Internet Engineering Task Force (IETF)                         K. Watsen
Request for Comments: 9641                               Watsen Networks
Category: Standards Track                                    August                                 September 2024
ISSN: 2070-1721

                   A YANG Data Model for a Truststore

Abstract

   This document presents a YANG module for configuring bags of
   certificates and bags of public keys that can be referenced by other
   data models for trust.  Notifications are sent when certificates are
   about to expire.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/rfc9641.

Copyright Notice

   Copyright (c) 2024 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Revised BSD License text as described in Section 4.e of the
   Trust Legal Provisions and are provided without warranty as described
   in the Revised BSD License.

Table of Contents

   1.  Introduction
     1.1.  Relation to Other RFCs
     1.2.  Specification Language
     1.3.  Adherence to the NMDA
     1.4.  Conventions
   2.  The "ietf-truststore" Module
     2.1.  Data Model Overview
     2.2.  Example Usage
     2.3.  YANG Module
   3.  Support for Built-In Trust Anchors
   4.  Security Considerations
     4.1.  Security of Data at Rest
     4.2.  Unconstrained Public Key Usage
     4.3.  Considerations for the "ietf-truststore" YANG Module
   5.  IANA Considerations
     5.1.  The IETF XML Registry
     5.2.  The YANG Module Names Registry
   6.  References
     6.1.  Normative References
     6.2.  Informative References
   Acknowledgements
   Author's Address

1.  Introduction

   This document presents a YANG 1.1 [RFC7950] module that has the
   following characteristics:

   *  Provide a central truststore for storing raw public keys and/or
      certificates.

   *  Provide support for storing named bags of raw public keys and/or
      named bags of certificates.

   *  Provide types that can be used to reference raw public keys or
      certificates stored in the central truststore.

   *  Provide groupings that enable raw public keys and certificates to
      be configured inline or as references to truststore instances.

   *  Enable the truststore to be instantiated in other data models, in
      addition to or in lieu of the central truststore instance.

1.1.  Relation to Other RFCs

   This document presents a YANG module [RFC7950] that is part of a
   collection of RFCs that work together to ultimately support the
   configuration of both the clients and servers of both the Network
   Configuration Protocol (NETCONF) [RFC6241] and RESTCONF [RFC8040].

   The dependency relationship between the primary YANG groupings
   defined in the various RFCs is presented in the below diagram.  In
   some cases, a document may define secondary groupings that introduce
   dependencies not illustrated in the diagram.  The labels in the
   diagram are shorthand names for the defining RFCs.  The citation
   references for shorthand names are provided below the diagram.

   Please note that the arrows in the diagram point from referencer to
   referenced.  For example, the "crypto-types" RFC does not have any
   dependencies, whilst the "keystore" RFC depends on the "crypto-types"
   RFC.

                                  crypto-types
                                    ^      ^
                                   /        \
                                  /          \
                         truststore         keystore
                          ^     ^             ^  ^
                          |     +---------+   |  |
                          |               |   |  |
                          |      +------------+  |
   tcp-client-server      |     /         |      |
      ^    ^        ssh-client-server     |      |
      |    |           ^            tls-client-server
      |    |           |              ^     ^        http-client-server
      |    |           |              |     |                 ^
      |    |           |        +-----+     +---------+       |
      |    |           |        |                     |       |
      |    +-----------|--------|--------------+      |       |
      |                |        |              |      |       |
      +-----------+    |        |              |      |       |
                  |    |        |              |      |       |
                  |    |        |              |      |       |
               netconf-client-server       restconf-client-server

   +========================+==========================+
   | Label in Diagram       | Reference                |
   +========================+==========================+
   | crypto-types           | [RFC9640]                |
   +------------------------+--------------------------+
   | truststore             | RFC 9641                 |
   +------------------------+--------------------------+
   | keystore               | [RFC9642]                |
   +------------------------+--------------------------+
   | tcp-client-server      | [RFC9643]                |
   +------------------------+--------------------------+
   | ssh-client-server      | [RFC9644]                |
   +------------------------+--------------------------+
   | tls-client-server      | [RFC9645]                |
   +------------------------+--------------------------+
   | http-client-server     | [HTTP-CLIENT-SERVER]     |
   +------------------------+--------------------------+
   | netconf-client-server  | [NETCONF-CLIENT-SERVER]  |
   +------------------------+--------------------------+
   | restconf-client-server | [RESTCONF-CLIENT-SERVER] |
   +------------------------+--------------------------+

          Table 1: Label in Diagram to RFC Mapping

1.2.  Specification Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

1.3.  Adherence to the NMDA

   This document is compliant with the Network Management Datastore
   Architecture (NMDA) [RFC8342].  For instance, trust anchors installed
   during manufacturing (e.g., for trusted, well-known services) are
   expected to appear in <operational> (see Section 3).

1.4.  Conventions

   Various examples in this document use "BASE64VALUE=" as a placeholder
   value for binary data that has been base64 encoded (see Section 4 9.8
   of
   [RFC4648]). [RFC7950]).  This placeholder value is used because real
   base64-encoded structures are often many lines long and hence
   distracting to the example being presented.

   Various examples in this document use the XML [W3C.REC-xml-20081126]
   encoding.  Other encodings, such as JSON [RFC8259], could
   alternatively be used.

   Various examples in this document contain long lines that may be
   folded, as described in [RFC8792].

   This document uses the adjective "central" with the word "truststore"
   to refer to the top-level instance of the "truststore-grouping"
   grouping when the "central-truststore-supported" feature is enabled.
   Please be aware that consuming YANG modules MAY instantiate the
   "truststore-grouping" grouping in other locations.  All such other
   instances are not the "central" instance.

2.  The "ietf-truststore" Module

   This section defines a YANG 1.1 [RFC7950] module called "ietf-
   truststore".  A high-level overview of the module is provided in
   Section 2.1.  Examples illustrating the module's use are provided in
   Section 2.2 ("Example Usage").  The YANG module itself is defined in
   Section 2.3.

2.1.  Data Model Overview

   This section provides an overview of the "ietf-truststore" module in
   terms of its features, typedefs, groupings, and protocol-accessible
   nodes.

2.1.1.  Features

   The following diagram lists all the "feature" statements defined in
   the "ietf-truststore" module:

   Features:
     +-- central-truststore-supported
     +-- inline-definitions-supported
     +-- certificates
     +-- public-keys

   The diagram above uses syntax that is similar to but not defined in
   [RFC8340].

2.1.2.  Typedefs

   The following diagram lists the "typedef" statements defined in the
   "ietf-truststore" module:

   Typedefs:
     leafref
       +-- central-certificate-bag-ref
       +-- central-certificate-ref
       +-- central-public-key-bag-ref
       +-- central-public-key-ref

   The diagram above uses syntax that is similar to but not defined in
   [RFC8340].

   Comments:

   *  All the typedefs defined in the "ietf-truststore" module extend
      the base "leafref" type defined in [RFC7950].

   *  The leafrefs refer to certificates, public keys, and bags in the
      central truststore when this module is implemented.

   *  These typedefs are provided to aid consuming modules that import
      the "ietf-truststore" module.

2.1.3.  Groupings

   The "ietf-truststore" module defines the following "grouping"
   statements:

   *  central-certificate-ref-grouping

   *  central-public-key-ref-grouping

   *  inline-or-truststore-certs-grouping

   *  inline-or-truststore-public-keys-grouping

   *  truststore-grouping

   Each of these groupings are presented in the following subsections.

2.1.3.1.  The "central-certificate-ref-grouping" Grouping

   The following tree diagram [RFC8340] illustrates the "central-
   certificate-ref-grouping" grouping:

     grouping central-certificate-ref-grouping:
       +-- certificate-bag?   ts:central-certificate-bag-ref
       |       {central-truststore-supported,certificates}?
       +-- certificate?       ts:central-certificate-ref
               {central-truststore-supported,certificates}?

   Comments:

   *  The "central-certificate-ref-grouping" grouping is provided solely
      as a convenience to consuming modules that wish to enable the
      configuration of a reference to a certificate in a certificate-bag
      in the truststore.

   *  The "certificate-bag" leaf uses the "central-certificate-bag-ref"
      typedef defined in Section 2.1.2.

   *  The "certificate" leaf uses the "central-certificate-ref" typedef
      defined in Section 2.1.2.

2.1.3.2.  The "central-public-key-ref-grouping" Grouping

   The following tree diagram [RFC8340] illustrates the "central-public-
   key-ref-grouping" grouping:

     grouping central-public-key-ref-grouping:
       +-- public-key-bag?   ts:central-public-key-bag-ref
       |       {central-truststore-supported,public-keys}?
       +-- public-key?       ts:central-public-key-ref
               {central-truststore-supported,public-keys}?

   Comments:

   *  The "central-public-key-ref-grouping" grouping is provided solely
      as a convenience to consuming modules that wish to enable the
      configuration of a reference to a public-key in a public-key-bag
      in the truststore.

   *  The "public-key-bag" leaf uses the "public-key-bag-ref" "central-public-key-bag-ref"
      typedef defined in Section 2.1.2.

   *  The "public-key" leaf uses the "public-key-ref" "central-public-key-ref" typedef
      defined in Section 2.1.2.

2.1.3.3.  The "inline-or-truststore-certs-grouping" Grouping

   The following tree diagram [RFC8340] illustrates the "inline-or-
   truststore-certs-grouping" grouping:

     grouping inline-or-truststore-certs-grouping:
       +-- (inline-or-truststore)
          +--:(inline) {inline-definitions-supported}?
          |  +-- inline-definition
          |     +-- certificate* [name]
          |        +-- name? name                             string
          |        +---u ct:trust-anchor-cert-grouping
          +--:(central-truststore)
                   {central-truststore-supported,certificates}?
             +-- central-truststore-reference?
                     ts:central-certificate-bag-ref

   Comments:

   *  The "inline-or-truststore-certs-grouping" grouping is provided
      solely as a convenience to consuming modules that wish to offer an
      option whether a bag of certificates can be defined inline or as a
      reference to a bag in the truststore.

   *  A "choice" statement is used to expose the various options.  Each
      option is enabled by a "feature" statement.  Additional "case"
      statements MAY be augmented in if, e.g., there is a need to
      reference a bag in an alternate location.

   *  For the "inline-definition" option, the "certificate" node uses
      the "trust-anchor-cert-grouping" grouping discussed in
      Section 2.1.4.8 of [RFC9640].

   *  For the "central-truststore" option, the "central-truststore-
      reference" node is an instance of the "certificate-bag-ref" "central-certificate-bag-
      ref" discussed in Section 2.1.2.

2.1.3.4.  The "inline-or-truststore-public-keys-grouping" Grouping

   The following tree diagram [RFC8340] illustrates the "inline-or-
   truststore-public-keys-grouping" grouping:

     grouping inline-or-truststore-public-keys-grouping:
       +-- (inline-or-truststore)
          +--:(inline) {inline-definitions-supported}?
          |  +-- inline-definition
          |     +-- public-key* [name]
          |        +-- name? name                      string
          |        +---u ct:public-key-grouping
          +--:(central-truststore)
                   {central-truststore-supported,public-keys}?
             +-- central-truststore-reference?
                     ts:central-public-key-bag-ref

   Comments:

   *  The "inline-or-truststore-public-keys-grouping" grouping is
      provided solely as a convenience to consuming modules that wish to
      offer an option whether a bag of public keys can be defined inline
      or as a reference to a bag in the truststore.

   *  A "choice" statement is used to expose the various options.  Each
      option is enabled by a "feature" statement.  Additional "case"
      statements MAY be augmented in if, e.g., there is a need to
      reference a bag in an alternate location.

   *  For the "inline-definition" option, the "public-key" node uses the
      "public-key-grouping" grouping discussed in Section 2.1.4.4 of
      [RFC9640].

   *  For the "central-truststore" option, the "central-truststore-
      reference" is an instance of the "certificate-bag-ref" discussed
      in Section 2.1.2.

2.1.3.5.  The "truststore-grouping" Grouping

   The following tree diagram [RFC8340] illustrates the "truststore-
   grouping" grouping:

     grouping truststore-grouping:
       +-- certificate-bags {certificates}?
       |  +-- certificate-bag* [name]
       |     +-- name? name           string
       |     +-- description?   string
       |     +-- certificate* [name]
       |        +-- name? name                             string
       |        +---u ct:trust-anchor-cert-grouping
       +-- public-key-bags {public-keys}?
          +-- public-key-bag* [name]
             +-- name? name           string
             +-- description?   string
             +-- public-key* [name]
                +-- name? name                      string
                +---u ct:public-key-grouping

   Comments:

   *  The "truststore-grouping" grouping defines a truststore instance
      as being composed of certificates and/or public keys, both of
      which are enabled by "feature" statements.  The structures
      supporting certificates and public keys are essentially the same,
      having an outer list of "bags" containing an inner list of objects
      (i.e., certificates or public keys).  The bags enable trust
      anchors serving a common purpose to be grouped and referenced
      together.

   *  For certificates, each certificate is defined by the "trust-
      anchor-cert-grouping" grouping (Section 2.1.4.8 of [RFC9640]).
      The "cert-data" node is a Cryptographic Message Syntax (CMS)
      structure that can be composed of a chain of one or more
      certificates.  Additionally, the "certificate-expiration"
      notification enables the server to alert clients when certificates
      are nearing expiration or have already expired.

   *  For public keys, each public key is defined by the "public-key-
      grouping" grouping (Section 2.1.4.4 of [RFC9640]).  The "public-
      key" node can be one of any number of structures specified by the
      "public-key-format" identity node.

2.1.4.  Protocol-Accessible Nodes

   The following tree diagram [RFC8340] lists all the protocol-
   accessible nodes defined in the "ietf-truststore" module without
   expanding the "grouping" statements:

   module: ietf-truststore
     +--rw truststore {central-truststore-supported}?
        +---u truststore-grouping

   The following tree diagram [RFC8340] lists all the protocol-
   accessible nodes defined in the "ietf-truststore" module with all
   "grouping" statements expanded, enabling the truststore's full
   structure to be seen:

   module: ietf-truststore
     +--rw truststore {central-truststore-supported}?
        +--rw certificate-bags {certificates}?
        |  +--rw certificate-bag* [name]
        |     +--rw name           string
        |     +--rw description?   string
        |     +--rw certificate* [name]
        |        +--rw name                      string
        |        +--rw cert-data                 trust-anchor-cert-cms
        |        +---n certificate-expiration
        |                {certificate-expiration-notification}?
        |           +-- expiration-date    yang:date-and-time
        +--rw public-key-bags {public-keys}?
           +--rw public-key-bag* [name]
              +--rw name           string
              +--rw description?   string
              +--rw public-key* [name]
                 +--rw name                 string
                 +--rw public-key-format    identityref
                 +--rw public-key           binary

   Comments:

   *  Protocol-accessible nodes are those nodes that are accessible when
      the module is "implemented", as described in Section 5.6.5 of
      [RFC7950].

   *  The protocol-accessible nodes for the "ietf-truststore" module are
      instances of the "truststore-grouping" grouping discussed in
      Section 2.1.3.5.

   *  The top-level "truststore" node is additionally constrained by the
      "central-truststore-supported" feature.

   *  The "truststore-grouping" grouping is discussed in
      Section 2.1.3.5.

   *  The reason for why the "truststore-grouping" grouping exists
      separate from the protocol-accessible nodes definition is to
      enable instances of the truststore to be instantiated in other
      locations, as may be needed or desired by some modules.

2.2.  Example Usage

   The examples in this section are encoded using XML, such as might be
   the case when using the NETCONF protocol.  Other encodings MAY be
   used, such as JSON when using the RESTCONF protocol.

2.2.1.  A Truststore Instance

   This section presents an example illustrating trust anchors in
   <intended>, as per Section 2.1.4.  Please see Section 3 for an
   example illustrating built-in values in <operational>.

   The example contained in this section defines eight bags of trust
   anchors.  There are four certificate-based bags and four public-key-
   based bags.  The following diagram provides an overview of the
   contents in the example:

   Certificate Bags
     +-- Trust anchor certs for authenticating a set of remote servers
     +-- End entity certs for authenticating a set of remote servers
     +-- Trust anchor certs for authenticating a set of remote clients
     +-- End entity certs for authenticating a set of remote clients

   Public Key Bags
     +-- SSH keys to authenticate a set of remote SSH servers
     +-- SSH keys to authenticate a set of remote SSH clients
     +-- Raw public keys to authenticate a set of remote SSH servers
     +-- Raw public keys to authenticate a set of remote SSH clients

   Following is the full example:

   =============== NOTE: '\' line wrapping per RFC 8792 ================

   <truststore
     xmlns="urn:ietf:params:xml:ns:yang:ietf-truststore"
     xmlns:ct="urn:ietf:params:xml:ns:yang:ietf-crypto-types">

     <!-- A bag of Certificate Bags -->
     <certificate-bags>

       <!-- Trust Anchor Certs for Authenticating Servers -->
       <certificate-bag>
         <name>trusted-server-ca-certs</name>
         <description>
           Trust anchors (i.e., CA certs) used to authenticate server
           certificates.  A server certificate is authenticated if its
           end-entity certificate has a chain of trust to one of these
           certificates.
         </description>
         <certificate>
           <name>Server Cert Issuer #1</name>
           <cert-data>BASE64VALUE=</cert-data>
         </certificate>
         <certificate>
           <name>Server Cert Issuer #2</name>
           <cert-data>BASE64VALUE=</cert-data>
         </certificate>
       </certificate-bag>

       <!-- End Entity Certs for Authenticating Servers -->
       <certificate-bag>
         <name>trusted-server-ee-certs</name>
         <description>
           Specific end-entity certificates used to authenticate server
           certificates.  A server certificate is authenticated if its
           end-entity certificate is an exact match to one of these
           certificates.
         </description>
         <certificate>
           <name>My Application #1</name>
           <cert-data>BASE64VALUE=</cert-data>
         </certificate>
         <certificate>
           <name>My Application #2</name>
           <cert-data>BASE64VALUE=</cert-data>
         </certificate>
       </certificate-bag>

       <!-- Trust Anchor Certs for Authenticating Clients -->
       <certificate-bag>
         <name>trusted-client-ca-certs</name>
         <description>
           Trust anchors (i.e., CA certs) used to authenticate client
           certificates.  A client certificate is authenticated if its
           end-entity certificate has a chain of trust to one of these
           certificates.
         </description>
         <certificate>
           <name>Client Identity Issuer #1</name>
           <cert-data>BASE64VALUE=</cert-data>
         </certificate>
         <certificate>
           <name>Client Identity Issuer #2</name>
           <cert-data>BASE64VALUE=</cert-data>
         </certificate>
       </certificate-bag>

       <!-- End Entity Certs for Authenticating Clients -->
       <certificate-bag>
         <name>trusted-client-ee-certs</name>
         <description>
           Specific end-entity certificates used to authenticate client
           certificates.  A client certificate is authenticated if its
           end-entity certificate is an exact match to one of these
           certificates.
         </description>
         <certificate>
           <name>George Jetson</name>
           <cert-data>BASE64VALUE=</cert-data>
         </certificate>
         <certificate>
           <name>Fred Flintstone</name>
           <cert-data>BASE64VALUE=</cert-data>
         </certificate>
       </certificate-bag>
     </certificate-bags>

     <!-- A List of Public Key Bags -->
     <public-key-bags>

       <!-- Public Keys for Authenticating SSH Servers -->
       <public-key-bag>
         <name>trusted-ssh-public-keys</name>
         <description>
           Specific SSH public keys used to authenticate SSH server
           public keys.  An SSH server public key is authenticated if
           its public key is an exact match to one of these public keys.

           This list of SSH public keys is analogous to OpenSSH's
           "/etc/ssh/ssh_known_hosts" file.
         </description>
         <public-key>
           <name>corp-fw1</name>
           <public-key-format>ct:ssh-public-key-format</public-key-form\
   at>
           <public-key>BASE64VALUE=</public-key>
         </public-key>
         <public-key>
           <name>corp-fw2</name>
           <public-key-format>ct:ssh-public-key-format</public-key-form\
   at>
           <public-key>BASE64VALUE=</public-key>
         </public-key>
       </public-key-bag>

       <!-- SSH Public Keys for Authenticating Application A -->
       <public-key-bag>
         <name>SSH Public Keys for Application A</name>
         <description>
           SSH public keys used to authenticate application A's SSH
           public keys.  An SSH public key is authenticated if it
           is an exact match to one of these public keys.
         </description>
         <public-key>
           <name>Application Instance #1</name>
           <public-key-format>ct:ssh-public-key-format</public-key-form\
   at>
           <public-key>BASE64VALUE=</public-key>
         </public-key>
         <public-key>
           <name>Application Instance #2</name>
           <public-key-format>ct:ssh-public-key-format</public-key-form\
   at>
           <public-key>BASE64VALUE=</public-key>
         </public-key>
       </public-key-bag>

       <!-- Raw Public Keys for TLS Servers -->
       <public-key-bag>
         <name>Raw Public Keys for TLS Servers</name>
         <public-key>
           <name>Raw Public Key #1</name>
           <public-key-format>ct:subject-public-key-info-format</public\
   -key-format>
           <public-key>BASE64VALUE=</public-key>
         </public-key>
         <public-key>
           <name>Raw Public Key #2</name>
           <public-key-format>ct:subject-public-key-info-format</public\
   -key-format>
           <public-key>BASE64VALUE=</public-key>
         </public-key>
       </public-key-bag>

       <!-- Raw Public Keys for TLS Clients -->
       <public-key-bag>
         <name>Raw Public Keys for TLS Clients</name>
         <public-key>
           <name>Raw Public Key #1</name>
           <public-key-format>ct:subject-public-key-info-format</public\
   -key-format>
           <public-key>BASE64VALUE=</public-key>
         </public-key>
         <public-key>
           <name>Raw Public Key #2</name>
           <public-key-format>ct:subject-public-key-info-format</public\
   -key-format>
           <public-key>BASE64VALUE=</public-key>
         </public-key>
       </public-key-bag>
     </public-key-bags>
   </truststore>

2.2.2.  A Certificate Expiration Notification

   The following example illustrates the "certificate-expiration"
   notification (per Section 2.1.4.7 of [RFC9640]) for a certificate
   configured in the truststore described in Section 2.2.1.

   =============== NOTE: '\' line wrapping per RFC 8792 ================

   <notification
     xmlns="urn:ietf:params:xml:ns:netconf:notification:1.0">
     <eventTime>2018-05-25T00:01:00Z</eventTime>
     <truststore xmlns="urn:ietf:params:xml:ns:yang:ietf-truststore">
       <certificate-bags>
         <certificate-bag>
           <name>trusted-client-ee-certs</name>
           <certificate>
             <name>George Jetson</name>
             <certificate-expiration>
               <expiration-date>2024-01-05T14:18:53-05:00</expiration-d\
   ate>
             </certificate-expiration>
           </certificate>
         </certificate-bag>
       </certificate-bags>
     </truststore>
   </notification>

2.2.3.  The "Local "Inline or Truststore" Groupings

   This section illustrates the various "inline-or-truststore" groupings
   defined in the "ietf-truststore" module, specifically the "inline-or-
   truststore-certs-grouping" (Section 2.1.3.3) and "inline-or-
   truststore-public-keys-grouping" (Section 2.1.3.4) groupings.

   These examples assume the existence of an example module called "ex-
   truststore-usage" that has the namespace "https://example.com/ns/
   example-truststore-usage".

   The "ex-truststore-usage" module is first presented using tree
   diagrams [RFC8340], followed by an instance example illustrating all
   the "inline-or-truststore" groupings in use, followed by the YANG
   module itself.

   The following tree diagram illustrates the "ex-truststore-usage"
   module without expanding the "grouping" statements:

   module: ex-truststore-usage
     +--rw truststore-usage
        +--rw cert* [name]
        |  +--rw name                                      string
        |  +---u ts:inline-or-truststore-certs-grouping
        +--rw public-key* [name]
           +--rw name                                            string
           +---u ts:inline-or-truststore-public-keys-grouping

   The following tree diagram illustrates the "ex-truststore-usage"
   module with all "grouping" statements expanded, enabling the
   truststore's full structure to be seen:

   module: ex-truststore-usage
     +--rw truststore-usage
        +--rw cert* [name]
        |  +--rw name                                  string
        |  +--rw (inline-or-truststore)
        |     +--:(inline) {inline-definitions-supported}?
        |     |  +--rw inline-definition
        |     |     +--rw certificate* [name]
        |     |        +--rw name                      string
        |     |        +--rw cert-data
        |     |        |       trust-anchor-cert-cms
        |     |        +---n certificate-expiration
        |     |                {certificate-expiration-notification}?
        |     |           +-- expiration-date    yang:date-and-time
        |     +--:(central-truststore)
        |              {central-truststore-supported,certificates}?
        |        +--rw central-truststore-reference?
        |                ts:central-certificate-bag-ref
        +--rw public-key* [name]
           +--rw name                                  string
           +--rw (inline-or-truststore)
              +--:(inline) {inline-definitions-supported}?
              |  +--rw inline-definition
              |     +--rw public-key* [name]
              |        +--rw name                 string
              |        +--rw public-key-format    identityref
              |        +--rw public-key           binary
              +--:(central-truststore)
                       {central-truststore-supported,public-keys}?
                 +--rw central-truststore-reference?
                         ts:central-public-key-bag-ref

   The following example provides two equivalent instances of each
   grouping, the first being a reference to a truststore and the second
   being defined inline.  The instance having a reference to a
   truststore is consistent with the truststore defined in
   Section 2.2.1.  The two instances are equivalent, as the inlined
   instance example contains the same values defined by the truststore
   instance referenced by its sibling example.

   =============== NOTE: '\' line wrapping per RFC 8792 ================

   <truststore-usage
     xmlns="https://example.com/ns/example-truststore-usage"
     xmlns:ct="urn:ietf:params:xml:ns:yang:ietf-crypto-types">

     <!-- The following two equivalent examples illustrate   -->
     <!-- the "inline-or-truststore-certs-grouping" grouping: -->

     <cert>
       <name>example 1a</name>
       <central-truststore-reference>trusted-client-ca-certs</central-t\
   ruststore-reference>
     </cert>

     <cert>
       <name>example 1b</name>
       <inline-definition>
         <certificate>
           <name>Client Identity Issuer #1</name>
           <cert-data>BASE64VALUE=</cert-data>
         </certificate>
         <certificate>
           <name>Client Identity Issuer #2</name>
           <cert-data>BASE64VALUE=</cert-data>
         </certificate>
       </inline-definition>
     </cert>

     <!-- The following two equivalent examples illustrate the -->
     <!-- "inline-or-truststore-public-keys-grouping" grouping: -->

     <public-key>
       <name>example 2a</name>
       <central-truststore-reference>trusted-ssh-public-keys</central-t\
   ruststore-reference>
     </public-key>

     <public-key>
       <name>example 2b</name>
       <inline-definition>
         <public-key>
           <name>corp-fw1</name>
           <public-key-format>ct:ssh-public-key-format</public-key-form\
   at>
           <public-key>BASE64VALUE=</public-key>
         </public-key>
         <public-key>
           <name>corp-fw2</name>
           <public-key-format>ct:ssh-public-key-format</public-key-form\
   at>
           <public-key>BASE64VALUE=</public-key>
         </public-key>
       </inline-definition>
     </public-key>

   </truststore-usage>

   Following is the "ex-truststore-usage" module's YANG definition:

   module ex-truststore-usage {
     yang-version 1.1;
     namespace "https://example.com/ns/example-truststore-usage";
     prefix etu;

     import ietf-truststore {
       prefix ts;
       reference
         "RFC 9641: A YANG Data Model for a Truststore";
     }

     organization
       "Example Corporation";

     contact
       "Author: YANG Designer <mailto:yang.designer@example.com>";

     description
       "This example module illustrates notable groupings defined
        in the 'ietf-truststore' module.";

     revision 2024-03-16 {
       description
         "Initial version.";
       reference
         "RFC 9641: A YANG Data Model for a Truststore";
     }

     container truststore-usage {
       description
         "An illustration of the various truststore groupings.";
       list cert {
         key "name";
         leaf name {
           type string;
           description
             "An arbitrary name for this cert.";
         }
         uses ts:inline-or-truststore-certs-grouping;
         description
           "A cert that may be configured locally or be
            a reference to a cert in the truststore.";
       }
       list public-key {
         key "name";
         leaf name {
           type string;
           description
             "An arbitrary name for this cert.";
         }
         uses ts:inline-or-truststore-public-keys-grouping;
         description
           "A public key that may be configured locally or be
            a reference to a public key in the truststore.";
       }
     }
   }

2.3.  YANG Module

   This YANG module imports modules from [RFC8341] and [RFC9640].

   <CODE BEGINS> file "ietf-truststore@2024-03-16.yang"
   module ietf-truststore {
     yang-version 1.1;
     namespace "urn:ietf:params:xml:ns:yang:ietf-truststore";
     prefix ts;

     import ietf-netconf-acm {
       prefix nacm;
       reference
         "RFC 8341: Network Configuration Access Control Model";
     }
     import ietf-crypto-types {
       prefix ct;
       reference
         "RFC 9640: YANG Data Types and Groupings for Cryptography";
     }

     organization
       "IETF NETCONF (Network Configuration) Working Group";
     contact
       "WG Web:   https://datatracker.ietf.org/wg/netconf
        WG List:  NETCONF WG list <mailto:netconf@ietf.org>
        Author:   Kent Watsen <kent+ietf@watsen.net>";
     description
       "This module defines a 'truststore' to centralize management
        of trust anchors, including certificates and public keys.

        The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
        'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
        'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
        are to be interpreted as described in BCP 14 (RFC 2119)
        (RFC 8174) when, and only when, they appear in all
        capitals, as shown here.

        Copyright (c) 2024 IETF Trust and the persons identified
        as authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms, with
        or without modification, is permitted pursuant to, and
        subject to the license terms contained in, the Revised
        BSD License set forth in Section 4.c of the IETF Trust's
        Legal Provisions Relating to IETF Documents
        (https://trustee.ietf.org/license-info).

        This version of this YANG module is part of RFC 9641
        (https://www.rfc-editor.org/info/rfc9641); see the RFC
        itself for full legal notices.";

     revision 2024-03-16 {
       description
         "Initial version.";
       reference
         "RFC 9641: A YANG Data Model for a Truststore";
     }

     /****************/
     /*   Features   */
     /****************/

     feature central-truststore-supported {
       description
         "The 'central-truststore-supported' feature indicates that
          the server supports the truststore (i.e., implements the
          'ietf-truststore' module).";
     }

     feature inline-definitions-supported {
       description
         "The 'inline-definitions-supported' feature indicates that
          the server supports locally defined trust anchors.";
     }

     feature certificates {
       description
         "The 'certificates' feature indicates that the server
          implements the /truststore/certificate-bags subtree.";
     }

     feature public-keys {
       description
         "The 'public-keys' feature indicates that the server
          implements the /truststore/public-key-bags subtree.";
     }

     /****************/
     /*   Typedefs   */
     /****************/

     typedef central-certificate-bag-ref {
       type leafref {
         path "/ts:truststore/ts:certificate-bags/"
            + "ts:certificate-bag/ts:name";
       }
       description
         "This typedef defines a reference to a certificate bag
          in the central truststore.";
     }

     typedef central-certificate-ref {
       type leafref {
         path "/ts:truststore/ts:certificate-bags/ts:certificate-bag"
            + "[ts:name = current()/../certificate-bag]/"
            + "ts:certificate/ts:name";
       }
       description
         "This typedef defines a reference to a specific certificate
          in a certificate bag in the central truststore.  This typedef
          requires that there exist a sibling 'leaf' node called
          'certificate-bag' that SHOULD have the
          'central-certificate-bag-ref' typedef.";
     }

     typedef central-public-key-bag-ref {
       type leafref {
         path "/ts:truststore/ts:public-key-bags/"
            + "ts:public-key-bag/ts:name";
       }
       description
         "This typedef defines a reference to a public key bag
          in the central truststore.";
     }

     typedef central-public-key-ref {
       type leafref {
         path "/ts:truststore/ts:public-key-bags/ts:public-key-bag"
            + "[ts:name = current()/../public-key-bag]/"
            + "ts:public-key/ts:name";
       }
       description
         "This typedef defines a reference to a specific public key
          in a public key bag in the truststore.  This typedef
          requires that there exist a sibling 'leaf' node called
          'public-key-bag' SHOULD have the
          'central-public-key-bag-ref' typedef.";
     }

     /*****************/
     /*   Groupings   */
     /*****************/
     // *-ref groupings

     grouping central-certificate-ref-grouping {
       description
         "Grouping for the reference to a certificate in a
          certificate-bag in the central truststore.";
       leaf certificate-bag {
         nacm:default-deny-write;
         if-feature "central-truststore-supported";
         if-feature "certificates";
         type ts:central-certificate-bag-ref;
         must '../certificate';
         description
           "Reference to a certificate-bag in the truststore.";
       }
       leaf certificate {
         nacm:default-deny-write;
         if-feature "central-truststore-supported";
         if-feature "certificates";
         type ts:central-certificate-ref;
         must '../certificate-bag';
         description
           "Reference to a specific certificate in the
            referenced certificate-bag.";
       }
     }

     grouping central-public-key-ref-grouping {
       description
         "Grouping for the reference to a public key in a
          public-key-bag in the central truststore.";
       leaf public-key-bag {
         nacm:default-deny-write;
         if-feature "central-truststore-supported";
         if-feature "public-keys";
         type ts:central-public-key-bag-ref;
         description
           "Reference of a public key bag in the truststore, including
            the certificate to authenticate the TLS client.";
       }
       leaf public-key {
         nacm:default-deny-write;
         if-feature "central-truststore-supported";
         if-feature "public-keys";
         type ts:central-public-key-ref;
         description
           "Reference to a specific public key in the
            referenced public-key-bag.";
       }
     }

     // inline-or-truststore-* groupings

     grouping inline-or-truststore-certs-grouping {
       description
         "A grouping for the configuration of a list of certificates.
          The list of certificates may be defined inline or as a
          reference to a certificate bag in the central truststore.

          Servers that wish to define alternate truststore locations
          MUST augment in custom 'case' statements, enabling
          references to those alternate truststore locations.";
       choice inline-or-truststore {
         nacm:default-deny-write;
         mandatory true;
         description
           "A choice between an inlined definition and a definition
            that exists in the truststore.";
         case inline {
           if-feature "inline-definitions-supported";
           container inline-definition {
             description
               "A container for locally configured trust anchor
                certificates.";
             list certificate {
               key "name";
               min-elements 1;
               description
                 "A trust anchor certificate or chain of certificates.";
               leaf name {
                 type string;
                 description
                   "An arbitrary name for this certificate.";
               }
               uses ct:trust-anchor-cert-grouping {
                 refine "cert-data" {
                   mandatory true;
                 }
               }
             }
           }
         }
         case central-truststore {
           if-feature "central-truststore-supported";
           if-feature "certificates";
           leaf central-truststore-reference {
             type ts:central-certificate-bag-ref;
             description
               "A reference to a certificate bag that exists in the
                central truststore.";
           }
         }
       }
     }

     grouping inline-or-truststore-public-keys-grouping {
       description
         "A grouping that allows the public keys to either be
          configured locally, within the data model being used, or be a
          reference to a public key bag stored in the truststore.

          Servers that wish to define alternate truststore locations
          SHOULD augment in custom 'case' statement, enabling
          references to those alternate truststore locations.";
       choice inline-or-truststore {
         nacm:default-deny-write;
         mandatory true;
         description
           "A choice between an inlined definition and a definition
            that exists in the truststore.";
         case inline {
           if-feature "inline-definitions-supported";
           container inline-definition {
             description
               "A container to hold local public key definitions.";
             list public-key {
               key "name";
               description
                 "A public key definition.";
               leaf name {
                 type string;
                 description
                   "An arbitrary name for this public key.";
               }
               uses ct:public-key-grouping;
             }
           }
         }
         case central-truststore {
           if-feature "central-truststore-supported";
           if-feature "public-keys";
           leaf central-truststore-reference {
             type ts:central-public-key-bag-ref;
             description
               "A reference to a bag of public keys that exists
                in the central truststore.";
           }
         }
       }
     }

     // the truststore grouping

     grouping truststore-grouping {
       description
         "A grouping definition that enables use in other contexts.
          Where used, implementations MUST augment new 'case'
          statements into the various inline-or-truststore 'choice'
          statements to supply leafrefs to the model-specific
          location(s).";
       container certificate-bags {
         nacm:default-deny-write;
         if-feature "certificates";
         description
           "A collection of certificate bags.";
         list certificate-bag {
           key "name";
           description
             "A bag of certificates.  Each bag of certificates should
              be for a specific purpose.  For instance, one bag could
              be used to authenticate a specific set of servers, while
              another could be used to authenticate a specific set of
              clients.";
           leaf name {
             type string;
             description
               "An arbitrary name for this bag of certificates.";
           }
           leaf description {
             type string;
             description
               "A description for this bag of certificates.  The
                intended purpose for the bag SHOULD be described.";
           }
           list certificate {
             key "name";
             description
               "A trust anchor certificate or chain of certificates.";
             leaf name {
               type string;
               description
                 "An arbitrary name for this certificate.";
             }
             uses ct:trust-anchor-cert-grouping {
               refine "cert-data" {
                 mandatory true;
               }
             }
           }
         }
       }
       container public-key-bags {
         nacm:default-deny-write;
         if-feature "public-keys";
         description
           "A collection of public key bags.";
         list public-key-bag {
           key "name";
           description
             "A bag of public keys.  Each bag of keys SHOULD be for
              a specific purpose.  For instance, one bag could be used
              to authenticate a specific set of servers, while another
              could be used to authenticate a specific set of clients.";
           leaf name {
             type string;
             description
               "An arbitrary name for this bag of public keys.";
           }
           leaf description {
             type string;
             description
               "A description for this bag of public keys.  The
                intended purpose for the bag MUST be described.";
           }
           list public-key {
             key "name";
             description
               "A public key.";
             leaf name {
               type string;
               description
                 "An arbitrary name for this public key.";
             }
             uses ct:public-key-grouping;
           }
         }
       }
     }

     /*********************************/
     /*   Protocol-accessible nodes   */
     /*********************************/

     container truststore {
       if-feature "central-truststore-supported";
       nacm:default-deny-write;
       description
         "The truststore contains bags of certificates and
          public keys.";
       uses truststore-grouping;
     }
   }
   <CODE ENDS>

3.  Support for Built-In Trust Anchors

   In some implementations, a server may define some built-in trust
   anchors.  For instance, there may be built-in trust anchors enabling
   the server to securely connect to well-known services (e.g., a Secure
   Zero Touch
   Zero-Touch Provisioning (SZTP) [RFC8572] bootstrap server) or public
   certificate authority
   Certification Authority (CA) certificates to connect to arbitrary web
   services using public PKI.

   Built-in trust anchors are expected to be set by a vendor-specific
   process.  Any ability for operators to set and/or modify built-in
   trust anchors is outside the scope of this document.

   The primary characteristic of the built-in trust anchors is that they
   are provided by the server, as opposed to configuration.  As such,
   they are present in <operational> (Section 5.3 of [RFC8342]) and
   <system> [NETMOD-SYSTEM-CONFIG], if implemented.

   The example below illustrates what the truststore in <operational>
   might look like for a server in its factory default state.  Note that
   the built-in trust anchor bags have the "or:origin" annotation value
   "or:system".

   <truststore
     xmlns="urn:ietf:params:xml:ns:yang:ietf-truststore"
     xmlns:ct="urn:ietf:params:xml:ns:yang:ietf-crypto-types"
     xmlns:or="urn:ietf:params:xml:ns:yang:ietf-origin"
     or:origin="or:intended">
     <certificate-bags>

       <certificate-bag or:origin="or:system">
         <name>Built-In Manufacturer Trust Anchor Certificates</name>
         <description>
           Certificates built into the device for authenticating
           manufacturer-signed objects, such as TLS server certificates,
           vouchers, etc.
         </description>
         <certificate>
           <name>Manufacturer Root CA Cert</name>
           <cert-data>BASE64VALUE=</cert-data>
         </certificate>
       </certificate-bag>

       <certificate-bag or:origin="or:system">
         <name>Built-In Public Trust Anchor Certificates</name>
         <description>
           Certificates built into the device for authenticating
           certificates issued by public certificate authorities,
           such as the end-entity certificate for web servers.
         </description>
         <certificate>
           <name>Public Root CA Cert 1</name>
           <cert-data>BASE64VALUE=</cert-data>
         </certificate>
         <certificate>
           <name>Public Root CA Cert 2</name>
           <cert-data>BASE64VALUE=</cert-data>
         </certificate>
         <certificate>
           <name>Public Root CA Cert 3</name>
           <cert-data>BASE64VALUE=</cert-data>
         </certificate>
       </certificate-bag>

     </certificate-bags>
   </truststore>

4.  Security Considerations

4.1.  Security of Data at Rest

   The YANG module specified in this document defines a mechanism called
   a "truststore" that, by its name, suggests that its contents are
   protected from unauthorized modification.

   Security controls for the API (i.e., data in motion) are discussed in
   Section 4.3, but controls for the data at rest (e.g., on disk) cannot
   be specified by the YANG module.

   In order to satisfy the expectations of a "truststore", server
   implementations MUST ensure that the truststore contents are
   protected from unauthorized modifications when at rest.

4.2.  Unconstrained Public Key Usage

   This module enables the configuration of public keys without
   constraints on their usage, e.g., what operations the key is allowed
   to be used for (encryption, verification, or both).

   Trust anchors configured via this module are implicitly trusted to
   validate certification paths that may include any name, be used for
   any purpose, or be subject to constraints imposed by an intermediate
   CA or by context in which the truststore is used.  Implementations
   are free to use alternative or auxiliary structures and validation
   rules to define constraints that limit the applicability of a trust
   anchor.

4.3.  Considerations for the "ietf-truststore" YANG Module

   This section follows is modeled after the template defined in Section 3.7.1
   of [RFC8407].

   The “ietf-truststore" YANG module defined in this document is defines "grouping” and “container”
   statements that are designed to be accessed via YANG-based management protocols
   protocols, such as NETCONF [RFC6241] and RESTCONF [RFC8040].  Both of these  These
   protocols have mandatory-to-
   implement mandatory-to-implement secure transport layers (e.g.,
   Secure Shell (SSH), TLS)
   with (SSH) [RFC4252], TLS [RFC8446], and QUIC [RFC9000]) and
   mandatory-to-implement mutual authentication.

   The Network Configuration Access Control Model (NACM) [RFC8341]
   provides the means to restrict access for particular users to a
   preconfigured subset of all available protocol operations and
   content.

   Please be aware that this YANG module uses groupings from other YANG
   modules that define nodes that may be considered sensitive or
   vulnerable in network environments.  Please review the security
   considerations for dependent YANG modules for information as to which
   nodes may be considered sensitive or vulnerable in network
   environments.

   Most of the readable data nodes defined in this YANG module are not
   considered sensitive or vulnerable in network environments.  However,
   the "cert-data" node uses the NACM "default-deny-all" extension for
   reasons described in Section 3.8 of [RFC9640].

   All the writable data nodes defined by this module, both in the
   "grouping" statements as well as the protocol-accessible "truststore"
   instance, may be considered sensitive or vulnerable in some network
   environments.  For instance, any modification to a trust anchor or
   reference to a trust anchor may dramatically alter the implemented
   security policy.  For this reason, the NACM "default-deny-write"
   extension has been set for all data nodes defined in this module.

   This module does not define any "rpc" or "action" statements, and
   thus, the security considerations for such are not provided here.

5.  IANA Considerations

5.1.  The IETF XML Registry

   IANA has registered the following URI in the "ns" registry defined of
   the "IETF XML Registry" [RFC3688].

   URI:  urn:ietf:params:xml:ns:yang:ietf-truststore
   Registrant Contact:  The IESG
   XML:  N/A; the requested URI is an XML namespace.

5.2.  The YANG Module Names Registry

   IANA has registered the following YANG module in the "YANG Module
   Names" registry defined in [RFC6020].

   Name:  ietf-truststore
   Namespace:  urn:ietf:params:xml:ns:yang:ietf-truststore
   Prefix:  ts
   Reference:  RFC 9641

6.  References

6.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC4252]  Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH)
              Authentication Protocol", RFC 4252, DOI 10.17487/RFC4252,
              January 2006, <https://www.rfc-editor.org/info/rfc4252>.

   [RFC6241]  Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
              and A. Bierman, Ed., "Network Configuration Protocol
              (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
              <https://www.rfc-editor.org/info/rfc6241>.

   [RFC6242]  Wasserman, M., "Using the NETCONF Protocol over Secure
              Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011,
              <https://www.rfc-editor.org/info/rfc6242>.

   [RFC7950]  Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
              RFC 7950, DOI 10.17487/RFC7950, August 2016,
              <https://www.rfc-editor.org/info/rfc7950>.

   [RFC8040]  Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
              Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
              <https://www.rfc-editor.org/info/rfc8040>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8341]  Bierman, A. and M. Bjorklund, "Network Configuration
              Access Control Model", STD 91, RFC 8341,
              DOI 10.17487/RFC8341, March 2018,
              <https://www.rfc-editor.org/info/rfc8341>.

   [RFC8446]  Rescorla, E., "The Transport Layer Security (TLS) Protocol
              Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
              <https://www.rfc-editor.org/info/rfc8446>.

   [RFC9000]  Iyengar, J., Ed. and M. Thomson, Ed., "QUIC: A UDP-Based
              Multiplexed and Secure Transport", RFC 9000,
              DOI 10.17487/RFC9000, May 2021,
              <https://www.rfc-editor.org/info/rfc9000>.

   [RFC9640]  Watsen, K., "YANG Data Types and Groupings for
              Cryptography", RFC 9640, DOI 10.17487/RFC9640, August September
              2024, <https://www.rfc-editor.org/info/rfc9640>.

6.2.  Informative References

   [HTTP-CLIENT-SERVER]
              Watsen, K., "YANG Groupings for HTTP Clients and HTTP
              Servers", Work in Progress, Internet-Draft, draft-ietf-
              netconf-http-client-server-23, 15 August 2024,
              <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
              http-client-server-23>.

   [NETCONF-CLIENT-SERVER]
              Watsen, K., "NETCONF Client and Server Models", Work in
              Progress, Internet-Draft, draft-ietf-netconf-netconf-
              client-server-37, 14 August 2024,
              <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
              netconf-client-server-37>.

   [NETMOD-SYSTEM-CONFIG]
              Ma, Q., Wu, Q., and C. Feng, "System-defined
              Configuration", Work in Progress, Internet-Draft, draft-
              ietf-netmod-system-config-08, 18 June 2024,
              <https://datatracker.ietf.org/doc/html/draft-ietf-netmod-
              system-config-08>.

   [RESTCONF-CLIENT-SERVER]
              Watsen, K., "RESTCONF Client and Server Models", Work in
              Progress, Internet-Draft, draft-ietf-netconf-restconf-
              client-server-38, 14 August 2024,
              <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
              restconf-client-server-38>.

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004,
              <https://www.rfc-editor.org/info/rfc3688>.

   [RFC4648]  Josefsson, S., "The Base16, Base32, and Base64 Data
              Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006,
              <https://www.rfc-editor.org/info/rfc4648>.

   [RFC6020]  Bjorklund, M., Ed., "YANG - A Data Modeling Language for
              the Network Configuration Protocol (NETCONF)", RFC 6020,
              DOI 10.17487/RFC6020, October 2010,
              <https://www.rfc-editor.org/info/rfc6020>.

   [RFC8259]  Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
              Interchange Format", STD 90, RFC 8259,
              DOI 10.17487/RFC8259, December 2017,
              <https://www.rfc-editor.org/info/rfc8259>.

   [RFC8340]  Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams",
              BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018,
              <https://www.rfc-editor.org/info/rfc8340>.

   [RFC8342]  Bjorklund, M., Schoenwaelder, J., Shafer, P., Watsen, K.,
              and R. Wilton, "Network Management Datastore Architecture
              (NMDA)", RFC 8342, DOI 10.17487/RFC8342, March 2018,
              <https://www.rfc-editor.org/info/rfc8342>.

   [RFC8407]  Bierman, A., "Guidelines for Authors and Reviewers of
              Documents Containing YANG Data Models", BCP 216, RFC 8407,
              DOI 10.17487/RFC8407, October 2018,
              <https://www.rfc-editor.org/info/rfc8407>.

   [RFC8572]  Watsen, K., Farrer, I., and M. Abrahamsson, "Secure Zero
              Touch Provisioning (SZTP)", RFC 8572,
              DOI 10.17487/RFC8572, April 2019,
              <https://www.rfc-editor.org/info/rfc8572>.

   [RFC8792]  Watsen, K., Auerswald, E., Farrel, A., and Q. Wu,
              "Handling Long Lines in Content of Internet-Drafts and
              RFCs", RFC 8792, DOI 10.17487/RFC8792, June 2020,
              <https://www.rfc-editor.org/info/rfc8792>.

   [RFC9642]  Watsen, K., "A YANG Data Model for a Keystore and Keystore
              Operations", Keystore", RFC 9642,
              DOI 10.17487/RFC9642, August September 2024,
              <https://www.rfc-editor.org/info/rfc9642>.

   [RFC9643]  Watsen, K. and M. Scharf, "YANG Groupings for TCP Clients
              and TCP Servers", RFC 9643, DOI 10.17487/RFC9643, August
              September 2024, <https://www.rfc-editor.org/info/rfc9643>.

   [RFC9644]  Watsen, K., "YANG Groupings for SSH Clients and SSH
              Servers", RFC 9644, DOI 10.17487/RFC9644, August September 2024,
              <https://www.rfc-editor.org/info/rfc9644>.

   [RFC9645]  Watsen, K., "YANG Groupings for TLS Clients and TLS
              Servers", RFC 9645, DOI 10.17487/RFC9645, August September 2024,
              <https://www.rfc-editor.org/info/rfc9645>.

   [W3C.REC-xml-20081126]
              Bray, T., Paoli, J., Sperberg-McQueen, C.M., Maler, E.,
              and F. Yergeau, "Extensible Markup Language (XML) 1.0
              (Fifth Edition)", World Wide Web Consortium
              Recommendation REC-xml-20081126, November 2008,
              <https://www.w3.org/TR/2008/REC-xml-20081126/>.

Acknowledgements

   The authors especially thank Henk Birkholz for contributing YANG to
   the "ietf-truststore" module supporting raw public keys and PSKs
   (pre-shared or pairwise-symmetric keys).  While these contributions
   were eventually replaced by reusing the existing support for
   asymmetric and symmetric trust anchors, respectively, it was only
   through Henk's initiative that the WG was able to come to that
   result.

   The authors additionally thank the following for helping give shape
   to this work (ordered by first name): Balázs Kovács, Carl Wallace,
   Eric Voit, Éric Vyncke, Francesca Palombini, Jensen Zhang, Jürgen
   Schönwälder, Lars Eggert, Liang Xia, Martin Björklund, Murray
   Kucherawy, Nick Hancock, Paul Kyzivat, Qin Wu, Rob Wilton, Robert
   Varga, Roman Danyliw, and Yoav Nir.

Author's Address

   Kent Watsen
   Watsen Networks
   Email: kent+ietf@watsen.net