve25519-sha256-1.3.132.0.1'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve25519-sha256-1.2.840.10045.3.1.1 {
description
"Enumeration for the 'gss-
curve25519-sha256-1.2.840.10045.3.1.1' algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve25519-sha256-1.3.132.0.33 {
description
"Enumeration for the 'gss-curve25519-sha256-1.3.132.0.33'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve25519-sha256-1.3.132.0.26 {
description
"Enumeration for the 'gss-curve25519-sha256-1.3.132.0.26'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve25519-sha256-1.3.132.0.27 {
description
"Enumeration for the 'gss-curve25519-sha256-1.3.132.0.27'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve25519-sha256-1.3.132.0.16 {
description
"Enumeration for the 'gss-curve25519-sha256-1.3.132.0.16'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve25519-sha256-1.3.132.0.36 {
description
"Enumeration for the 'gss-curve25519-sha256-1.3.132.0.36'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve25519-sha256-1.3.132.0.37 {
description
"Enumeration for the 'gss-curve25519-sha256-1.3.132.0.37'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve25519-sha256-1.3.132.0.38 {
description
"Enumeration for the 'gss-curve25519-sha256-1.3.132.0.38'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve448-sha512-nistp256 {
description
"Enumeration for the 'gss-curve448-sha512-nistp256'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve448-sha512-nistp384 {
description
"Enumeration for the 'gss-curve448-sha512-nistp384'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve448-sha512-nistp521 {
description
"Enumeration for the 'gss-curve448-sha512-nistp521'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve448-sha512-1.3.132.0.1 {
description
"Enumeration for the 'gss-curve448-sha512-1.3.132.0.1'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve448-sha512-1.2.840.10045.3.1.1 {
description
"Enumeration for the 'gss-
curve448-sha512-1.2.840.10045.3.1.1' algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve448-sha512-1.3.132.0.33 {
description
"Enumeration for the 'gss-curve448-sha512-1.3.132.0.33'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve448-sha512-1.3.132.0.26 {
description
"Enumeration for the 'gss-curve448-sha512-1.3.132.0.26'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve448-sha512-1.3.132.0.27 {
description
"Enumeration for the 'gss-curve448-sha512-1.3.132.0.27'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve448-sha512-1.3.132.0.16 {
description
"Enumeration for the 'gss-curve448-sha512-1.3.132.0.16'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve448-sha512-1.3.132.0.36 {
description
"Enumeration for the 'gss-curve448-sha512-1.3.132.0.36'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve448-sha512-1.3.132.0.37 {
description
"Enumeration for the 'gss-curve448-sha512-1.3.132.0.37'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum gss-curve448-sha512-1.3.132.0.38 {
description
"Enumeration for the 'gss-curve448-sha512-1.3.132.0.38'
algorithm.";
reference
"RFC 8732:
Generic Security Service Application Program Interface
(GSS-API) Key Exchange with SHA-2";
}
enum curve25519-sha256 {
description
"Enumeration for the 'curve25519-sha256' algorithm.";
reference
"RFC 8731:
Secure Shell (SSH) Key Exchange Method Using
Curve25519 and Curve448";
}
enum curve448-sha512 {
description
"Enumeration for the 'curve448-sha512' algorithm.";
reference
"RFC 8731:
Secure Shell (SSH) Key Exchange Method Using
Curve25519 and Curve448";
}
}
description
"An enumeration for SSH key exchange algorithms.";
}
}
<CODE ENDS>
Appendix B. Change Log
B.1. 00 to 01
* Noted that '0.0.0.0' and '::' might have special meanings.
* Renamed "keychain" to "keystore".
B.2. 01 to 02
* Removed the groupings 'listening-ssh-client-grouping' and
'listening-ssh-server-grouping'. Now modules only contain the
transport-independent groupings.
* Simplified the "client-auth" part in the ietf-ssh-client module.
It now inlines what it used to point to keystore for.
* Added cipher suites for various algorithms into new 'ietf-ssh-
common' module.
B.3. 02 to 03
* Removed 'RESTRICTED' enum from 'password' leaf type.
* Added a 'must' statement to container 'server-auth' asserting that
at least one of the various auth mechanisms must be specified.
* Fixed description statement for leaf 'trusted-ca-certs'.
B.4. 03 to 04
* Change title to "YANG Groupings for SSH Clients and SSH Servers"
* Added reference to RFC 6668
* Added RFC 8174 to Requirements Language Section.
* Enhanced description statement for ietf-ssh-server's "trusted-ca-
certs" leaf.
* Added mandatory true to ietf-ssh-client's "client-auth" 'choice'
statement.
* Changed the YANG prefix for module ietf-ssh-common from 'sshcom'
to 'sshcmn'.
* Removed the compression algorithms as they are not commonly
configurable in vendors' implementations.
* Updating descriptions in transport-params-grouping and the
servers's usage of it.
* Now tree diagrams reference ietf-netmod-yang-tree-diagrams
* Updated YANG to use typedefs around leafrefs to common keystore
paths
* Now inlines key and certificates (no longer a leafref to keystore)
B.5. 04 to 05
* Merged changes from co-author.
B.6. 05 to 06
* Updated to use trust anchors from trust-anchors draft (was
keystore draft)
* Now uses new keystore grouping enabling asymmetric key to be
either locally defined or a reference to the keystore.
B.7. 06 to 07
* factored the ssh-[client|server]-groupings into more reusable
groupings.
* added if-feature statements for the new "ssh-host-keys" and
"x509-certificates" features defined in draft-ietf-netconf-trust-
anchors.
B.8. 07 to 08
* Added a number of compatibility matrices to Section 5 (thanks
Frank!)
* Clarified that any configured "host-key-alg" values need to be
compatible with the configured private key.
B.9. 08 to 09
* Updated examples to reflect update to groupings defined in the
keystore -09 draft.
* Add SSH keepalives features and groupings.
* Prefixed top-level SSH grouping nodes with 'ssh-' and support
mashups.
* Updated copyright date, boilerplate template, affiliation, and
folding algorithm.
B.10. 09 to 10
* Reformatted the YANG modules.
B.11. 10 to 11
* Reformatted lines causing folding to occur.
B.12. 11 to 12
* Collapsed all the inner groupings into the top-level grouping.
* Added a top-level "demux container" inside the top-level grouping.
* Added NACM statements and updated the Security Considerations
section.
* Added "presence" statements on the "keepalive" containers, as was
needed to address a validation error that appeared after adding
the "must" statements into the NETCONF/RESTCONF client/server
modules.
* Updated the boilerplate text in module-level "description"
statement to match copyeditor convention.
B.13. 12 to 13
* Removed the "demux containers", floating the nacm:default-deny-
write to each descendant node, and adding a note to model
designers regarding the potential need to add their own demux
containers.
* Fixed a couple references (section 2 --> section 3)
* In the server model, replaced <client-cert-auth> with <client-
authentication> and introduced 'inline-or-external' choice.
B.14. 13 to 14
* Updated to reflect changes in trust-anchors drafts (e.g., s/trust-
anchors/truststore/g + s/pinned.//)
B.15. 14 to 15
* Updated examples to reflect ietf-crypto-types change (e.g.,
identities --> enumerations)
* Updated "server-authentication" and "client-authentication" nodes
from being a leaf of type "ts:host-keys-ref" or "ts:certificates-
ref" to a container that uses "ts:inline-or-truststore-host-keys-
grouping" or "ts:inline-or-truststore-certs-grouping".
B.16. 15 to 16
* Removed unnecessary if-feature statements in the -client and
-server modules.
* Cleaned up some description statements in the -client and -server
modules.
* Fixed a canonical ordering issue in ietf-ssh-common detected by
new pyang.
B.17. 16 to 17
* Removed choice inline-or-external by removing the 'external' case
and flattening the 'local' case and adding a "local-users-
supported" feature.
* Updated examples to include the "*-key-format" nodes.
* Augmented-in "must" expressions ensuring that locally-defined
public-key-format are "ct:ssh-public-key-format" (must expr for
ref'ed keys are TBD).
B.18. 17 to 18
* Removed leaf-list 'other' from ietf-ssh-server.
* Removed unused 'external-client-auth-supported' feature.
* Added features client-auth-password, client-auth-hostbased, and
client-auth-none.
* Renamed 'host-key' to 'public-key' for when refering to
'publickey' based auth.
* Added new feature-protected 'hostbased' and 'none' to the 'user'
node's config.
* Added new feature-protected 'hostbased' and 'none' to the 'client-
identity' node's config.
* Updated examples to reflect new "bag" addition to truststore.
* Refined truststore/keystore groupings to ensure the key formats
"must" be particular values.
* Switched to using truststore's new "public-key" bag (instead of
separate "ssh-public-key" and "raw-public-key" bags.
* Updated client/server examples to cover ALL cases (local/ref x
cert/raw-key/psk).
B.19. 18 to 19
* Updated the "keepalives" containers to address Michal Vasko's
request to align with RFC 8071.
* Removed algorithm-mapping tables from the "SSH Common Model"
section
* Removed 'algorithm' node from examples.
* Added feature "userauth-publickey"
* Removed "choice auth-type", as auth-types are not exclusive.
* Renamed both "client-certs" and "server-certs" to "ee-certs"
* Switch "must" to assert the public-key-format is "subject-public-
key-info-format" when certificates are used.
* Added a "Note to Reviewers" note to first page.
B.20. 19 to 20
* Added a "must 'public-key or password or hostbased or none or
certificate'" statement to the "user" node in ietf-ssh-client
* Expanded "Data Model Overview section(s) [remove "wall" of tree
diagrams].
* Moved the "ietf-ssh-common" module section to proceed the other
two module sections.
* Updated the Security Considerations section.
B.21. 20 to 21
* Updated examples to reflect new "cleartext-" prefix in the crypto-
types draft.
B.22. 21 to 22
* Cleaned up the SSH-client examples (i.e., removing FIXMEs)
* Fixed issues found by the SecDir review of the "keystore" draft.
* Updated the "ietf-ssh-client" module to use the new "password-
grouping" grouping from the "crypto-types" module.
B.23. 22 to 23
* Addressed comments raised by YANG Doctor in the ct/ts/ks drafts.
B.24. 23 to 24
* Removed the 'supported-authentication-methods' from {grouping ssh-
server-grouping}/client-authentication.
* Added XML-comment above examples explaining the reason for the
unexepected top-most element's presence.
* Added RFC-references to various 'feature' statements.
* Renamed "credentials" to "authentication methods"
* Renamed "client-auth-*" to "userauth-*"
* Renamed "client-identity-*" to "userauth-*"
* Fixed nits found by YANG Doctor reviews.
* Aligned modules with `pyang -f` formatting.
* Added a 'Contributors' section.
B.25. 24 to 25
* Moved algorithms in ietf-ssh-common (plus more) to IANA-maintained
modules
* Added "config false" lists for algorithms supported by the server.
* Renamed "{ietf-ssh-client}userauth-*" to "client-ident-*"
* Renamed "{ietf-ssh-server}userauth-*" to "local-user-auth-*"
* Fixed issues found during YANG Doctor review.
* Fixed issues found during Secdir review.
B.26. 25 to 26
* Replaced "base64encodedvalue==" with "BASE64VALUE=" in examples.
* Minor editorial nits
B.27. 26 to 27
* Fixed up the 'WG Web' and 'WG List' lines in YANG module(s)
* Fixed up copyright (i.e., s/Simplified/Revised/) in YANG module(s)
* Created identityref-based typedefs for each of the four IANA alg
identity bases.
* Added ietf-ssh-common:generate-asymmetric-key-pair() RPC for
discussion.
B.28. 27 to 28
* Fixed example to not have line-returns around "identity" values.
* Fixed examples to not include "xmlns:algs".
* Added an example for the "generate-asymmetric-key-pair" RPC.
B.29. 28 to 29
* Updated modules to IANA-maintained modules in Appendix A to
2022-06-16.
B.30. 29 to 30
* Fixed 'must' expressions.
* Added missing 'revision' statement.
B.31. 30 to 31
* Updated per Shepherd reviews impacting the suite of drafts.
B.32. 31 to 32
* Updated per Shepherd reviews impacting the suite of drafts.
B.33. 32 to 33
* Updated per Tom Petch review.
* Updated Intro to clarify what "generic" means.
* Added RPC-reply for 'generate-asymmetric-key-pair' example.
* Added references to RFC 4251 and FIPS 186-6.
* Added "if-feature ct:encrypted-private-keys" for "case cleartext".
B.34. 33 to 34
* Addresses AD review comments.
* Added note to Editor to fix line foldings.
* Introduction now more clearly identifies the "ietf-" and "iana-"
modules defined.
* Clarified that the modules, when implemented, do not define any
protocol-accessible nodes.
* Clarified that IANA may deprecate and/or obsolete identities over
time.
* Added Security Consideration for the "generate-asymmetric-key-
pair" RPC.
* Added Security Considerations text to also look a SC-section from
imported modules.
* Fixed private-key "must" expressions to not require public-key
nodes to be present.
* Renamed leaf from "bits" to "num-bits".
* Renamed leaf from "hide" to "hidden".
* Added container "private-key-encoding" to wrap existing choice.
* Removed "public-key-format" and "public-key" nodes from examples.
B.35. 34 to 35
* Addresses AD review by Rob Wilton.
B.36. 35 to 36
* Addresses 1st-round of IESG reviews.
B.37. 36 to 38
* Addresses issues found in OpsDir review of the ssh-client-server
draft.
* Replaced identities with enums in the IANA modules.
* Updated per Elwyn Davies' Gen-ART review.
* Updated Introduction to read more like the Abstract
* Add refs to where the 'operational' and 'system' datastores are
defined.
* Updated Editor-notes to NOT remove the script (just remove the
initial IANA modules)
* Renamed Security Considerations section s/Template for/
Considerations for/
* s/defines/presents/ in a few places.
* Renamed script from 'gen-identities.py' to 'gen-yang-modules.py'
* Removed the removeInRFC="true" attribute in Appendix sections
B.38. 38 to 39
* Address IESG review comments.
B.39. 39 to 40
* Updated to reflect comments from Paul Wouters.
* Fixed the "generate-asymmetric-key-pair" RPC to return the
location to where hidden keys are created.
Acknowledgements Acknowledgements
The authors would like to thank the following for lively discussions The authors would like to thank the following for lively discussions
on list and in the halls (ordered by first name): Alan Luchuk, Andy on list and in the halls (ordered by first name): Alan Luchuk, Andy
Bierman, Balázs Kovács, Barry Leiba, Benoit Claise, Bert Wijnen, Bierman, Balázs Kovács, Barry Leiba, Benoit Claise, Bert Wijnen,
David Lamparter, Elwyn Davies, Gary Wu, Jürgen Schönwälder, Ladislav David Lamparter, Elwyn Davies, Gary Wu, Jürgen Schönwälder, Ladislav
Lhotka, Liang Xia, Martin Björklund, Martin Thomson, Mehmet Ersue, Lhotka, Liang Xia, Martin Björklund, Martin Thomson, Mehmet Ersue,
Michal Vaško, Murray Kucherawy, Paul Wouters, Per Andersson, Phil Michal Vaško, Murray Kucherawy, Paul Wouters, Per Andersson, Phil
Shafer, Qin Wun, Radek Krejci, Rob Wilton, Roman Danyliw, Russ Shafer, Qin Wun, Radek Krejci, Rob Wilton, Roman Danyliw, Russ
Housley, Sean Turner, Tom Petch, Thomas Martin, and Warren Kumari. Housley, Sean Turner, Thomas Martin, Tom Petch, and Warren Kumari.
Contributors Contributors
Special acknowledgement goes to Gary Wu for his work on the "ietf- Special acknowledgement goes to Gary Wu for his work on the "ietf-
ssh-common" module. ssh-common" module.
Author's Address Author's Address
Kent Watsen Kent Watsen
Watsen Networks Watsen Networks
 End of changes. 337 change blocks. 
4408 lines changed or deleted 787 lines changed or added

This html diff was produced by rfcdiff 1.48.